Installing a JDM Spoiler / Wing on my OFF ROAD Honda CRV | RD1 RD2 RD3

[@carsonhuncovsky3541]

I have a 99 RD1 crv and you are giving me pure inspiration for my build. Don't stop making the CR-yeeter better.

[@hondaresource]

Thank you

[@RandomlnternetGuy]

This series REALLY makes me want to scoop a CRV and supercharge it!

[@hondaresource]

you should! I wouldn't mind having one myself!

[@thenewkidontheblok]

I have one in Texas ready for you

[@ThreePhase123]

I've been looking for a clean-ish one myself.

[@RandomlnternetGuy]

@@thenewkidontheblok Lol drive to Canada and sell it to me

[@thenewkidontheblok]

@@RandomlnternetGuy crap lol

[@LatinoAD]

Oh yes. We spoke of this in person at your place 🥺💜. Best channel on youtube to me. That spoiler is nice and rare. Looks dope.

[@hondaresource]

Thank you Kev! I'm glad you got to stop by

[@LatinoAD]

@@hondaresource Super. I'm your biggest fan like Stan to Eminem lol. Y'all have a great night. CR-V is nice.

[@huseyintaylan1981]

Bu video çok işime yaradı. Evrenin sırrını bulmuş kadar mutlu olmamı sağladı. Teşekkürler dostum 😊🙏

[@waynecasper5346]

Thanks for getting around to posting a video on the spoiler. I really think they help the looks of the car. I would like to get one and there quite a few on the market from $56 to nearly $200 bucks but I haven’t found any reviews on them but one and it was about half and half good and bad as far as the fit went. Some say comes with break lite but when read further down it will say just spoiler no lite. 🤷🏼‍♂️ so what’s a fellow to do hahahahahaha. But anyway I think you’re right about taking the header panel off to drill the holes rather than with it attached to the car because there was another guy that drilled it on the car and he said that he had to Waller the hole out on one side because he missed by a little bit when drilling them. I’m 74 years old and long time hot rodder and have owned many many tri fives and Chevy ll and Nova’s and Chevelle’s these can be made to run and look good. Is why I like them mine is a 97 AWD with fairly low mile 131000 on the clock. Good inexpensive little hot rod compared to the vintage cars. Think I want to raise the front up about a inch and the rear 2” because the front now is higher to get a little more ground clearance with some spacers rather than struts and shocks. But anyway thanks again and I’ll be watching for your next video on what ever you decide to get in to. Haha

[@hondaresource]

Thank you!

[@Couture.m]

I'm building a sun shade for the front

[@ElReySupr3me]

She is looking good.

[@hondaresource]

Thank you, I appreciate it

[@alejandrovinardi7331]

Will the PLM header work with stock cat? I'm confused with the description. Thanks in advance and keep up the awesome work and content.

[@hondaresource]

I see that now. The top part of the description is from PLM website, I added that at the bottom myself after seeing some comments from PLM. I'll inquire from my contact and update it accordingly

[@hondaresource]

Just got off the phone with them, it will work with the stock cat, but it won't have the donut gasket, it'll come with a gasket to mate it to the cat.

[@alejandrovinardi7331]

@@hondaresource thank you! That was quick!

[@thedavecave833]

Found a JDM spoiler, but no hardware. What did you use for hardware?

[@hondaresource]

Regular ol m6 bolts

[@thedavecave833]

@@hondaresource ty

[@Frost_Tiger]

I wish I got a new exhaust when my dad's crv fell off had to bunge it for a min and spent I think $200- $300 to patch a couple holes 😅 and definitely that ass.... sticker 😏 😄 if I run into a spoiler definitely getting it also I ran into a roof rack for my dad's crv whenever he's ready gonna put that on

[@hondaresource]

Sheeeesh

[@Frost_Tiger]

@@hondaresource yeah that sucked and I had to get my flex part of my exhaust on my mdx fixed too cause of that last guy's that pit a trans in snapped the bracket bolts off so that's why that broke 😅

[@flugsvampen]

It seems like the european version looks a bit different, apparently made in Austria. In that version its completely solid without that "hole" between the mounting positions, also no integrated brakelights.

[@hondaresource]

Hmmm, I'm not sure. I got lucky with mine I suppose

[@bizzylivinlyfe7838]

Nice video Crv looks nice man and about those headers do you have them installed cause I'm interested to hear the sound love the rd1 vids

[@hondaresource]

I don't yet, I do plan to get one here to do a video on it though

[@nunuwilson7736]

I am digging dat sticker😁

[@hondaresource]

I'm going to get some made to sell

[@a01252]

Do you know if the jdm rd1 came with a 3rd break light if you didn't have the factory spoiler? Ive noticed several with no 3rd.

[@Jason-nk4yr]

How much that header going to run? I know the 1320 one are stupid expensive.

[@hondaresource]

List is $350 but my site is a little cheaper with the discount code

[@davidcarey5663]

Is it possible to get the honda resource decal you have on the back window ?

[@hondaresource]

I only had this one made.

[@tyronemccoy3102]

I have a spoiler, however I wanted one with the shiny bits on it. Would you know they are sold in that configuration?

[@hondaresource]

The oem spoiler has chrome in the center like this one

[@willbroccolo8389]

Not on topic but have you ever thought of plugging up the upper plenum for more hp on an rd1?

[@hondaresource]

I wouldn't, that gives you extra torque

[@Rota_rd1]

Thanks for the code saved 35 for the header

[@hondaresource]

No prob, gotta look out for my people

[@okoyum]

I’m in Australia.. really want to source an Oem spoiler. Where do I start?

[@hondaresource]

No idea, I got lucky and scored this one from one I bought to resell

[@Jason-nk4yr]

The oem spoiler is gold. The aftermarket market ones are ok..( 5 foot,five miles a hour). I have both. Oem so much better fitment. Ebay still looks good but fits like shit.

[@hondaresource]

I'm happy I have one

[@Rota_rd1]

I bought the 150 dollar replica spoiler no chrome and it fits flush.

[@willbroccolo8389]

Did those come stock in the USA?

[@hondaresource]

I don't think so, but they are available online

[@willbroccolo8389]

@@hondaresource cool. Keep up the good work my dude! I love your channel.

[@hondaresource]

@@willbroccolo8389 thank you man

[@willbroccolo8389]

I share your stuff with all the local CRV nuts here in Utah. We all love your shit.

[@hondaresource]

@@willbroccolo8389 I appreciate that man!

[@Martin-s2i]

Upgrade auto to manual 5 sp

[@Brxxtonn]

Where can I get ahold of a oem spoiler?

[@hondaresource]

eBay, Facebook groups, etc

[@stephentalbot3256]

Cool looking good

[@eddiesjdmprojects7343]

Is the plm header carb legal?

[@ElReySupr3me]

Most likely isn't

[@hondaresource]

No sir

[@jeremymendez9208]

OH YEAHHHHHH RESOURCE TIMEEEEE

[@hondaresource]

yeeyee

[@tyronemccoy3102]

I’m looking for that spoiler…you want to sell it?

[@hondaresource]

No sir

[@tyronemccoy3102]

@ thanks…it referred me to EBay

[@richmondahinful2633]

Hello

[@МиколаВітковський-щ4и]

👍 Super! 🇺🇦

[@hondaresource]

Thank you