Boomhauer’s 669hp LS3 Engine NEEDS Big Brakes!

[@HooniganProjectGarage]

Do you think Zac installed a Big Brake Kit to actually slow down or just to do better Sitter’ Burnouts?

[@joshyoung4718]

Never seen him really race, id say for better big sitters!

[@liamforbes6253]

Big sitter' all day 👌

[@georgefloydhadasthma9133]

One doesn't get dont die tattooed in there firearms because there planing on being sensible

[@glenportanovajr698]

For both u silly bastards

[@Diablothein]

Yes.

[@_wattage596]

The moment where Zac swaps a whole motor and fuel system in the time Scotto fixes a bolt....

[@HooniganProjectGarage]

Was Scotto’s bolt episode your favorite staff inspection Video?

[@Sudoku404]

Hoonigan Project Cars not gonna lie I didn’t catch on till someone pointed it out. Scotty somehow made a entire episode entertaining on a single bolt.

[@redlion145]

@@Sudoku404 It wasn't that entertaining. I'd have rather seen the Audi run, rather than have pretty bolts and not run.

[@Sudoku404]

Irish Identity to each their own but I think the point of this channel is the process to start up the more stuff the better. and if he didn’t do that one bolt most likely would’ve been stuck for another several months to get the part

[@_wattage596]

It was actually great content showing how to properly restore old components.

[@coltonmcrae5873]

I love how quickly this went from "cheap daily to haul my bikes" to a nearly 700hp track ready race truck.

[@HooniganProjectGarage]

It’s an excuse to get from the Donut Garage to the Burnyard quicker and safer.... It’s a “work” investment...

[@SuperSilvi1990]

The famous saying...."I'm just going to keep it stock......"

[@2100Awesome]

He’ll still be able to haul his bikes around... Just at a much faster rate now.

[@Juggalo10p]

@@HooniganProjectGarage he should claim it on his taxes

[@CTemple82]

Zac really knocked it out the park and did his research on getting all the best of the best parts to build one sick ass truck. Man this truck is mechanically brand new top to bottom. Awesome job sir. You’ve got one beast of a truck!

[@daileydroneservices]

Just did Painless on my 1971 k20 Cheyenne. Best decision I've ever made. It's amazing, customer support is quick to reply too.

[@fmx623]

and this my amigos is how you properly build a project vehicle. it’s very satisfying to watch how all the upgrades just bolt right up. that means good research was done and quality parts were bought. props to you zac.

[@HooniganProjectGarage]

Just like any good project it all started with a Parts List. Zac knew what he wanted, and made it happen!

[@snikwad003]

If it bolts on it ain't custom

[@fmx623]

snikwad003 how do you think these companies designed their parts? they were custom designed and built.

[@TxJonathan]

This is by far my favorite build, I love how y'all are doing more truck videos like the build off with the s10

[@JackCZSR]

Love seeing everyone working on their projects! Keep up the good content everyone!

[@benjamincolumbus]

Damn. Zac's builds are probably the nicest, most thorough builds of anything on this channel.

[@JDelorme1989]

Bro this truck is going to be sick! I love watching this build come together. This is my dream to build a truck like this with my son. Keep the content coming and can't wait to here you start is fine peice of American machinery!

[@HooniganProjectGarage]

The Bald Eagles will be flyin’ and the Tires will be Dyin’.

[@JDelorme1989]

I can't wait to see it!

[@mattypp2298]

Can I buy all ur old stuff? IE: sniper efi, old brake stuff basically anything u took off lol. I got a 73 Chevy Cheyenne super I’m working on with my son. Got the truck from my grandpa who bought it original. Please help!!! Love it by the way zac!!!

[@dilligafdude9434]

No.

[@michaelmandel7353]

Zac - "Hot gas doesn't equal good things." The Sun - "Am I a joke to you?"

[@redlion145]

Technically it's plasma, but I take your point :P

[@lanceuppercut6168]

I... don't get it?

[@AndrewB23]

@@lanceuppercut6168 they made a bad joke about the sun being hot gas and Zac said hot gas is bad

[@yeahitsak20]

awe man the old c10 has a special place in my heart my pops had one he used as a farm truck with a small block 400 that i learned to drive when i was about 10 or so

[@Miragedude28]

I like the way Zac does things, so organised.

[@ghosteh6503]

Matthew botha he sounds like he is a very organized person or really ocd

[@OlDustyTrails]

Quality dude with a quality build, showing us all how to do it right.... Save up for the good right parts and do it the best you can with alot of research and ensuring you know what you want. Can't wait to hear that C-10 V8 CHOP!!!!

[@jaseroods1763]

Whoever is running this comment section for hoonigan is the goat 😂 I can’t handle some of the responses 😂

[@HooniganProjectGarage]

If I was a goat I’d have a hard time typing with my Hooves. 😉👍🏼 Appreciate your comment man!

[@JLHskids]

@@HooniganProjectGarage lmao

[@a456987]

@@HooniganProjectGarage 🤣🤣🤣

[@Foxtooth88]

My favorite part of this series is how Zac is doing this on the floor, like a weekend garage project. Reminds of the good old days helping my dad work on his old truck. I’m sure a lift would be way easier, but still appreciate it guys.

[@neekshernandez5894]

Dude I legitimately get hyped. Amped. Adrenaline when I see a new episode of the c-10. FUGGIN SIICK🤟🏽

[@HooniganProjectGarage]

You know if Zac is on a project shits about to go down.

[@SwingKingsGolf]

@@HooniganProjectGarage Hert is that you?!

[@marktinsley1477]

Damn dude you got me drooling. I’m 23 when I was 20 I got 85 gmc first vehicle I actually started wrenching on. I swapped the 305 with gm good wrench 350 blew 2.73 10 bolt put in a 12 bolt 3.73 factory posi out of a 71 c10 also when through a couple th350 tranies. Wrapped that truck around a tree (got really lucky) and drove it 50 miles home. So found a 87 c10 with no steering, engine, trans, or brakes got it for 500. Over a month replaced majority of front suspension, pulled core support, inner fenders, gutted all interior, wiring, and any thing that was trash or would be replacing with the parts from wrecked truck ( which I was still using as a daily). So took my week vacation from work and swapped drive line radiator to rear-end, complete interior, doors, core support, and wired the complete truck (never wired anything before). Got it done to daily to work in one week by myself. 100% sure I’ve touched every bolt on the truck. With my age and budget only been able to dream of the stuff your using really enjoying the build it’s gonna be wicked!

[@w.j.hammer5902]

Man I have been thinking about building one of these trucks for sometime to do all sort of things with. This series really gets the wheels turning in my head. These trucks are so easy to build from mild to wild.

[@Kinganytime]

Let me use the lift real quick to change my oil on the 33 😘

[@Sk1m_Beeble]

Or don't so it blows up quickly so you can swap a Barra in sooner.

[@dilligafdude9434]

It's called a floor jack and some jack stands, my guy.

[@jamescorvett]

Ive been using Holley ext fuel pumps since the late 80s, they've never let me down. the place i chose to install it, a few times. this builds coming right along.

[@kylehoover7463]

This build is badass! Texas Speed for the win!

[@randomjokers7185]

Easily my favorite Staff Inspection ride. Zac is all in on this truck!

[@HooniganProjectGarage]

Started off to be a daily driver Chopper Hauler. Now it’s a full on Tire Killer. There is no stopping Zac now.

[@hildingerkyle]

I love how the beginning of the video you opened up to the toolbox look for a wrench and it looks just like my dad's toolbox of my childhood. S*** everywhere but I know it's in there(3:23)

[@benostern9377]

The suspension and brake set up is looking super clean. Looking forward to hearing some chop. Stoked for you zac

[@HooniganProjectGarage]

It’s built to kill the Burnyard, we’re all ready for the chop!

[@mcanderson0]

QUESTION: yall have fans that have seen every single shred of content that yall create... but is there anyone at Hoonigan that legit has seen every single shred of content?

[@HooniganProjectGarage]

Yes, the entire crew here watches every video multiple time before it drops. Walled consider your self an OG.

[@iancuevas9922]

Dude I'm freakin loving it bro keep it up. I'd die to be able to build something like this and your doing a phenomenal job and I can't even imagine I'm end product

[@BIGREDTECH]

Texas speed, Holley performance and bald eagles y’all been hangin around McFarland fab too much lol

[@HooniganProjectGarage]

We have the same taste in Horsepower... Texas Speed have been building the baddest ass LS’s around.

[@BIGREDTECH]

I agree with you guys there!

[@justdave100]

Wilwood stuff always looks so good 😍

[@NCFREEMAN]

Truck is looking sick Zach!!!!

[@leighharron]

This is great content, thank you Hoonigan for providing shows people want to watch. And way to go Zac for getting things done 👍🏻

[@V8.77]

Zac hell yeah brother! Always a good time when Zac is involved

[@HooniganProjectGarage]

The man partied hard, and builds harder. #modelotime

[@rowndo]

I love Zack being serious.

[@eagleeyes221]

zac you can use this stuff called fire sleeve to cover your fuel lines. its a fiberglass and silicone sleeve. i used it on both my fuel lines and my hydraulic clutch line to keep fluids from boiling

[@jaerylflores1587]

Love how this is coming! Tell Danger Dan to continue his 2JZ project!

[@79ped]

Been waiting ! Please Hoonigan - just let Zac work on his car in shophours.. hell, give him a new project after this ! Love the C10 built and the way Zac does it

[@HooniganProjectGarage]

Zac works on his cars when he wants to work on them. Shop hours = when ever Zac wants.

[@joshuaespericueta2474]

I can’t wait to see more! This is goals for mine I was broke and went with intellitronix gauges

[@mattshearer89]

Zac's concentration voice under the truck is a lot less wrestling commentator like 😂

[@NinjaJerky]

Man do y'all have a spirit playlist it's always cool to chill and watch you guys work. Zac's build is gonna be so 🔥🔥🔥!

[@mattshearer89]

That is some sexy music playing too!

[@luisk6007]

Zac's C10 is now my favorite staff build. At least until Varg- I mean Hert gets back building his FD.

[@motoray69]

Throw some fire sleeve on that fuel line near the headers and you will be good to go! Build looks awesome!

[@HooniganProjectGarage]

Now that everything is measured in cut, we will go through the details next.

[@alexkeawe]

It's looking clean as hell so far, keep up the good work

[@808smycarbreaks_9]

Heck yeah! Wilwood!!!!!!

[@billshreddguymonroe8831]

Get it brotha she gonna be a ripper

[@devinbuchhorn]

That's one of the funniest intros I've seen on Hoonigan...... Garage Garage S.V.U Spectacle Ops

[@isaacshively6705]

All the cool Pit Viper safety glasses Zac has and he wears somes dorky ass safety glasses to wrench

[@HooniganProjectGarage]

You should see what Zac looks like when he reads the owners Manuals. #responsibletruckowner

[@alekmorse7987]

zac your pickup is incredibly impressive. wow hats off to you man

[@chrisstevens3961]

Love the mission impossible spec glasses bro. What a look. 👌👌

[@enigmaPL]

That wiring harness kit looks really awesome with everything you need, labelled wires and good quality. I went to their site to check for a harness for my car but they only seem to do American car wiring kits. :(

[@thehappyplaguedoktor]

You can tell Kado is back, videos are on point.

[@HooniganProjectGarage]

Kado is back Confirmed. We already miss shake cam.

[@timwhiting6854]

Hey Zac, you should change out that steering shaft for the Jeep shaft while you are in there. It will eliminate that rag joint and give you much better steering feel!

[@scottydoesntknow254]

You can build one for cheaper with u-joints and DD steel shaft. I did on my c-1500

[@TxJonathan]

@@scottydoesntknow254 how much cheaper do you need it? I got mine for like $10 from the yard

[@scottydoesntknow254]

@@TxJonathan that's good man. Congrats

[@timwhiting6854]

Yeah, mine was about 15.

[@rlscustoms]

Might as well throw in a Flaming River steering box while you’re there man

[@scottc6012]

Those safety glasses looked bad ass

[@davidv3348]

Incredible content man really enjoying it... keep up the hard work!

[@davidfolkes8849]

Zac's projects always moves so fast we love you Zac (Jamaica)

[@HooniganProjectGarage]

Move Fast, eat... Never-mind! Zac only runs on full throttle. Stoked to get the Chopper Hauler finished!

[@johnespinal19]

This truck it's coming out great 🤯

[@IPlayToBag]

Love the build, love the truck, I think your doing a great job! Keep it up!

[@doogiediggler5274]

The parts availability now is awesome, I helped graft a camaro front frame to an old truck because the parts were not obtainable .

[@LeftTurn72]

That truck is going to be damn near perfect! I would change two things: manual trans, and my name on the title.

[@mr.thebandit.2370]

Honestly I didn’t know that he was going to go this far with it. Great vid Great truck 👍

[@senpaijohnson400]

such a kick ass c10 props brother

[@HooniganProjectGarage]

We expect to see the Chopper Hauler to be one of the best Burnout Trucks in the stable.

[@thatinfideldave]

Watching this makes me wish my dad still had this 1953 Chevy “5 window” he found in a field. Would have been fun to make a project car.

[@lanceuppercut6168]

Go out and get one bro. Never too late too start on a project :D

[@TxRedline]

Your killin me smalls lol get to the new QA1 rear coilover kit lol Its funny your pretty much doing everything I planned on doing to my c10.

[@Matty.Hill_87]

Looking forward to seeing this run, it's going to be awesome

[@KARR]

Hell yeah!

[@cheddarcheese8945]

GETTING IT DONE ,!!!

[@georgef1176]

You NEED quick ratio steering box to complete the set up.

[@SimRacer-HQ]

Wow them brakes 👌this is going to be a amazing wen it’s done 👌👍👍👍🤤🤗

[@trentdawg2832]

Thas gonna be one sexi machine! !!! Good job on stock piling those parts zac, it's gonna pay off shortly here brother #!!!##!

[@fambuild]

Good stuff!

[@rcnewengland8326]

man i love those wheels

[@tombob9206]

When are we gonna see more work on the Kei truck? I can't wait to see that thing slay some tires!

[@abriseno96]

Keep the c10 vids coming.

[@HooniganProjectGarage]

We have another C10 edit dropping next week, let’s see if we can get the ol’ Chopper Hauler cranking over.

[@Custom123boy]

evo9 inna bacc yessir i see it

[@chr1sl4i]

Well damn, Zac the only one that has beauty AND brains at Hoonigan. =P Now where my free swag

[@HooniganProjectGarage]

You must have not met Lab Coat Ron...

[@kylejohnson2184]

Ron stop commenting...

[@thestigsamericancousin4588]

6:20 with the big ol' mustache

[@SpeartechLSX]

Nice build! Let us know if you need any assistance wiring up our harness package that came with the Texas Speed kit! Your C10 is looking good!

[@christophergonzalez3104]

Man that’s such an amazing truck! Now it just needs a turbo

[@HooniganProjectGarage]

Already scumbagging us for more power. That what we like to see!

[@christophergonzalez3104]

Hoonigan Project Cars lmao well that and i mean turbo noises bro😂

[@marsredr100]

Dream Team = Oompa Loompa Big Bois

[@JLHskids]

Best one in hoonigan crew

[@bondonutz1]

You need to plate that chassis Holmes!

[@riz3nfpv306]

Your a killa Zac. Love watching your shit, that’s all I got to say about that see you next time.

[@williamobrien1476]

shoutout to the fast and furious arcade at 7:50 XD

[@johnwyattreece6124]

Don’t you like how everyone has to do their staff inspections in their own garage because Scotto takes up all the room at the doughnut garage

[@davidlackner4604]

Don't only use flexpipes, use as much hard line as possible. Flex lines expand a little if u only use flex lines you don't get the same pressure as with hard lines

[@cartailincautodetailing946]

Can’t wait

[@Ice-Crime]

I miss that brap pit so much..hahaha

[@themaconeau]

Does the circle of fuel move us all? 🤔🤣

[@ES-yk7gt]

Hell yeah man I love c10s so much it should be illigal🤤🤤

[@stephaniescanlon4471]

HEY YOU GUUUUYSSS... got a name for us fans to enter into your contest! The Hoonies!! 😁😁

[@kylejohnson2184]

Yes!

[@MOTA_KRAMPUS]

Great shit Zacc! :D

[@TheDramethis]

Zack = hoonigan version of uncle Reco

[@HooniganProjectGarage]

Zac can in-fact throw a football over the mountain...

[@darrellcoy]

i like Ralph's shirt.

[@andrewgonzalez4757]

Should do another showdown Zac's c-10 vs roadkill muscle truck

[@HooniganProjectGarage]

We’re always down for a solid head to head drag race.

[@michaelmrdf48]

EVO BUILD WHEEEEN

[@_kylejohnson_]

Haha I kinda laughed when he called the strainer ‘the sock’

[@HooniganProjectGarage]

It does slide over the intake of the pump. It’s a sock.

[@howardechols2553]

I would love that truck as a daily and just to have it super clean build let me know when it go up for sell

[@thejacksonmurphy]

0:18 Did you intentionally miss clip your hat? Or did your first button break like mine did from constant wear?