HOPE Tech 3 E4 - Tips, Tricks For Setup. Disc Centralisation - Part 3 - Caliper Alignment Issues CPS

[@zap...]

I'm pretty sure your rear adapter on backwards. Bring it to a bike shop before you kill someone.

[@Chambers36TheEnter]

The arrows follows the direction of the wheel.

[@clarkie005]

Thank for this. It's much needed video to get the lever feel absolutely perfect.

[@Gill_Bates]

Thanks, only just came across your guides and I was having the same issues on my rear Tech 3's. Using this guide I've managed to get the alignment and piston spacing pretty much spot on. The lever feel is very much improved now that the brake pistons are equidistant.

[@Chambers36TheEnter]

Good job for getting them set up, it isn't an easy task.

[@Darchful]

I've had Hayes, Avid, Shimano, and lately Hope. By far the most beautiful, but a pain in the ass to adjust them to the album. I got rid of them a month after buying them new, I went back to my old Avid. Now I want to review them and try to use them again. For now I have bought the o-rings for the caliper and pistons, I will bleed the system, I will see if it is solved in this way, if not, then I put them up for sale and forget about them forever. I add that I have had your problem since my purchase, brand new product. Perhaps, due to the time in storage, the storage weather has affected the joints.

[@Chambers36TheEnter]

I agree they are very tricky to adjust. There is maybe 0.2mm each side of the disc to play with so often the caliper and disc is not perfectly aligned. It takes a lot of adjustment. Bolt that have a shoulder are useful as they will not grip the caliper as you tighten them.

[@METEORA_47]

my piston not comeout equal.then if my piston comeout,when me push one piston in,other one will comeout.how to solve this prob?or need to bleeding again?

[@Chambers36TheEnter]

I had the same problem, push one piston in and the other one popped out. For me there was a blocked hole in the tech 3 lever. kzbin.info/www/bejne/rouTgJiIaraliKc&ab_channel=OddJobMTB. If the pistons is not coming out equal, it's good clean them and then lube them. It could need new seals if that does not work.