Horizon Insider Tech Talk: Spektrum Transmitter Comparison - DX6e vs DX6 vs DX8e vs DX8

Please click "Show More" for links and more information.
Horizon Insider Tech Talk: Spektrum Transmitter Comparison - DX6e vs DX6 vs DX8e vs DX8
In this episode of Horizon Insider, Tom and Kyle try to settle one of the hottest debates in the transmitter market: What's the difference between the DX6e, the DX6, the DX8e, and finally the DX8?
Watch now to find out what transmitter is right for you!
Transmitter Links:
DX6e: www.horizonhob...
DX6: www.horizonhob...
DX8e: www.horizonhob...
DX8: www.horizonhob...
Transmitter Comparison Chart: bit.ly/CompareSPM
Update your current Spektrum Transmitter: bit.ly/UpdateSPM
Follow us on Facebook, Instagram, and Twitter for more content!
/ horizonhobby
/ horizon_hobby
/ horizon_hobby

[@dburton7929]

I own a DX6e and bang for the buck, is a great value. I fly heli’s mostly, and so far, this radio has filled my needs. One point that needs to be mentioned, which applies to all Spektrum Transmitters is that the instruction manuals absolutely SUCK. When it comes to programming, you are pretty much on your own. I have spent many hours of trial and error, ( and several dollars in batteries ) to teach myself what and how things work. Much of the mixing is still a mystery, especially understanding the mix of stabilization. Much work needs to be done to publish a manual that explains all, and I do mean all of the features of these radios and how to use them.

[@eugenecrabs3954]

I won a DX6 at a fun fly at our club, and it is still proudly my go-to radio, and has been for 3 years now! Best radio for all flyers!

[@MichaelHeliGuy]

It seems like the Spektrum guys should know this, but the DX6G2 does not have a diversity antenna. The diversity antenna is only in the DX6G3. That being said, I have had a DX6G2 for several years and it has been fantastic. Having the diversity antenna has never been an issue for me. I fly helicopters outside and drones inside/outside. The voice prompts are great and telemetry is very helpful. The gimbals are very good, but not the best I've ever felt. Keep in mind this is subjective. I also have a Frsky Taranis QX7S. This too is a great radio and at a similar price point. The biggest difference between the two is ease of use. If you buy a Horizon BNF product, the setup for your Spektrum radio comes in the manual and is a breeze to setup. With the Frsky, there is often a little research and trial and error involved. I often need to connect drones to the PC to make minor adjustments. This is primarily due to the fact that the Frsky compatible drones (like the Mobula7 or the Tinyhawk) come from 3rd parties. Setting up my Blade Inductrix FPV BL was quick and easy on the DX6. Once setup, they are both great radios. I do find the gimbals a bit smoother on the QX7S, but that is subjective. I own, fly, and enjoy products on both platforms. I have experimented with a DSMX module for the QX7S. After a bit of research and technical experimentation, I have it working well with a Blade FPV Pro. Getting it to work with multiple DSMX models looks to be more involved so having a DX6 seems like a much better route. The QX7S supports multiple Frsky models just fine (just like the DX6 supports multiple DSMX modules just fine). If you are going to get a Spektrum radio, I would go for the DX6 or DX8 over the "e" models myself. I fly all kinds of things on six channels without any issues. With helicopters I have room for gain or bail-out. With drones I have room for arm or flight mode. With an airplane you have room for flaps and gear. If you wanted more, say split ailerons with flaps and gear, you'll need an 8 channel. With the Horizon Pd Commander (which I've flown) you have flaps and mode all working fine on a six channel. It's also worth noting that Horizon support is excellent. I've had the occasion to use is a number of times over the years and it never disappoints.

[@DrWenChannel]

How would you compare the Spektrum DX6e with Flysky FS-I6X transmitter? Also can you please compare with Spektrum DX6e with NX6? Thanks!

[@guloguloguy]

THANK YOU, VERY MUCH, FOR THIS PRODUCT SELECTION, COMPARISON/CONTRAST VIDEO!!!! THIS IS VERY HELPFUL!!!!!!!!!! I HAVE THE DX6e, BUT, I WILL BE UPGRADING TO SOMETING BETTER, SOMEDAY!... [I PREFER SIMPLE vs COMPLEX STUFF, IN GENERAL I'M NOT A COMPUTER GEEK] => ]MUCH APPRECIATED!!!!!!

[@josesanguinetti9994]

I have a DX6e radio that I started to add the name of my new plane and after I finished I turned it off to see if it would appear when I turned it back on and all it does now is sound an intermittent beep and the words ALERTS Servo 5 position appear on the screen and it does nothing, I can only turn it on and off. What could have happened to it?

[@mthemaniac]

Great video, very informative! I have an old DX6i but plan on buying the DX8 within the next couple weeks. Thanks for posting this!

[@isaiahfurrow7414]

Have u got the DX8? How's it working? I have an original DX6i, pre DSMX , with 2 broken switches, amd 3 repaired trim tabs... Debating waiting for the NX8 this spring...

[@stevendegiorgio3143]

I have have the gen 1 silver DX8.Its over 10 years years old.Currently I'm flying a horizon hobbies V900.I still love that radio.

[@stevecoggins2591]

Love spectrum radios i still have and use a dx7 but fixing to get a dx9. Yall should include one of those spectrum shirts with the purchase of a radio

[@mitchellalbert2107]

Seems there is a difference between radios when it comes to setting up a SAFE aircraft. Would like a video on that. Thanks.

[@brucej7904]

I’ve also heard u need 2 extra channels to use SAFE. Pls comment

[@BillCrone]

I fly heli and fixed wing. I use a two finger style on the transmitter. Do any of the transmitters have height adjustable sticks??

[@kcimages5157]

Is it worth retiring my DX6 i for a DX 6 ? Do the new one have better electronics ?

[@johndcoffman]

So, I have a dx6 g2, which I believe I purchased in 2014 at a local hobby shop. I believe it is one of the first g2 models released. Does it have diversity antennas like the g3? (corrected typo in original post)

[@idxman01]

John Coffman it does not. The DX6 only has diversity on the g3. Ie: model SPM6700 will not have diversity. SPM6750 or 6755 will. This should be on the silver sticker on the back.

[@joddielopez4869]

hi is there a chance to use a DX6 gen2 (black) to old dx6 (silver) for trainer?

[@jasonwoodruff9131]

Can I use my dx8e to operate the pixhawk 2.4.8 and if so what receiver do I need

[@royscott4310]

HOW DID YOU COMBINE THE eleveon (deta) AND ELEVATOR? I have a Spektrum dx8 gen 2 and cannot get that mix

[@stubaldock7010]

Hi, I'm thinking of getting back into model flying again after a very lengthy break due to a life changing accident. My question is this: i understand that the 'e' models have the mechanical switch for mode 1& 2 gimbal switching but i cannot find any info on the other transmitters DX6 and DX8. This is important as i need to switch the modes over but am not dexterous enough to take Tx's apart to swap out innards. Many thanks. Also the kit i'm thinking of is the Carbon cub s+, purely for the reason it supports Safe+ and all that good stuff to help me fly one handed, so my next question is that of channel numbers if i progress on to adding the flaps once confident. Is there a way of utilising one of the DX6(e) other channels ratther than opting for an 8/9 channel Rx?

[@knutneumann7311]

Is it possible to setup your crow braking on the throttle stick and have the motor on a switch with the 6e TX?

[@joshuakeim4809]

Can you do a video on receiver setup using a dx8 gen2 on the 2.0m draco

[@billgregory884]

Hi Guys, I recently purchased a NX6 Transmitter, according to the manual I should be able to bind my existing AR6200 receivers which are DSM2. The problem I have is that the receivers bind fine with both methods, but as soon as I remove the bind plug and I energise the transmitter and receiver, all I get are slow flashing lights on the receiver, which to me shows that there is a problem. Where as if I use my old DX6I the receiver binds faultlessly and I have no problems at all, can you help. I do know that the EU model want bind with DSM2 receivers, I live in New Zealand.

[@realozark2349]

Not a comment, but a tech query. Can I safely power my Dx8e with a 2S 300mAh LiPo battery? I have a handful of these with jst plugs and would like to put them to use.

[@aragorn318]

I have the Gen3 DX6 and I set up voice telemetry as well as alarm for lipo battery level for my Apprentice STS. But it’s very distracting so I tried to turn it off, but it won’t. Is this b/c once telemetry's configured with a plane, it will stay forever with the transmitter? How do I turn off telemetry?

[@turbonetic777]

I just received my DX8e and I set up my plane but I want to change the name, the transmitter has it named Acro. How can I change the name?

[@hunt62703]

Binding question for you. I have a mini apprentice that was an rtf... so it came with a dxe transmitter. I’ve recently purchased a dx6 and linked it to my new umx timber... everything is good there. My question is... can I bind my dx6 to my mini apprentice without it breaking the connection with the original dxe? Just wanting to make sure I will still have control with my original transmitter so I can use it to teach my daughter to fly. Thanks for the feedback! FYI... love my new dx6!!

[@propsandwheelsrc1209]

No, you won't be able to do that because the receiver inside your mini apprentice can only be bound to one transmitter at a time, however, you could set up a buddy box system with the 2 transmitters, so you can take control of the plane at any time.

[@hunt62703]

10-4, thanks for the feedback. I think I’ll leave it alone then and keep flying the apprentice on the original DXe. Thanks for your help!

[@propsandwheelsrc1209]

What I recommend you do is forget the Dxe and bind both the timber and the apprentice to the dx6 as it is much more advanced, and you will enjoy using it a lot more. Your daughter can still learn to fly easily with the buddy box system using the dxe as a slave transmitter, which also enables you to buddy box the timber if you want to. The dxe is solely designed as a budget, simple transmitter, so you should use it only as a backup or slave.

[@hunt62703]

Ok, that makes more sense. Thanks for the follow up feedback!

[@thehobbyguy2672]

Hi guys , i have the dx6 Gen2 only 1 year old , it came with 2.00 software,i have just updated to 2.08 software and apart from all the new smart telemetry functions i now see an aux2 channel on the monitor page,is this usable on AS3X if i have the conventional 6 used up on the flight,flaps and gear ?

[@JJ-jt4ji]

when to compare the nx8 and nx8e? Im thinking about getting one.

[@JHB141]

I have been hunting around for an answer to a question, and I cannot seem to find a current answer. The Immersion RC Vortex 285 used to require a CPPM cable to function with a Spektrum receiver. Since the quad came out, though, there is now the quad receiver with diversity. Does it still need the special cable or does it work without it?

[@billboardman3079]

I have a spmar620 receiver and want to Know if my futaba 148 servos will hook up to this receiver.

[@frankiebrennan]

Hey guys. We have the carbon cub s+. I broke the DXe A & Replaced with DX6e. Having binding issues. Do you have a sequence that we can follow please to bind the aircraft. Thanks !!

[@iceeman32y]

Question. I have a DX9. Have had it for 4 years. It is an outstanding radio. I think the version is 1.01 There are several updates on the spectrum web site. Do I just download the most recent update. Or do I need to download the updates one at a time in the order they came out oldest first ?

[@nealstephensonhiro72]

I have a dx6 gen2 so your case may be different, however I just updated it for the first time since purchase a few years ago. I'm fairly positive there have been intervening patches in the meantime, and mine has updated successfully straight to the most recent without attempt at the older patches. Would suggest following spektrum instructions, create a back up of all your current model memory, then go for the update

[@khaledissa5026]

I upgraded from Dx6i to Dx6e ,i had all the problems with it the push button wouldn’t turn off easily ,sometimes i have to hold the button for quite a while, but now the radio turns on by itself, pulled it appart the shortened the plastic pin incase it’s too long but still the same, the button is not bent still clicks back, decided to remove the battery, now as i connect the battery all the memory is lost , any explanation why the program keeps on deleting?

[@brandonmikel2043]

My dx8e has version 1.23 on it. If I update software will it have forward programming?

[@MrWTF-cs6jr]

Hi, I have a question. So I just got into rc helis, brought 3 used align trex 450 pro dfc as a bundle. I don't want to spend too much on transmitter because I know I will upgrade in the future. Do you recommend the 6e or 8e?

[@robbosrc]

Can you bind all Spektrum recievers to the DX6?

[@jondoe6618]

For someone buying a plane with SAFE and flaps is the 6 enough? Can u just assign the throttle switch to flaps if needed? Looking to upgrade from the dxe to a all in one transmitter. Just simple planes with safe and flaps. I really like the twin otter...

[@horizonhobby]

The only time you will run into issues is when you have flaps AND retracts with a 6-channel plane.

[@jondoe6618]

@@horizonhobby OK Thank You!!

[@daveroche4527]

You guys mentioned a card someone can get to transfer all the airplane settings from a old DX6 to a new DX6 what is the card called and where could I get one?.

[@Mark-Dibble]

Will we be seeing AS3X technology in the new antennaless style of receivers anytime soon? I really like my new receiver, but my AS3X receivers will still be my first choice.

[@bigg_survivor_8876]

Hello I have been having problems with my Dx6e. I have been treating it well but the power button got stuck and can’t turn it on to get the serial number. Has anyone had this problem or can someone help?

[@timmytfpv7316]

do all of these support forward programing ?

[@mikecup212]

I just received my dx8, I purchased it with the receiver included. I’m very new to rc planes and was wondering if Spektrum has a video somewhere to help me to set this radio up, there is another device hooked to the receiver, I believe it’s for telemetry, I have no idea how to use it. The manual just confuses me, a video would be more helpful. Thanks

[@williamhoenstine5057]

In my view, Spektrum does a great job of telling customers the capabilities of their various products but spend very little time developing useful tutorial videos like what you're looking for. KZbin may offer you some help from other Spektrum users. Try doing a search for Spektrum receiver setup. Hope this helps.

[@idxman01]

Search for the model number, I’m sure there are thousands of videos.

[@EXTRA300s]

I Tried a Spektum DX8, brand new version, and after one day "playing" with it, I send it back to the shop, I didn't like the DX8 at all. Back to my Graupner MC-28 HOTT and I'm happy again. Many PNP planes are delivered with a Spektrum receiver, and I thought to buy the DX8 for those planes. Now I sell the receivers and buy a Graupner version, for me personally its much better becourse I love The MC-28

[@kiks7veliz]

Had a DX9 black edition..sold it cause 1 it was just sitting in my garage for about two years and 2 I was in need of cash.. Looking for a tx again and didn’t really ever used 8 nor 9 channels.. My question is should I go with the dx8e or regular dx8?

[@horizonhobby]

The regular DX8 has more functionality and features, some of which you may never use. Check out this comparison chart as it may guide your decision: www.spektrumrc.com/Content/Media/PDF/SPM_Transmitter_Comparison.pdf

[@johndcoffman]

So, I have a dx6 g2,k which I believe I purchased in 2014 at a local hobby shop. I believe it is one of the first g2 models released. Does it have diversity antennas like the g3?

[@kenyattacollins8517]

I recently purchased a DX8e. Is it possible to bind it to a Volantex P-51 Mustang park flyer?

[@nakiahamilton9653]

Bought the DX6e in 2010... Just retired it in an estate sale. OMG I can't wait for my new DX8

[@davidbrown2806]

It would have been interesting to specifically discuss why you would upgrade from a 6ch to and 8ch. Also, I have to agree with Derrill.

[@isaiahfurrow7414]

I'm looking for a new radio, have 6ch, going to get 8... Throttle, aileron, elevator, rudder, flaps, retracts, safe or flight modes, there's 7... the new NX6 seems to address this... But, with biplanes and trying to do nice clean scale aerobatics routines...(I hope to one day do some routines timed to music)... mixing two separate channels for ailerons can be handy, for differential, so it rolls nice and true... Adding bomb drop, or... for warbirds... adding choke, kill switch, smoke, for larger gassers...? I think 8 will be more than enough for quite some time for me, but I think at least 1 of my next 3 planes would have me wanting more than 6ch... My DX6i that I preordered when they were very first anounced, has given me over a decade... hope to get close to that out of the next radio, so I think I might get a new NX8 when spring comes around... but still looking at the DX8 as I'd like to fly soon, amd my DX6I now has 2 broken switches...

[@chromag33]

Very informative video. I have a question about the DX8 GEN 2, will the DX8 GEN2 fit in the stand up Spektrum Transmitter case?

[@kevinvitroable]

Are they coming out with a DX8 G3 version

[@emanuelmencks-meunier7911]

Can you flash a spektrum DX6 with DX8 firmware to make the DX6 have 8 channels? Can you also make the DX6 G3 able to use crossfire or tracer?

[@lewismoore1982]

Have lost my sound of my dx6. Can I get the sound back.

[@vetdoctor88]

How you reset a DX6e transmitter? Can’t find it in manual.

[@paulp2164]

Can you address speaker volume for the voice enabled radios. I had read the IX12 speaker wasn't as loud as a DX9. Being at a field with a lot of noise, it helps to have a louder speaker. I am looking to upgrade from a new 6i to a 9 right now.

[@angelo00ism]

I have the DX8 you can control the volume where you hear the voice loud in the beep lower or vice versa

[@cornbinder1970]

What about forward programming?

[@Stocks_Up]

Do these connect to drones?

[@blkicemike4857]

I have a dx6i,.. what diff about it and dx6e or dx6?? Can i update this on spektrum website u mentioned??? I've had it for some time, i was under the impression i'd be able to use it for many years to come. So i'm curious will it work with ASX3 or is it too old? Thx in adv...

[@sunestorgaard1565]

dx6i has some limitations to the newer dx6 g2/3 & dx6e . Early models was only dsm2, later models came with dsmx and for a period of time you could upgrade to dsmx (no software update possible). Only 10 model memory, no voice, only wired trainer ,AA batteries, no backlight (mods exist) . It does work with asx3, but it is a little tricky. There are no flightmode switch, but instead you can use the flaps as FM-switch, however it is only a 2 position switch but there is a trick that involves the SW switch and mixing to get all 3 flightmodes. dx6i is a good tx, but is on the verge of being obsolete.

[@leonjohnsonjr3331]

Will the dx6e works on the ikon gyro i have a trex 600 Dfc ikon gyro flybarless will this work

[@franzgrueter9323]

If it is such a great product, why is the model discontinued???? DX6 version 1.05

[@horizonhobby]

The DX6 simply received a update. As a result, it has to reenter compliance and it gets assigned a new part number.

[@bretwessendorf2674]

Does dxe8 have forward programing

[@timvanasen6711]

Thank's Horizon & Spectrum I have a DX8e programed to 9 prop planes, 7 edf's & 2 helicopters works great for me don't need voice or any of that other fancy stuff on a gen2 😎👍🛩

[@cesar68033]

What’s the difference between the last dx8 dsmx vs dx8 G2 just the speaking

[@robertemmons2260]

A few years ago, by suggestion, I had upgraded to a DX6 G2. I was informed back then that it's the radio that I can use for years. Imagine my surprise when I had discovered that the DX6 G2 was discontinued! I love Spektrum products, but I don't care for being deceived because of marketing strategies.

[@chandlerallen4196]

Are any of these compatible with DSM receivers?

[@johnbronk6505]

How does the Ds6e connect to computers?

[@brettmccafferty7510]

Ws1000 dongle

[@bobbyray1997]

can I purchase a Dx6e with Mode 1 ? or is it simply sliding over the switch on the back of the transmitter? and also with the Dx6 ? I have to have Mode 1

[@NBrogdon45]

The DX6E is as simple as sliding the switch on the back! The switch is mechanical though, not electrical! So in other words its kind of a tough switch to slide back and forth so to speak. In your case needing only mode 1 this is definitely the way to go in my opinion! I've owned the DX6E and the DX8E, both very good TX's. I've also owned both the DX6 and the DX8 TX's but I've never needed mode 1, that being said I'm not exactly sure how to go from one to the other or if it's even possible.

[@Kymarb2]

I’m thinking about getting a dx6 to go with my blade qx and Inductrix . I’ve never understood what quads are compatible with different transmitters . I hear guys talking about , “ this quad is this protocol and that quad is that protocol “ , but I’ve never seen it spelled out . I’ve got about 10 different quads . It’s a pain to always having to drag around different transmitters . Can someone explain this to me or give me reference material . Also is the dx6 still a solid choice . I’m looking for a transmitter that is easy to put the information into for binding . I’ve got a jj1000 , Alias , x6058 , cheerson cx10 , x7 aircraft , nano qx , blade Inductrix , Symantec x4 , v252 and a hubson x4 . Looking to get into FPV flying in the near future.

[@johnrodriguez2439]

Spektrum: DSMX and DSM2 (unless euro) Frsky: ACCESS, D8, D16, LR12 and a few others Flysky: AFHDS, AFHDS 2A Hitec: A-FHSS Futaba: FASST and a few others

[@skatj23]

I have a dx6 you can only program the sound for your mode switches not timer.... was a big let down can never hear my timer go off cause it's so quiet not loud enough.

[@mmmasterscross7915]

Thanks for sharing this video! Great Information!

[@CallmeDaBreeze1971]

I'm a Futaba FASST guy but I want to get into the BNF stuff. Trying to decide which of these to get. I want the Turbo Timber.

[@mr.wildwood7342]

do any of these transmitters have a heading or compass type info feedback so if i fly to far out and i cant really tell which direction im heading transmitter can give me that info?

[@MsTurbotim]

Dont ever fly far with spectrum. Dont ever fly with spectrum if u want to go far.

[@blue03r6]

the E stands for economy. I just can't figure out why they cost more than the dx6 and dx8.

[@warmcoffee]

Do they all have backlit displays (specially the dx6 and the dx6e)?

[@mathewstenbo6514]

Yes these all have backlit displays.

[@isaiahfurrow7414]

Will NX8 have diversity antennas in it like the DX8?

[@mrpalandeng]

I wanna buy a dx6, can i bind it to these helis: blade 70s, blade nano s2 and the blade 230s v2?

[@horizonhobby]

Yes on the Nano S2 and 230 V2. No on the 70S.

[@mrpalandeng]

@@horizonhobby thnx for the fast reply

[@dmayniak]

What is the spektrum satellite receiver for is that like a repeater why is it there?

[@williamhoenstine5057]

It's a supplemental receiver that greatly improves loss of signal and signal fades. Its a great enhancement. Just mount it away from other electronic components and put the antennas in different phase positions. IE: stand one set of antennas vertically and the receiver antennas horizontally. You'll be pleased with the performance.

[@combatman91]

4:24 "has a knob on it" wich one?

[@PcandTech]

Does the dx7 gen 2 have diversity?

[@gbro8822]

Thank you

[@ianreed4636]

Well that bums me out , I have an old DX7S with a few model on it that I was hoping to transfer over to my new DX8 G2 . I had already flashed the models to an sd card now not going to happen. I have to go through and reprogram all of my aircraft.

[@jeffherndon]

Awesome video guys. These videos are the most informative videos for choosing what product to get. Please continue.

[@billwiththeb]

Could I still have my dx8g2 repaired for free if I send it in..my side rubber is comming off...2 trim buttons have broke.one switch end broke off.i like the TX.ive had it for a few years now..no proof of purchase any more..i do have the box..just don't want to go another year with out a throttle trim.i tried to use my dx7se buttons in it but they also broke..

[@horizonhobby]

Just give our team a call. The worst thing they can say is no! 877-504-0233

[@billwiththeb]

@@horizonhobby yeah man I can't do the 40 bucks n hour.ive never made that in my life no way im gonna pay that to fix my radio.figured it would be free since its not old..but guess im wrong..ill fix it my self..

[@leetjohnson]

@@billwiththeb honestly sounds like you're rough with your stuff? I've never broken a tx knob or button, and even my 4 year old hasn't broken any of his. Do you throw them around or something?

[@billwiththeb]

@@leetjohnson I mean I'm not gonna day I'm not rough on stuff.i don't use that switch anyway.i can fix it my self.

[@robhoard9114]

How do I un brick my Dx6? I have a nice new Dx6 how can I make it usable? Why do Spektrum radios brick all the time? Very annoying.

[@horizonhobby]

Rob, sorry to read this. Please give our Product Support team a call using 877-504-0233 (or send them an email using [e-mail]).

[@markbennett4672]

Spektrum rep really didn’t sell me on any of the transmitters. I mean you had one job... paying a load more from the e model to the DX8 because “it feels good” is not really a good way to sell it. I want to know why it’s priced higher as in what are the Benefits 🤷🏻‍♂️

[@iceeman32y]

Simply stated better electronics inside better gimbals. More programming. And the voice function is a plane saver. I fly sailplanes and often at over 800 ft. So looking down at the radio and loosing line of sight with the aircraft could be bad. Voice alerts on switch positions, time left on timer all without losing line of sight.

[@brianmyers466]

Can you link dx8e to rtf kits?

[@horizonhobby]

Yes, as long as it originally came with DSM2/DSMX protocol.

[@williamhoenstine5057]

Would appreciate an explanation of when/how to use DSMX/DSM2 (US) 22ms compared to 11ms.

[@horizonhobby]

It's fairly simple. Always use the lowes frame rate you can.

[@garyg1848]

Pretty sure 11 ms requires digital servos.

[@williamhoenstine5057]

Horizon Hobbies - What are the advantages/disadvantages?

[@idxman01]

Use 11 for a quicker response. Just know it requires digital servos.

[@williamhoenstine5057]

@@horizonhobby would appreciate you posting videos that show us HOW to setup various capabilities in place of simply stating a product's capabilities - more how to!

[@Bellairvideo]

It was strange you were pushing the DX8 & not the DX9. I wonder if the DX8 , other than the extra channel, it would be less expensive to buy the DX8 vs DX9. I have a DX6

[@leetjohnson]

Most people won't need 9 channels.

[@MrSteeleye]

Such a shame as the instructions do not match what is on the radio. I fly mode one so the mode switch was changed on the back of the radio but the software has to be changed as well. Thereby lies the problem, as what is in the instructions does not corelate with what comes up on the screen when trying to change the software to match. All attempts so far have completely failed. After 5 hours, I have given up and feel I have wasted my money!

[@Jackmiller-xh5ne]

I 💘 spectrum!

[@lubricantrc3244]

Where can I purchase just antennas for receivers. You know antennas the the thing that plugs into the receiver? I believe you call it a satellite.

[@skypilot23]

I got a 6e then found out needed gen2 for forward programming like on 360cfx Truly bummed I asked several reps about features they said voice was the only real sacrifice. Sure is different coming from opentx trying to get used to spektrum feels like everything is spoon fed to a baby lol What is this forward programming? Is that like flashing a flight controller in betaflight?

[@idxman01]

skypilot 23 I’m not sure why you’re bummed, but then later asking what forward programming is. Do you need it? Looks to be a more intuitive option to fine-tune parameters within the FBL unit itself. However, the below link mentions the continued use of d/r on models that don’t support it. www.helifreak.com/showthread.php?t=804125

[@skypilot23]

@@idxman01 thought I blew it not buying gen2 radio but looks like a convenience issue

[@aijazb6395]

JUST TRIED REGISTERING DX 6E WHEN PRESSED SWITCH AND ROLLER TO GETHER RADIO GIVES MESSAGE SYSTEM HARDWARE FAULT PLEASE RETURN IT TO SERVICE CENTER. T CODE2587H . I CODE- 8000000H I AM IN MUMBAI INDIA WHOM SHOULD I CONTACT. OR WHAT SHOULD I DO? PLEASE HELP.

[@matk4731]

I got the DX6E very good radio but shortly realised that I should of gotten the DX9 (future proof) love the DX9 👍🏻👍🏻🙃🙃

[@wackman1573]

Mat K how come because 480 seems a little much

[@matk4731]

Wackman157 Because you will eventually get planes with flaps, retracts, AS3X & SAFE select & 6 channels just will not cut it. The DX9 has more programability is Slightly better quality. It also has a better antenna. It will probably be the last radio you buy so the price is justified

[@wackman1573]

Mat K thank you for replying

[@williamhoenstine5057]

Good video, thanks. Would you be able to clarify why Spektrum 2.4 Ghz DSM2/DSMX Transmitters are not compatible with other brands of 2.4 Ghz receivers?

[@idxman01]

There are 3rd party rx’s such and lemon and orange, but you’re probably asking why you can’t buy a Futaba or frsky rx. You could ask other brands why they don’t directly support spektrum rx’s either. Outside of supporting a competitors product, that seems very problematic. Read the below link. An analogy is that while we use our voice to speak, not everyone speaks the same language. www.rcgroups.com/forums/showthread.php?2301242-The-Beginners-Guide-to-RC-Protocols

[@williamhoenstine5057]

@@idxman01Tnx for the feedback although it really doesn't address the question. Sounds like this reply was submitted by your legal staff!

[@idxman01]

William Hoenstine Maybe rephrase your question. Are you asking why radios aren’t universally compatible with any receiver since they use the same 2.4ghz frequencies? There are some links I came across somewhere on the protocols used such as dsmx, faast, s-fhss and accst. (spektrum, futaba and frsky)... Or you’re just trolling.... I’m also not associated spektrum or horizon hobby if that’s what you’re implying. Just another rc user.

[@williamhoenstine5057]

@@idxman01 I find it unusual that not many other brands of receivers work with Spektrum Transmitters when they're on the same frequency spectrum 2.4Ghz. If you know of others that DO work with Spektrum DSM2/DSMX Transmitters, please let me know their brand names. Trolling, I have no idea what that implies! I'm just looking for some USEFUL information.

[@idxman01]

William Hoenstine I listed two. motionrc.com has one as well, I think oem’ed from Lemon with custom firmware. Sooooooo, that post on hobby king about a rx720x, (aka orange) , wouldn’t be you right?

[@jamesturncliff5960]

The dx6e needs a slider or a knob to adjust things

[@chksix]

The best bang for the buck is the DX8 because of the rechargeable battery.

[@Razor-gx2dq]

Me with a ancient DX7: yes very cool

[@cenabitednbfpv587]

My dx6 ect had brown outs ext once I got my dx8 original my World changed get a mile on just a sat rx all day never had a failsale... On dx8 and sat race autobind tranmitters dx8 og was first to habe diversity and imo this is A MUST

[@nakiahamilton9653]

Just ordered the DX8!! WHEW!!! I can't wait to BNF WTFEVER

[@birdmanbl]

I had a dx6i from 6 years ago ..got out of hobby...dx6e what I just purchased and that manual is like a space shuttle manual...it's NOT beginner or USER friendly ...I am very intimidated by all the switches and software...so much so that I may just forget the hobby again...you need to have simple videos to start up for beginners/intermidiate flyers...

[@daveday5507]

Spektrum have to keep changing things to keep up with Walkera and others. They gloss over the continually changing protocol DSM/DSM2/DSMX/?

[@Brisco_County_Jr]

Dsmx is at least 10 years old. Yeah gotta keep changing things. Sure thing. Continually changing would be like every other year. This is improving over a decade time. Not really crazy. Anyway the x is multiple frequencies and you guessed it dsm2 is only 2 frequencies. While dsm was a single frequency. Hardly glossing over.

[@garyadreon5554]

Can you trade up from a DX6 to a DX 8 ? Need a channel for bomb bay with present DX6 the 5 $ 6 channels are SAFE and Panic. ????