Hornby Dublo Magnetiser update 2020

2020 Update for the Dublo, Triang, Wrenn, etc. motor magnet re-magnetiser.
For more information [e-mail]

[@TheUglow]

I’m so pleased with ours. Bought it for our son and me. It works perfectly.

[@colinsuffolk9161]

Hi Ronald good morning after watching your excellent video on your magnetising tool and after purchasing one yesterday, this will help me out a lot to do all my Hornby dublo locos so thank you very much Colin.

[@kevfrombutterley]

I've had mine since 2017 and it's one of my favourite modelling tools. I can't imagine how many old Hornby Dublo locos are running well again because of you, Ron. Thanks again. Kev.

[@peterbrackenbury]

Thanks Ronald. Even after using the magnetiser for several months I found one or two of you tips quite useful.

[@rodneygooderson4576]

Excellent video Ron. As usual very precise and methodical. Your magnetiser is definitely a value for money investment.

[@RobA500]

Thanks for the update, I have been wondering whether I could do my ringfield motor magnets. This is indeed a very useful gadget and I’m glad I bought one.

[@gordontaylor1483]

Thanks Ron, a very helpful video. I’m enjoying the difference my magnetiser makes.

[@michaelallen2063]

A superb video. Really informative! My loco collection has grown substantially in the last year, so I really should think about purchasing one of these. Once the layout is up and running, I imagine most of the locos will need a thorough remagnetising.

[@robglenn2606]

Hi Ron, received my magnetizer today. well worth the money. Works a treat.

[@davidhardiman8361]

Thanks Mr Dodd. I have had mine in Spain only a few weeks. A great little piece of kit. Already started to pay for itself in the savings of sending locos to the UK to be remagnetised. So simple to use and so effective. I consider it to be a great investment. Thanks. D

[@malcolmhodgson7540]

Hi Ronald, just so happens that I figured out how to re-mag the ring field magnets today by my own experimentation. Your magnetiser did a great job on my original 1971 Evening Star magnet for the ring field tender drive. The original magnet would barely attract the needle on the compass so it took a bit of figuring out. I ended up checking with iron filings (old school style). The Evening Star is back to tip top form. So I have to smile when you tube suggests this video tonight! 8 hours too late! But never mind. Your magnetiser continues to be put to good use and my old motors still run like new. Kindest regards Mal

[@anthonytaylor298]

Just acquired one used from ebay without multimeter. Already revived one of my Triang Bo Bo motors. Happy with the price I paid and it should pay for itself with my ageing fleet. Thanks for making these Ronald.

[@dereksquires6369]

My magnetiser arrived here in Spain today, so perfect timing! Thanks Ron, excellent demonstration of how to use it properly, and thanks for the excellent quick service..

[@killianjayden3949]

Instablaster...

[@djdaz72]

Very informative video Ron I bought one of these earlier this year a great item cannot recommend it enough

[@Raedodd5]

Thank you Kevin for your kind comments.

[@terryallen7313]

I have had mine for a number of years now and still gives reliable service,

[@garryoconnor2654]

My magnetizer arrived in New zealand today. (4 days from the UK! super quick) An excellent piece of kit.

[@jamesgray3057]

great video, as usual very informative,gives me the confidence to service my own locos

[@andyrussell7506]

Great video Ron been using our remagnetiser we bought from you a lot in the club and at shows we attend

[@xenon53827]

PLUS you can pop a screwdriver in instead and magnetise that, useful for holding or picking up screws and other things! Works a treat on my Hornby-Dublo locos too!

[@kennethljungberg642]

Hello Ronald Dodd, thank you very much, useful information.

[@MrTantrums007]

Thanks for the latest video. Very good.

[@barryjgalbraith2635]

Great to see a video from you again.

[@garethparkin9498]

Very interesting Ronald

[@TheShadman47]

Excellent and informative. Thanks. 🚂🚃🚃🚃😀

[@TrainsBoatsPlanes]

Good video, great info.

[@fernsnyder7072]

I bought one of these to remagnetize vintage slot car motors. Works perfectly. Well worth the money!

[@ModelRailwaysUnlimited]

I can attest that these magnetiser are brilliant and have given a new lease of life to my locomotives. Do you have a video up for servicing a Wrenn 2-6-4? I just can't get mine to run well, the motor makes a lot of noise despite adjusting the bearings and changing the balls, when it runs it slows down to a stop or shoots off at high speed. Thanks Mike

[@Bodyline1932]

Lovely bit of physics.

[@tonywincott8448]

I wish I could get y hands on one of these in Australia. I have 4 Hornby Dublo 3 rail trains I would love to get running again.

[@johncass7193]

first class bit of kit; well worth the money. as they say it does what it says on the box.

[@robinforrest7680]

Just came from 00bill's video. I'd seen you using it before but had no idea you actually sold them until now. I think I need one of these ! How much are they ? And can you ship to France?

[@paulrice860]

Hello there Ron. Interesting video. My Hornby ringfield motors only start moving when the power controller is over 50%. Is this because the magnets are no longer strong enough ?. Would your remagnetiser work on these ringfield magnets made in margate in the 80s and early 90s. If so I would love one .many thanks Paul

[@PeterJewell2]

An exemplary video, thank you. Your device will have kept countless locomotives from premature retirement. Very useful part of my servicing kit. Seeing the Ringfield magnetisation, would it actually matter if the magnetic field was out-of-alignment? If the magnet is completely circular (like more modern Lima./Hornby), presumably it doesn't?

[@Raedodd5]

Yes it is most important that you retain the correct magnetic alignment as this reacts with the magnetic coils in the rota that switch according to their position on the contact carbon brushes.

[@PeterJewell2]

@@Raedodd5 - Ahh yes. As I've just seen in a comment somewhere else, the ring magnet field must be perpendicular to the brushes. Would be good to see a demonstration of magnetising a Hornby (or Lima) Ringfield motor magnet, as these are completely circular.

[@forrestrobin2712]

At last I’m going to be able to get hold of one of these! I’m asking for this for my 60th birthday. Do you have a listing on eBay Ronald? I haven’t been able to find it. I’m sure there was one when I looked last year?

[@tec2tec63]

Hi Ron could you explain how to magnetise a ringfield motor Many thanks Michael

[@Raedodd5]

Yes still making them, For more information [e-mail]

[@tiddles4x4]

Would this work on my Triang TT motors? How much is this and where can I order one?

[@farmerdave7965]

OOBill brought me here.

[@evercreechjunction81]

Another great video, but how much for this great product, and how do I go about purchasing one. Happy 😊 Modelling Phil 😀

[@Raedodd5]

Hi Phil, for more info you can contact me at [e-mail]

[@charlie1872]

I live in Toronto, how can I get one of these at a reasonable price or can I build one with simple instructions? Thanks

[@Raedodd5]

For more information [e-mail]

[@TheLoremistress]

How much do you sell them for? What size electromagnets are they?

[@Raedodd5]

For more details you can contact me at [e-mail]

[@georgemartin408]

Hello Ronald. Can’t find where you’re selling these. Do you have an eBay shop, or direct contact please.

[@countmurcielago9802]

Hello Ronald are you still making the magnetiser I was looking on eBay and there aren’t any there

[@PeterJewell2]

It's best if you contact Ronald direct. When he lists them on eBay (as Buy-It-Now) they go extremely quickly!

[@barringtonw2]

Hi Ronald, are you still selling your Magnetiser direct or via an outlet? Thanks Barry.

[@Raedodd5]

Hi Barry, For more details you can contact me at [e-mail]

[@julianshaw3776]

Hi there Ronald, how much are these and the postage within the uk?? Cheers n thanks joolz

[@Raedodd5]

Hi Julian, For further information please contact me at [e-mail]

[@cliffordbicknell6447]

I have been after one of these for a while so could you let me know the price please and where I can purchase it thanks.

[@Raedodd5]

Hi Clifford, For more information please contact me at [e-mail]

[@DaiElsan]

00Bill brought me here as well. I need one.

[@Raedodd5]

HI Dave for more information contact me at [e-mail]

[@DaiElsan]

@@Raedodd5 email sent

[@Raedodd5]

@@DaiElsan Hi Dave, check you sent email to correct address as I did not receive your email, Ron

[@DaiElsan]

@Ronald Dodd checking now.

[@TheBRSteamer]

Just out of curiosity how much is the magnitzer and are u still making them on 2021?

[@Raedodd5]

Hi, For more info you can contact me at [e-mail]

[@TheBRSteamer]

@@Raedodd5 ok I've emailed

[@TheBRSteamer]

@@Raedodd5 I tried email u but it didn't go through

[@petey6415]

Hi Ronald, Could you send me details of how to purchase one of these brilliant machines from yourself. Regards Pete

[@Raedodd5]

Hi Peter, for more info you can contact me at [e-mail]

[@mobahartenholm9289]

Hello Mr.Dodd. is this tool just availabel. Im just lokking around, but no chance to find. Can you help me? Regards Rainer

[@Raedodd5]

Yes still making them, For more information [e-mail]

[@andygoodey9397]

Hello my name is Andrew Goodey and I'm interested in purchasing the magtizer can you please give an idea of the price please thanks

[@Raedodd5]

For more information [e-mail]

[@alfiewenn9440]

How do I go about ordering one of these please

[@Raedodd5]

Hi, you can contact me at [e-mail]

[@peternorris6438]

Are these still available for purchase

[@Raedodd5]

Yes still making them, For more information [e-mail]

[@crystalsheep1434]

15:09 interesting

[@sas-sbs-]

are you still selling them please ?

[@Raedodd5]

Yes, I do have a couple in stock, you can contact me at the above address for further details. Ron

[@rogerhill138]

How do I buy one of these Ron?

[@Raedodd5]

Hi Roger, For more information [e-mail]

[@Rc.pipesmoker]

Are you still selling these please

[@Raedodd5]

Yes still making them, For more information [e-mail]

[@vikingsmb]

do you accept paypal? as might get one

[@Raedodd5]

Yes, please contact me at [e-mail] for more information