HOW TO INSTALL A FULL MANUAL VALVE BODY! Cummins powered ram with a 48RE

How to install a Full Manual Valve Body in your 48re truck.

[@LoganbuiltRaceShop]

Thanks for the feedback! The reason I don’t do a welded nut, and the heart shaped design is so that they are reversible so they can be used with B&M/TCI shifters & PPP shifters. Welding on a nut would mean there would be 2 different designs for the different style shifters and wouldn’t allow any adjustment for cable orientation.

[@horsetorquesdiesel]

Serrated nut would fix the issue too or a nord lock washer

[@493john]

@@horsetorquesdiesel Will it work with a Hurst Quater stick?

[@davidcovan607]

How do I order that same shifter backet

[@Oldskool4321]

The intro about the 7.3 was best!!!🤣🤣 Great video as always Josh👍💪

[@cpfpv6410]

I'm guessing I am a decade older but don't ever stop telling it like you see it. I really love your content and value your opinion. I have a 2005 Ram 3500 single tire quad cab long box 'Clifford the big Red Dodge' (278k miles) with PDD valve springs and pushrods, SXE472 compound kit, air dog, Fleece 10mm stroker CP3, industrial injection 45% over injectors, Fleece coolant bypass, NV5600 with Valair twin disk organic towing clutch... and I will need to rebuild my T-case soon because it's leaking pretty good from the front drive line output shaft seal. Your video on the T-case rebuild is going to save the day!!! Thank you!!!!

[@j.c.316]

Just as I was thinking of this for my truck… wayyy back since your Utah videos… and now you drop a solid video on this 👍🏼 Sweet content man! Do your thing and move at your pace.

[@raychilcote5558]

Nice. Here I am with a mystery switch and using the column shifter. G56 swap someday with continued stock power. Appreciate your work and effort to share.

[@mikestrucks]

Nice install Josh 👍🏻

[@LMDiesel]

Been thinking about putting one in my truck, ever since I drove Chris Pattersons mega cab!

[@baconcreek609]

I like how you have all of your trucks setup similar for parts interchangeability. Great plan for competition and for stocking spare parts.

[@torysukut9692]

Awesome video content as always. Don't worry about people complaining about not seeing every little thing you do. Maybe they should come hold the camera for you. You put out way more useful information then any other Chanel. Greg A is fun to watch but for real information I come to you and you always provide a good time.

[@jameshumbob8247]

Good ol Merr making her spicy. Great video man, keep it up.

[@sidewaysstarion]

0:38 it's the same kind of guy that looks at a 6.0 and goes "Yup, that will be a reliable 600hp daily."

[@horsetorquesdiesel]

6.0 is far more capable than a 7.3

[@witcher71]

@@horsetorquesdiesel Capable. Reliable............

[@horsetorquesdiesel]

@@witcher71 I’m sorry you feel that way 😂

[@witcher71]

@@horsetorquesdiesel I'm gonna grab some popcorn and see how much that engine will test your patience. 😜

[@savagefabrication795]

Towing wise I will never go back to a reg vb. Get stuck once and fall under the charger on a hill and have the safety’s in the vb always grab the next gear too soon and snuff out the charger and you end up stuck in 2nd or third locked when you know you could get it back up into fourth if it would do what you told it too do. Lol. Happened once coming out of Vegas. Never again. I call them half and half’s though and I really like those for daily’s/towing. In third it will run like a auto, but you turn off the gear shift safety’s so it will go to 2,1 anytime and stay till you change gears. Take lock up and od away from the pcm. Absolute dream to drive. But maybe im partial. I have been a fmvb guy since highschool lol. Killer video!!!!

[@dsahlst]

Been waiting on this one! Interested to hear your thoughts on towing with a FMVB. Really not wanting to shell out the coin for a built 68, so I'm strongly considering a 48 FMVB swap for my '16. And, you're only about 3.5 hours from me (NC).

[@4Joe20]

LOVE IT... got my DPC triple disc converter couple days ago was thinking "should i jsut throw it in or do the manual valve body with it." **Video drops** well that decides that lol. thanks for the solid info man. i think my whole drivetrain is built with your videos now lol

[@R07ishere]

I been wanting to do this to my truck for a few years. Great video :)

[@dnaumowicz]

The guy working on them!!

[@baconcreek609]

Nice one handed Bronc ride there at the end. 😂

[@bcbloc02]

Twins are always the best for towing

[@levi5.9]

When you went over the wires for the shifter told me right off you've been doing the wiring for the shop haha

[@curtismcintyre9284]

I would love to see that 472 over the savage fab 351. That's only because my truck will have a very similar setup. But mine has the fleece lift pump and an nv5600. Sorry for being a little greedy lol. Keep up the awesome work fella.

[@Schwifty5.9]

Be sweet to see you use one of Bradley's chargers as a secondary 👌

[@ericsiderius6373]

Wish I had this video when I put mine in. Fantastic content thanks!!!

[@dustyhenry]

Been waiting for this one! Love it man! You have a part number for the shifter?

[@charles15519]

Need a holster mount on the side

[@turbodieselgarage]

Love the WPE buttons. Hate they don't make them any more!

[@joshuaquilliam2887]

Muldoon does i believe

[@turbodieselgarage]

@@joshuaquilliam2887 no just toggle switches

[@Balakay9435]

Hell Yeah Brother 🇺🇸🦅

[@RamTahoe]

Much appreciated the info man🤙 I've already spent enough this year but might go fmvb next year

[@ZeroHorsePower]

Pretty decent Snappy collection, I am a tool fanatic myself.

[@horsetorquesdiesel]

It’s taken awhile but getting there

[@HammerHead524]

Good to see those Epi pens in there! Those save lives

[@horsetorquesdiesel]

I’m allergic to bees unfortunately

[@HammerHead524]

@@horsetorquesdiesel Same here!

[@213spaceforce]

Very helpful im doing a 96 12v 47re fmvb swap into a chevy. 1 I adjusted the cable from park an had it jump into reverse while i was under it an 2 im running the ecm pmc tcm what ever it is for the tach an speedo an had the lock up an od wires to toggles an grounds i was relaying on the computer for the 12v for pin 1 but... with the gov pressure sensor unplugged that didnt work ran it to fused keyed power an got my od an lock up to work 3 im running pretty much the same line pressure setup but was running off a different port...ftw thanks for the info

[@romeovilleda2504]

Thank you for the great information great job keep it going

[@woos31]

Stealth 64 or whichever one Calibrated Power is manufacturing and redesigned to replace to factory 4th gen air spinny squishy device, then you get an exhaust brake for towing as well

[@DubsDiesels]

Doing a 7.3 reseal while I listen to this. 😂😂😂😂😂 Caught me off guard.

[@baconcreek609]

I shift both of my 47s manually when I'm towing. They aren't obnoxious. I guess it comes from driving truck for several years.

[@ROELKEY2442]

Looks fun!!

[@eriktheissen5879]

Those are some real fighin' words on the old 7.3..... You're not wrong, but I'll still drive them

[@rtz549]

Burn out was smooth. 👍

[@Kodi5204]

I mean you definitely have some points about the 7.3 but I feel like it depends on what kind of person you’re if you want reliability I feel like the 7.3 tops all I mean it’s proven itself now if you want something fast and quick witch you can do to a 7.3 to some point but that point is definitely lower than other trucks also before I got a 7.3 I knew nothing about diesel’s and it taught me so much so I definitely feel it’s a easy truck to work on

[@ronsawyers5114]

Question; why do you need a lock out on going to third? Thanks, great video

[@horsetorquesdiesel]

Cause after 3rd the shifter clicks neutral

[@karlwahlfield6462]

you ever use braided wire loom? dorman makes really nice stuff that's much easier on the fingers lol super clean look too. keep up the great work!

[@treya2403]

Gah I would love to have that , I had the exact! Truck !! And when family members passed I had to sell my 06 Mega Cab 4x4 6Spd and it had the dark blue paint job can’t remember rn what Mopar called it but it was beautiful! I miss it I hope one day I can afford another because now I have a family and the mega cab! Would be Fn great lol there’s my 06 story some will understand 😅

[@tommygreist9560]

I'm with you on those power strokes....who wants to snatch the cab off on something so simple when you can have a Cummins and get to any regular maintenance item in minutes.

[@73cjproject]

Great content as always. Definitely have a lot of control with the FMVB. Very interested to see how the towing duties go with it. I've already got an nv5600 truck as a tow piggy, so I already enjoy shifting. My biggest thing I want is an exhaust brake to go with it and compounds. I'm guessing a modded 351 with a s475 or s480 would be a good setup on that for towing. Have you ever run any of the DPS turbonator set ups? That would be an interesting set up to see in there for the exhaust brake/vgt functionality they offer.

[@rtz549]

Put that giant 133mm turbo on it. Full boost too.

[@VictorDeleon-ul2yl]

So does this have the same advantages as a manual transmission??

[@dangarcia4152]

Great video. Where do I get the buttons for the shifter? Links for the products please. Thanks man

[@horsetorquesdiesel]

No longer in production unfortunately. But Firepunk makes a nice shifter with switches

[@georgepierce9253]

Nice ride

[@jaythacker5160]

When ya get your metal fab materials from Lowes you know your ghetto'ing it. LOL. JK, great video on linkage adustment. I've fought that one before when I didn't know better.

[@the_rocky_mountain_rider]

Other than cool feature, is there a purpose for converting to this? Just curious, never seen anything like this before. Also any drawbacks to installing one of these? Thanks!

[@MrSpccdavid]

Does anyone make a 3 button insert so you could add an exhaust brake?

[@kjax76]

The button side plate is pretty sweet. Can I get that through you?

[@justinadickes4770]

Thats so awesome on how simple that setup is, and is the dash indicator only in the tune or also in the VB

[@horsetorquesdiesel]

It’s in the tune

[@adrianmilissa9271]

Awesome video!!!! Let us know how you like it especially for those of us at the low HP 😒 level. I really want to install one of these. I have always wanted a “manual” truck and see this as the next best thing 😂. Is PDD good place to get a MVB from? Do you guys offer them? I have PDD 650hp trans. Still be ok to run a MVB? Thanks Adrian

[@horsetorquesdiesel]

You’ll have to swap a couple springs too but it can be done

[@adrianmilissa9271]

@@horsetorquesdiesel what do you mean a couple of springs? Elaborate kind sir. Adrian

[@danielvolk4200]

Where is a good place to find the pieces needed to make that gauge setup?

[@horsetorquesdiesel]

Amazon

[@daviderickson6933]

Honestly I’m one of those who would gladly take a 7.3

[@Hellhounded-cw3iu]

Just curious, what happens if you forget to unlock over drive and shift down to second? Is the valving setup in a way to prevent that from happening or is it something you just have to pay attention to and not forget?

[@horsetorquesdiesel]

It will kill the truck

[@noahbettenhausen7622]

Just out of curiosity how do I retain the range selector like you did during a FMVB swap? I would like my dash to work like yours.

[@horsetorquesdiesel]

Find a tuner that has CAC in that function

[@daniel5_935]

Hey man, I know this is an older video so I hope this reaches you. I noticed you don't have a TTVA? is it not required when you have a FMVB?

[@horsetorquesdiesel]

I do have it: figured out how to make it work on a FMVB

[@tylermartin2631]

That’s cool man

[@markrich3271]

Hey Josh where do the 3rd gen 6.7 67mm turbines come from on the vgt turbos? Is it what's stock from the 4th gen turbine and exhaust housing?

[@tessastump]

😂😂 hey according to google the 7.3 is the holy grail

[@adrianmilissa9271]

Hey Josh do you use the original rooster comb on a manual Vb I know you have to use a 48re on a 47re? Also do you keep the ttca hooked up?

[@keanekriebel7420]

Not sure if I’m a fan of that ratchet shifter. Would rather have muldoons with the switches for lockup and overdrive. Much cleaner I think

[@horsetorquesdiesel]

To each their own, I have XXXL hands so Muldoons shifter is too small on the switches

[@michaelplemons3688]

Wish my 47re shifted that smooth, it bangs going into each gear unless I’m at the perfect low rpm range say 1800 rpm and locking the converter from 1-2 2-3 is rough as all get out😒

[@horsetorquesdiesel]

Mess with the TV adjustment?

[@michaelplemons3688]

@@horsetorquesdiesel tv cable was removed sense it said it was a constant flow converter 150 psi unlocked and 190 psi locked. In drive not moving I have 130 psi. I haven’t adjusted or messed with the valve body parts yet

[@michaelplemons3688]

@@horsetorquesdiesel the valve body I went with was muldoons. I contacted them and tried to get ahold of John with no luck at this moment. I’m not sure if it’s acting this way because I don’t have the spacer in the low/reverse piston or if it’s normal like it is but from watching you shift that one it’s got me concerned and I don’t wanna blow this trans up over something small

[@denverbuerge]

Whats the part number on the ol b&m shifter if you dont mind sir?

[@Mugs.00]

Do you have to do any additions internally on these transmission to run this set up? Or can it be thrown on a auto 48re with what your video shows.

[@horsetorquesdiesel]

Have to change the servo springs and I always upgrade guys to the billet L/R servo on a FMVB

[@Mugs.00]

Thank you for the information

[@MidFNlife_Crisis]

Been a while since you had a triple turbo setup

[@horsetorquesdiesel]

Idk if I’ll do that again. It’s such a pain to work in

[@MidFNlife_Crisis]

@@horsetorquesdiesel I have a 2004.5 I don’t use for work anymore that I’m trying to decide what to do with. It’s a 2 door dually with a NV5600.

[@adrianmilissa9271]

Does anyone offer a complete kit minus the valve body or even with? I have been looking at shifters 🤯. Which shifter is needed to many options. Adrian

[@too-stoked-about-2-strokes]

7.3 doesn't need billet heater/ac flaps tho. Last time I checked, Cummins guys swapping in a 4r100 transmission is an actual thing that happens. But serious, is the actual cost of getting a 12v to 600hp vs a 7.3 to 600hp all that different, all things considered?

[@joshuaquilliam2887]

🤣😂🤣

[@RobSimmons6.7]

I can't seem to find a -4an to 1/4in fitting and the part numbers in the video don't seem to bring anything up. I think I've found everything else in the video, just can't find that one fitting

[@horsetorquesdiesel]

Amazon sir

[@1ken.cheniergmail]

Great video ..Would that work with the 03 f350 automatic ? I know you guys have a 6.0l as well but our trans would be the same would they not ? The 510 re

[@horsetorquesdiesel]

No you could not do a FMVB

[@jordanhurt7507]

Do you happen to have a part number on that shifter I’m wanting the one like that without switches because I’m wanting to run the tier one buttons

[@denverbuerge]

Can't run the b&m shifter with tier one handle/buttons. Tier one is for ppp shifter

[@jerryhaveman5659]

Ok, I have to know, how is it tuned to be able to show up on the dash and reverse lights. Currently having to run my truck with a manual tune, so I no gear selector on dash.

[@horsetorquesdiesel]

Gotta have that added in Calterm

[@joshcarter6974]

When you sled pull with your fmvb do you leave in third or leave in second lock then grab third?

[@horsetorquesdiesel]

I leave in first

[@mattm9621]

Im ignorant of this shifter, but what is the point of this why not just get a 6 speed? Is this just so you can shift in a automatic? I'm confused could someone please clarify for me please and thank you.

[@horsetorquesdiesel]

It’s a manual way to control an automatic 48re when built handle a lot more power than a manual

[@mattm9621]

Cool thanks, so one more question is there a big difference than using the column shifter on a auto?

[@horsetorquesdiesel]

@@mattm9621 yes it gives you full control the column doesn’t

[@mattm9621]

@@horsetorquesdiesel awesome 👌 thanks again for the info.

[@dylanmorin2534]

Do you run a aftermarket trans temp gauge with this setup? Or throw the pin from harness into that plug?

[@horsetorquesdiesel]

Yes in the pan

[@dylanmorin2534]

@@horsetorquesdiesel thanks for the feedback. Here I am again lol. do you have any idea what they do tuning side of things to get it out of derate? I’ve went thru a few tune revisions now without fix. Do I need to run a manual tune file? 05 truck auto shift transfercase

[@joeamos3245]

6.0 non-VGT turbo

[@wideopen4186]

Is this a forward fmvb or a reverse??

[@horsetorquesdiesel]

Forward

[@turbodieselgarage]

Have you tested or ever ran the pdd line pressure gauge? I just ordered one but noticed you went with a "mechanical" gauge

[@horsetorquesdiesel]

There’s a reason I don’t use it. But legally can’t say why

[@turbodieselgarage]

@@horsetorquesdiesel fair enough

[@bradymatheson9518]

I know how a myer valve body is, they can be spicy, or not wanna shift into 2nd or 1st😂

[@berryboo3496]

So did you have to do anything to the valve body?

[@horsetorquesdiesel]

Yes you have to install a FMVB kit into the VB itself

[@davidcovan607]

Where's your TV cable and spring did you not reinstall it

[@horsetorquesdiesel]

It’s a TTVA

[@davidcovan607]

@Horsetorques Diesel yes but do you not have to reinstall it I'm almost done doing mine and don't wanna reinstall that cable if I don't need to.

[@mitchvankesteren6771]

I have a feeling it has nothing to do with my VB but when I replaced mine, Ive had a bitch of a time getting mine to read park without having my alarm go off when I leave my door open… pisses me off when I go to hook up my trailers

[@curtisd8206]

Adjust your shift linkage

[@rotarypumpdiesel131]

How different is this procedure for a 47?

[@horsetorquesdiesel]

If a 47re it’s identical

[@mattheweberly1047]

Waz that part # for the wiring thingamahjig please?

[@horsetorquesdiesel]

www.ebay.com/itm/325891398110?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hRNy2P5yS3W&sssrc=4429486&ssuid=25L61aqMQRS&var=&widget_ver=artemis&media=COPY

[@mattheweberly1047]

Thank you!

[@mattheweberly1047]

I hadn't seen that you responded, I got my stage 1 fmvb installed and while I sort things out,.. I don't have cruise working. (My 04.5 has the apps next to the engine) advise for me on this? Thanks bro.

[@horsetorquesdiesel]

@@mattheweberly1047 cruise should work may want to check basic in lines

[@horsetorquesdiesel]

@@mattheweberly1047 vacuum

[@thomasz5134]

Where did you get that shifter from?

[@horsetorquesdiesel]

Summit

[@mariorivas6367]

do you have a part # for the switches

[@user-oh4ls3md1z]

Hey bud, how can I dm you? Cheers

[@lyndonhamby7432]

Power stroke. Not me 😂😂😂😂

[@tristenoberlender9685]

What is ttva

[@YotieKiller1]

Transmission throttle valve actuator...TTVA

[@jamesmarlar696]

There is never a last oil leak

[@ambercamber9718]

Got enough epi pens? 😂

[@TheProchargedmopar]

👍💪

[@HighlyModified]

I'm kinda lost.. am I missing something really big here? All you did was move your shifter linkage and the bottons from factory? The truck was full manual before you did that? is this is what a manual swap looks like? Because you didn't even change anything. You relocated factory controls? And the you even said the factory cable works better then the one you installed? Wtf are you guys smoking?

[@horsetorquesdiesel]

I’ll try to explain. I ran a new harness for LU and OD The shifter comes with a new cable which I installed. Instead of removing all the factory stuff I left it in case I want to switch back. The factory controls do not allow for LU or OD control when you want only when the ecm commands it. I don’t understand how you are not getting it

[@HighlyModified]

@@horsetorquesdiesel ya, that makes sense I was just unsure how you shifting it vs the computer was any different. Why not just program the computer to shift right now instead of tomorrow.

[@ppvfd121]

Dude I wanna pull my g56 and put in a 48 w/ fmvb so bad. So sick of that slow clunky ass manual.

[@raychilcote5558]

We may have to find each other. I wanna swap my 48re for a G56.

[@horsetorquesdiesel]

Missed connections 😂

[@jamesmarlar696]

Dude sell me one of your banners on wall

[@jamesmarlar696]

Good video quality was fine and if anyone doesn’t feel that needed information was not included shouldn’t be doing this anyway

[@SCOTT218X]

That intro was right on (power jokes are junk and duracracks are even worse

[@joshuaquilliam2887]

Jeez man a bit insensitive, you can't talk that way these days. I wouldn't mind a 6.4 truck to swap a Cummins into. Or if I had a lift I wouldn't mind a 6.0 if it was free.