Hose Clamp Struggles Are Real 

[@tomthackston1442]

Also align the clamp back to the impression on the hose.

[@yzfffooo]

Fuck yeah. This is a very helpful trick. I always squeeze and release until it pops back.

[@nsxt290]

I'm embarrassed bc i did those things as it didn't release until it just released. Thank you for the screwdriver tip

[@HowtoAutomotive]

Thank you for watching!

[@itmakesyouthink]

I love great industrial design.

[@calebmccumber6084]

I discovered this while the clamp was in my hand. Not on a hose to restrict it's rebound. That spring tension busted my fingertip wide open lol. I had just started liking those clamps too.

[@HowtoAutomotive]

Ouch I bet that hurt

[@titan9m]

Thank you, had this same problem yesterday. This helped a lot.

[@tomthompson7400]

keep your fingers out of the way , as the big ones bite.

[@HowtoAutomotive]

Ask me how I know 🤓

[@michaelvinson-uz2ze]

thank you. gotta learn somehow.. ty for the tip

[@BenVallack]

None of the ones I’ve seen have a way to lock them open!

[@Joe..3.8.0.9_]

Thanks

[@TheoatStudio]

this is amazing tip than trying to return the lock with squeezing. Thanks.

[@jimpie231]

Thank-you!

[@bigrockinu]

Thanks🎉

[@clariteatv88]

This was so helpful. Thanks for posting. I was so frustrated I had to come look it up and found this, think I'll give it another go in the morning🥰🫡

[@magnum_dingus]

Hose clamp pliers aren't that expensive.

[@51-FS]

But they don't help with releasing the clamp....

[@lowridingtrucks88]

Where do you buy replacements

[@51-FS]

Twist the screw driver.... twist

[@bendepeel7846]

Cut off junk factory clamp put real hose clamp on

[@rupe53]

the worm drive clamps will damage plastic radiator fittings, which is why they use these to maintain constant tension.

[@bendepeel7846]

I've never had a problem with them so I don't really give a s***

[@davycrockett4395]

I've never had a problem with them either just don't over tighten

[@daveyt4802]

Worm drive old skools damage the hose, hence this new style.

[@rupe53]

the worm drive clamps will damage plastic radiator fittings, which is why they use these to maintain constant tension.

[@davycrockett4395]

These clamps dig into the hose until they leak. My experience is these are the worst clamps I've ever used

[@lorenmadrid4598]

Pro tip... use the proper damn tools in the first place or don't do the job!

[@brarautorepairs]

No, you don't need a special tool for everything. This is not a profitable way to run a business. You buy what you need and as you get more work, you slowly add more tools to help save you time.

[@romeothompson9389]

So admit that you have no common sense and ingenuity skills ? Not worth much if you can’t figure out stuff if the tools/situations are not 100% ideal

[@51-FS]

Whats the tool? I been looking for the right way to do this.

[@51-FS]

​@romeothompson9389 commonsense ain't verry common any more

[@flaman2011]

Spring clamps and that's obviously an American vehicle clamp. Imports really don't have that

[@Khanbrand455]

Lahore my jis ko clamp chahe hoo wo rapta Kary hose clamp ss. All size.

[@andybenfield79]

67 years old and a ex mechanic. I never knew this. 😂😂