how do i know when the Ozonator goes bad, my 20amp throws soon as i turn it on, by the way mine is a Hot spring sovereign model 2
@garrettpaul56262 жыл бұрын
Thanks for the info you just saved me alot of hassle and cash for a stupid little check valve
@adamwaterman2900Ай бұрын
My tub was not heating up. So we turned it off to conserve energy. While it was off, the tub starting leaking and the breaker kept tripping. I found water leaking out of the ozonator. That I think I can correct easily with a new check valve. My question is, could the check valve issue also be responsible for the tub not heating up? Or is it two separate issues?
@danbeuckelaers40383 жыл бұрын
So if the check valve is good, how do you check the proper functionality of the ozonator then. I have got a Calspa with Ultrazone by balboa. There is a power LED on the ozonator which is green when on, so that is good, but how can you check that ozon is going in the SPA ????
@djhoss3 жыл бұрын
How can you check the power that's supposed to be feeding an ozone generator on a Jacuzzi hot tub
@chrishiggins6666 Жыл бұрын
Have a question my ozone unit quit working as the check valve has failed and it was tripping the breaker. I have a new one on the way. Which direction should the check valve arrow be pointing up or down?
@SpaGuy Жыл бұрын
Watch the video that is the purpose of it to tell you how to figure that out..
@chrishiggins6666 Жыл бұрын
I just replaced my ozone unit and made sure that the check valve is in the correct way and for some reason when I put my main pump on low, bubbles won't come out but when I put it into high speed the bubbles start to flow. What could be wrong? any help or advice would be a big help!
@SpaGuy Жыл бұрын
Some check valves or jets require more volume to create suction and bubbles.. Make sure the jet is clear with no obstructions.. Some pumps will not take enough pressure on low... Is your pump 115V?
@chrishiggins6666 Жыл бұрын
@@SpaGuy I believe the pump is 220 the spa is hooked up to 220, if that makes sense. Could it be that the pump is getting weak with age? The spa is just over three years old. It gets used a lot.
@nailsofinterest4 жыл бұрын
Thanks for the awesome video!! Could you help us out further. We believe as we had ozone during checking..the tubes just seem to be very old n deteriorating on.us...looked like some had melted rubber inside... can they be replaced? How difficult is it? It's a hot springs spa. Over 10 years old. Part near ozone control and check valve both tubes looked this way. Thanks in advance!!💜💖💜
@Sykodre3 жыл бұрын
Great video! If the Ozonator has water leaking should it be replaced also?
@SpaGuy3 жыл бұрын
Once the check valve is replaced get the water out of the ozonator and it will usually work again..
@black52543 жыл бұрын
Can I leave the ozone plug off the board and the jacuzzi on? I’m waiting on the part to arrive, and we are supposed to get freezing temp in a couple days.
@SpaGuy3 жыл бұрын
Yes an Ozonator is not needed for any hot tub it is an add on..
@black52543 жыл бұрын
@@SpaGuy thank you spa guy!! That’s why I love your videos
@zjelkof4 жыл бұрын
There is blue and green parts, mine is blue - does it make a difference? I need a blue one. It fractured at the end and was leaking water inside the service compartment.
Would the ozonator cause my hot tub to stop heating? Cause the ozonator use to glow green and is dark now.
@SpaGuy3 жыл бұрын
An ozonator has nothing to do with heat..
@AnthonyDibiaseIdeas4 жыл бұрын
Great information. Thank you so much.
@glen39934 жыл бұрын
would a bad Ozonator keep the breaker from staying on, and does it really need an Ozonator
@SpaGuy4 жыл бұрын
Unplug it and if the breaker stays on that was the cause..
@Altateamllc2 жыл бұрын
Hi Spa Guy, I came across your video while searching why my breaker is randomly tripping. I did have my water level too high. It was tripping like 2-3 times a week. I barely reduced the water level to a normal level - 1 day ago. So far, no tripping. I had an electrian check the breaker and he said it was ok. This hot tub is at a cabin in the mountains and getting a service person up here is very expensive ordeal. My ozone generator is hotspot watkins freshwater III. It does not look the the one in your video here. Does it expire? I will check my checkvalue like you showed - maybe that is an issue or maybe my water level was it. I don't know. just seeking any advice you might have. thanks in advance!!
@traumajock4 жыл бұрын
does the ozonator have a fuse inside the spa panel?
@SpaGuy4 жыл бұрын
Not usually..
@traumajock4 жыл бұрын
Ok. I bought a used Morgan Malibu a couple of years ago. I watched some of your videos and my nephew and I wired it up. We removed the ozonator and I just recently bought a new bulb for it. I installed it yesterday and plugged the J&J plug into the end of the control panel. I didn't open it up. The Ultrapure generator has a fiber optic cable thats glued into it. The other end had come loose from the little window near the controls. We hotglued that back in a while back. It might've popped out again because I'm not seeing light from it. I'm at work for two days, so I'm going to order a new check valve and install it when I get home.
@2Ryled4 жыл бұрын
I dont even know where my ozonator is on my hot tub, or weather it's working or not. I suspect not
@deadair8014 жыл бұрын
I'm sorry that's low hanging fruit and I'm 12 years old in my head when I suck on it it does this but seriously your instruction is a lifesaver
@robertgray65125 жыл бұрын
What size check valve is it?
@SpaGuy5 жыл бұрын
Most are a double size 1/4" graduated to 3/8".. hottubpartsofamerica.com/search.php?search_query=check+valve
@johnsullivan9353 Жыл бұрын
Can I disconnect my ozone generator for one night without any damage?
@johnsullivan9353 Жыл бұрын
Until I get new check valve ?
@SpaGuy Жыл бұрын
You don't have to have an ozonator.. Just unplug the electrical connection and plug the tube to stop the leak.. Spa Guy hottubpartsofamerica.com/ozone-check-valve-prozone-1-4barb-x-1-4barb-viton/
@G8Gato4 жыл бұрын
This one is gold thanks you sr!!!
@504Dboi067 жыл бұрын
Psol and psoh bought new control panel and circuit board.
@SpaGuy7 жыл бұрын
What kind of system and what brand tub?
@504Dboi067 жыл бұрын
Spa Guy calspa tub. I'm not sure the system my father in law had it replaced and with new system it has the same error code I beleive
@504Dboi067 жыл бұрын
Spa Guy I don't know anything about the tubs but I'm pretty tech savvy.
@thomasbrinksr65516 жыл бұрын
Hey spa guy billy you are very good at investigating check out this guy ull be interested I’m sure his name is ademir miron I found it on face book