HOT TUB Pump Volts On a Balboa Circuit Board / HOT TUB Pump Volts

[@VIPPoolsandSpas]

If you have any questions, please comment below or join our membership group for all the perks.

[@vanjitsu132]

Why stay away from the ground, what happens??

[@VIPPoolsandSpas]

@@vanjitsu132 if your on the wrong meter setting, you will find out. Lol. I just tell people to stay away from that because I'm not there and can't see if that meter is on the right setting.

[@ruffedhunt4267]

Any idea why the high speed wire receptor on the board would literally burn through the board? Happened once, I replaced the spa pack, a year later same thing again. Never tripped the breaker or blew a fuse. Low speed still works. Balboa VS501.

[@VIPPoolsandSpas]

@@ruffedhunt4267 I have an idea. Need to see a picture of where it burnt, the circuit board, the volts of the pump and the Switch bank. If you can, send to [e-mail]

[@1upperformancegear439]

Thank you this was helpful, I will also be taking the board out tomorrow to check the back for anything burned up.

[@VIPPoolsandSpas]

might be a relay. Check all fuses also anyway. not just the one I said to test.

[@1upperformancegear439]

@@VIPPoolsandSpas ok I’ll reply here tomorrow with an update, thanks for the help

[@VIPPoolsandSpas]

Did you get your hot tub fixed and was it the board?

[@1upperformancegear439]

@@VIPPoolsandSpas thanks for checking in. I am currently waiting for a new board to be delivered I will be happy to give you an update when I get it installed. Fingers crossed 🤞

[@VIPPoolsandSpas]

@@1upperformancegear439 Thanks.

[@Leo-gt1bx]

Hi the pump in question was giving HTR errors is is Hi I have the pf-20-2n22x pump one of the capacitors has a huge hole burnt into it. Is this normal? I can't find out what it's rating is. The other capacitor is a 45uf and seems fine any advice please?

[@cmf71]

Where can I find a replacement main power cord? Mine was cut

[@VIPPoolsandSpas]

Don't understand the question. "Main power Cord"

[@cmf71]

@@VIPPoolsandSpas the cord from the hot tub that plugs into the house

[@VIPPoolsandSpas]

@@cmf71 110V plug and play? If so, what country are you in and ill give you a link where to get one.

[@cmf71]

@@VIPPoolsandSpas yes sir, I'm in the usa

[@VIPPoolsandSpas]

@@cmf71 Put these together and you have your power cord. amzn.to/3Pcblxp amzn.to/43IuTgu

[@chuckknapp7720]

I got 120v from testing the black/neutral and 120v from red/neutral, but 0 from black/red. What now?

[@VIPPoolsandSpas]

Breaker is put in wrong

[@chuckknapp7720]

@@VIPPoolsandSpas but I am still getting 240v across the two lines from the power coming in and the heater element. Mine is interesting case. It’s a Balboa GS100 from Europe and I brought it to the US from Spain. I think I need a new motor also since it’s EU Spec.

[@gaspmalik]

I have a Balboa BP7 spa control system with TP500 control. It is designed for a 2 speed pump at 240v. My pump is 120v. Do you know which jumpers I need to move to operate at 120v 2speed pump. Thanks

[@VIPPoolsandSpas]

is it pump 1 or pump 2 ? Pump 1 is on the ciruit board and 2 is on the expander board.

[@VIPPoolsandSpas]

let me know if ALL the WHITE wires are in group 2 (left side)

[@VIPPoolsandSpas]

If pump 1 is 120V, is it plugged into J9 ? If it is, MOVE J72 to (group 4). Any spot, J45, J54, J77, J78, J70

[@gaspmalik]

Pump 1 or J9. Currently J46 connected to J72. I am moving J72 to group 4 (J45).

[@gaspmalik]

All the white wires are going to Group 2

[@blackshepherdschio]

Can I replace the old 120v pump to a 220v? Btw the spa was converted from 115v to 220v

[@VIPPoolsandSpas]

What spa pack do you have? Also, check behind the door of the spa pack to see if there's a chart for everything

[@blackshepherdschio]

@@VIPPoolsandSpas LPI300AV PN 56694

[@VIPPoolsandSpas]

@@blackshepherdschio I think thats a balboa. Behind the door, it should have a diagram showing if pump 1 can be changed. Some can and some can not.

[@blackshepherdschio]

@@VIPPoolsandSpas I got it replaced and it’s working great. However, my panel jet is not working the jet only works on the light switch. 🤦🏻‍♂️ Any advice what could be the problem?

[@blackshepherdschio]

@@VIPPoolsandSpas also if you could advise what type of jets cover fits on the plug and play balboa. I really appreciate all your help!!!!