this video really did help me out becaue i was having issues with my pressure sensor and after 3 hours i am good to go! thanks Johnny
@NChampionzChannel8 жыл бұрын
Amazing! I am so lucky to see this video because i recently was about to buy a new one, but i knew there was an answer to the problem! :D AMAZING VIDEO! THANK YOU! YOU SAVED ME FROM SPENDING ANOTHER $500
@krishagarwal18445 жыл бұрын
Hey I am facing a problem right now.....what happens is that when the 'nipple' thingy is pressed the socket in which it gets attached is kind of coming out of the gyroscope what should I do??? Should I glue that?
@UptownFights5 ай бұрын
Hi, my hoverboard rides normally, then pow! I hit a bump and i get thrown to the streets. Lol The power just shuts off. No LEDs on at all, not Bluetooth, no power. Until plug it in again. What you think?
@FredddH2 жыл бұрын
what is the type of connector to use on the hoverboard cables please? I would like to repair a broken cable without having to buy a card to have the cable. Thanks a lot
@happydaze334 жыл бұрын
Would this help when riding along and the board just stops?
@larsonmcswain38608 жыл бұрын
After less than10 hrs use ours needs this . Now to try to get ahold of Sawgway Monday morning!
@loona31735 жыл бұрын
We bout one 7 months ago just stopped working two months ago. One side keeps stopping the wheel will spin but then it stops red light comes on could this be what's wrong that side possibly?
@garffin28254 жыл бұрын
Brooklyn same
@loona31734 жыл бұрын
@@garffin2825 had to purchase a new one no one knew how to fix it an the part was 60 bucks when I only paid 100 for the hoverboard just went an spent 100 on. a brand new one with a 2yr warranty. We got swagtron brand this time we have a hoover1
@ricardodeleon71697 жыл бұрын
how does the gyro sensor break or get defective? does it have something to do with weight?
@jakiyahsavage8699 жыл бұрын
nice
@stevehood20668 жыл бұрын
Hey Johnny, I have board that runs for a few minutes then completely shuts down. Lights are off and no power. And the only way turn it on is to plug the charger back in. What am I looking for as a fault?
@johnnyamicci31958 жыл бұрын
+Steve Hood either bad battery or motherboard. do you have any friends with boards? try putting their battery in and see what happens. if you need a new motherboard you can grab one here amzn.to/1Kmvvyr
@seankappock56718 жыл бұрын
Hello love ur video but I have a question, I just replaced my gyroscope on one side cause the one light was stuck on and that side had no movement. The light problem and movement is fixed but when I step on the side that I did work on it kicks backwards and won't let me control. But only on the side I worked on. I'm buying a new gyroscope just incase it was a bad one but do u have any suggestions cause u seem to know what ur talking about. Thanks
@johnnyamicci31958 жыл бұрын
i have never had problems just replacing one gyro but i have heard from others that if your going to replace one gyro its best to replace both of them at once
@crissantiago41958 жыл бұрын
My hover board turns on both of the middle lights green and the side lights blue, it doesn't move when I get on it though, what do you think is wrong with it?
@johnnyamicci31958 жыл бұрын
sounds like you need a new gyro amzn.to/28JKRA3
@jakiyahsavage8699 жыл бұрын
keep it up
@GrayToaster8 жыл бұрын
I have a problem, whenever I'm ready to get on the hoverboard I step one foot down then the side I stepped my foot on goes backwards. can you help?
@jroon51467 жыл бұрын
We bought a hover board and four days later one side stopped working and now both sides are not working.There is no manufacture no serial numbers nothing and the store refuses to return. If we order new sensors do they work with my hover board? or do we have to find the part for this manufacturer?
@Lolorey648 жыл бұрын
how can i fix with one steady light when i turn it on
@Kyngquezygaming8 жыл бұрын
You cant you have to buy a new gyro, it's the chip on the inside of the hoverboard.
@ricardodeleon71697 жыл бұрын
dude please help me I just newly replaced my gyro sensor but after a few hours my hover board got broken again. one side doesn't work. the blue light doesn't flash and stuff like that. i tried to oprn it to reconnect it but nothing happened.
@ndalton30348 жыл бұрын
My board has one light on when I turn it on and that side dosent move is it the pressure denote or the gyroscope
@johnnyamicci31958 жыл бұрын
+N Dalton you probably need a new gyro. checkout hoverboardscooterparts.com
@denzelscruggs8 жыл бұрын
What's the name on the pice I need to get
@johnnyamicci31958 жыл бұрын
+Denzel Scruggs what problem are you having with your board? if its the problem in this video you need a gyroscope. this is the piece www.amazon.com/Gyroscope-Gyro-Replacement-Balance-Scooter/dp/B01BCPPF4W/ref=sr_1_1?ie=UTF8&qid=1463581843&sr=8-1&keywords=hoverboard+gyroscope
@Logiicalexe8 жыл бұрын
do i have to be grounded when replacing the sensor?
@johnnyamicci31958 жыл бұрын
+Logiical.exe no
@Jimboo08258 жыл бұрын
My hoverboard suddenly stopped moving. It turns on, but won't go when anyone steps on it. It might as well be off. Could this be the issue? I tried re calibrating and it still won't work.
@johnnyamicci31958 жыл бұрын
sounds like you need a new gyroscope like this amzn.to/28JLtpz. just figure out if you need a male or female before ordering.
@connorbaldwin39989 жыл бұрын
Causes that nipple to rise. Lol
@aedanesguerra85034 жыл бұрын
I have a problem with my hoverboard my hoverboard is 4 yrars old and now it vibrate when i go forward and backwards
@ericturco4258 жыл бұрын
helppp plssss my hoverboard doesnt tell me when its running out of battery so it says its full so i ride it but about 45mins later it dies and you cant turn it back on pls helpppp
@nick30068 жыл бұрын
When I get off the hoverboard it start freaking out is this how I fix it?
@johnnyamicci31958 жыл бұрын
could be one of two problems. first is an air pocket under the foot pedal. cut a slit in the foot petal. if that doesn't fix it you need a new gyroscope. amzn.to/28JLtpz
@nick30068 жыл бұрын
+Johnny Amicci so I cut a slit on the actual hoverboard pedal?
@nick30068 жыл бұрын
+Johnny Amicci also my hoverboard leans to one side
@user-tz2jn2iw2z7 жыл бұрын
Dude help me, my hoverboard was shaking alot (because i did it on purpose) and it when i rode it, it stopped at random times and it doesnt rotate well, why?
@johnnyamicci31957 жыл бұрын
what did you do on purpose? typiically shaking is either a bad gyroscope or an air pocket under the foot pedal
@romelcarey79788 жыл бұрын
my hoveboard stop working both lights on top is red what to do
@gunnarteeple20387 жыл бұрын
Romel Carey fix both gyroscopes
@blacklivesmatters12589 жыл бұрын
My battery keeps dying fast like in one hour of riding! this video helps but does not help my issue!
@luigi56088 жыл бұрын
My problem is when you step on the sensor it makes a noise like tock!