How configure telnet on a cisco switch using putty

[@CurtisCallawaychannel]

premium. - I was Systems configuration engineer for our Cisco hardware at a large international company 5+ years ago; and you hit the nail on the head without going into excruciating detail. Real Instructor level stuff. - keep it up. - I couldn't remember a syntax and you helped me find it quick - then i went back and watched your whole video. - Great job!

[@thegreenroom5820]

I’m just starting to learn configuration. This tutorial made it way less intimidating. You moved so smooth without complicating the subject by over explaining. Thanks for putting your time into this. You are my favorite KZbinr

[@justinperry7762]

Dude, I needed a quick refresher and this was on point. The music had a good flow too. Appreciate you.

[@ahmetkaytan5924]

Bro your videos very nice but music is too loud.Not really easy to hear you, pls reduce the volume or put the mic closer to you!!

[@Freddiescott20]

One of the best teachers out there for Cisco so simple

[@vfries2]

good video. What I like is that you don't move to quick and I can follow along on my end.

[@lgbnaf-fi9oy]

Bro just found ya channel started my journey about 6 months ago, really good looking out for taking time too help us beginners , big shout out from atl, keep it up man

[@rjimmy1989]

Thanks for going slow and taking your time explaining it unlike my teacher. You rock!

[@carltonsmith9516]

Thanks , you make a good CCNA teacher

[@jamesbradley7444]

It's teaching like this that makes studying worthwhile. Thanks bro keep it up.

[@geraldvaughn2709]

Great info. However, the music was too loud. It would be best if the music volume was decreased by 50 percent.

[@captaincommando9839]

The video pacing and ultra-hype music cure my burn-out.

[@coletraintechgames2932]

I really like this man. Your voice is much clearer than others, and you take the time and care. (thank you for doing this) So many others mentioned the music volume and that is true. But what drives me nuts is the windows bings! Holy cow, they like make me jump! I'm a laugh about it guy, so hopefully it's taken that way. Anyway, thanks again, I will definitely check out more of your stuff.

[@Slawek.K]

Duan , great video and channel! Subscribed aready! Do you need to plug the cable into a PC/Laptop and the Swict every time you need to use Telnet? I thought you can access the switch anytime from anywhere once you assign the IP address to a management Vlan1?

[@samjones4327]

Thanks again for the info! Very helpful 2 see actual equipment in action!

[@williamgupton8770]

I enjoy ur video..i learn so much.its hard for me 2go back 2 sleep..i just want 2 boot up my lab and make some noise 😆 😆..thanks again

[@lawrenceoliva7360]

2:26 if your gonna type cli commands gotta look boss doing it... I rate it man sick video

[@gemos7777]

loved it brother thank you,,, I am mba in It student and trying to understand networking of ccna...but it was just theory theory ...no practical.. now I have bit knowledge about how things really work..

[@LabEveryday]

+Jamess Hamal That’s great. Networking is definitely a journey. I wish you much success.

[@timamumuhuri2649]

Thx for your good lesson sir

[@rohitchatterji1783]

Awesome video bro...are you local to NY NJ area ?

[@LabEveryday]

Thanks. No I am in KC.

[@nashaatmena7687]

thx for your valuable information video

[@chibuikemonyeneho7275]

More vids like this would be dope

[@non2614]

sir , we want use telnet for we router we should use cable or insert ip address inside space putty , and right now you use cable???

[@ahmedsattar122]

you are the man .... thanks for your amazing video

[@LabEveryday]

You're welcome Ahmed and thank you.

[@1extraa1]

CAN'T HEAR YOU OVER MUSIC. VOLUME FOR DIALOGUE IS TOO LOW

[@LabEveryday]

+Baud Rate Ok in the future videos will be more balanced.

[@Potato-pc4dg]

@@LabEveryday no music at all would be better for us trying to understand and learn

[@drgrockster]

QA very nice tutorial, but yeah just lower the music a fraction :)

[@zubairsiddique4341]

superb video......keep it up bro......but if you said what is telnet? why and when use telnet? what the advantage of telnet? than it will be better ......btw......thanks a lot.....bro......

[@maximillianramirez1189]

Excellent Video! You really helped me out with this one.

[@caribeangamers]

Thank you very much for your videos man, they're very helpful.

[@isaaca9123]

Thank you for the good information Du'An. I've been studying for a bit, so i'm not too unfamiliar. Just to be clear, you aren't able to connect to the internet, just to your switch for lab testing of telnet, correct?

[@towermoss]

keep up the good work. in this video however, the music is a little too loud and drowns out your voice a bit.

[@clippergrinder5357]

Do you ever do PC Repair Tutorials. I'm trying to prepare for the Comptia A+ certification

[@LabEveryday]

I have not. Have you checked Professor Messor?

[@tapersandfades4512]

Du'An Lightfoot yeah, but I'm always trying to checkout more resources in case on source leaves out something crucial

[@jimcorey7483]

Great job, and yeah ditch the music.

[@ninoman123]

Great video. Appreciate it

[@rajneeshyadav5681]

U r excellent thanks bro

[@LabEveryday]

+Rajneesh yadav Thank you.

[@olmokobie4471]

Hi Duan I'm a beginner and I have one 2950 switch for a lab and was working well until I connect it to a net gear modem-router combo that has access to the internet.The switch worked well for about 5 to 10 minutes had good ventilation and 2 pcs conected, and then it start to show random symbols,letters and numbers every time I write a command line. Could be that the 12.1 iso get corrupted in some way some how, or cisco itself encript it for some reason. Please bring me some light, thanks.

[@LabEveryday]

Sounds like it could be a couple of things. Did you restart the switch and it did the same thing? Are you using putty?

[@olmokobie4471]

Thanks for answer , yes I restart the 2950 switch, and yes I am using putty. To test the cable, the adapter and the pc ,I swich to a catalyst 3750 and worked fine. The 3750 has never been conected to the internet, I dont even know if im allow to connect them to the internet.

[@LabEveryday]

When you say connect to the internet, you mean? Does it only have that issue when you connect it to the netgear modem?

[@LabEveryday]

+Olmo Kobie is this with a console connection? Change the baud rate if so and see what happens.

[@jer574]

Can you do a future video on ACLs?

[@miguelduran1549]

hi, i repair a 3750 catalist switch, it doesn't start, it can flash the bios or memory in order to upgrade the firmware ??? thanks

[@inkbythebarrelandpaperbyth6905]

I love your content man but I can barely hear you for the music.

[@lgbnaf-fi9oy]

Just got my help desk, want too be a network administrator, trying too decide on net+ or ccna

[@maythamalzarqani3962]

It’s nice thank you sir, but the background music bathing me. Any way thank you, and just keep make Cisco videos

[@eddiem4868]

how rare is it for these cable to be bad? I have trouble connecting to this one router via serial connection just hang can't prompt for anything. I've made sure the serial to USB drivers are installed ready to go but not sure if the rj45 to serial portion is working

[@jorgenrhodejensen]

hi D, just a suggestion. In your videos we hear a lot of windows notification noise, which can be distracting. My i suggest changing the sound scheme to NoSound when recording. Just my 2 cents. As you may know telnet is an insecure protocol that would send passwords in clear text across the network, not a prob in your homelab, but frowned upon i. most enterprises. Perhaps jist mention SSH to your viewers, ormaybe even do a seperate video on that topic.

[@jorgenrhodejensen]

Great - Please dont take this as me complaining. Just suggestions - I think you are doing a great job on this series. I think you are right, that everyone have to start somewhere, so doing the basics first it crusial. Keep it up

[@jorgenrhodejensen]

Glad to help - I like watching them - I still pick up some good nuggets from time 2 time.

[@amwin7]

Can you access another switch from another switch?

[@dswynne]

I hope you set up a lesson playlist plan...

[@dswynne]

Just organize your videos in the order that they should be for new students, that's all.

[@user-us2hx3xo8e]

When typing the commands I cant use some of them like sh vlan or sh inter 2:35

[@Alimgh33]

can you make video ( telnet 2 sw and ping them together )

[@dreierowsky7661]

barrdzo fajny fil,mik panie czarnty

[@rahmanruston4474]

Du'An, thank you!

[@LabEveryday]

You are welcome Rahman.

[@kenny-techsolutions7647]

can you make a video on how to reset a 2950 series switch

[@baraaali8926]

hi duan .. when i ping my cisco swich which is at office from home via cmd . i get the host is unreachable and i cant access it fvia putty telnet.. can you help

[@LabEveryday]

Hello, were you able to get this to work?

[@younesmadani191]

thanks dude

[@abhishekshah11]

You lose the first packet because the nic performs ARP

[@oniongaam]

Thanks bro

[@LabEveryday]

+Andrew Onionga You are welcome fam.

[@sterlingbourne6459]

@@LabEveryday your content is great but do you have a video on how to connect our switches to router? and configuring them so that they work together?

[@vincentmumba9202]

Great

[@ashmah7256]

Thnks for sharing this video. I am trying to connect switch with pc . it was already configured by someone else . He give me ip address to telnet the switch . Now the problem is I am using Cat5 for connecting the switch. My Pc have only one ethernet port and internet is connected by wire to my PC .if I connect cat 5 to my PC I have to remove internet wire. My question is if I need to remove internet wire how I can connect with switch??? I am really confuse now and really inneed of help

[@thechronic555]

lemme do what he do cuz u never gonna reply. have you gotten this resolved?

[@fmiranda]

Great videos, but background music is very distracting and make explanations hard to understand for no native speakers. I understand you really like your music, but please share it in other channel.

[@TheRealDealVideos]

Stop the DRE beats man, makes me wanna get high everytime :D

[@ladariushill3827]

i'm a marine a been taken ccna class online though skillsoft for about 2 weeks now its roughly over 124hours of video just for the ccna . Have you heard of the skillsoft being a good program to use ? ****you may see this same post on some of you fellow youtube page too i just need some guidance from some of the pros ***

[@ladariushill3827]

yea your right all the video are taught by him . for the past 7 year i did not have to work with any routeing and switching but new gear i have requires it . I so far learned how to ping from 1 router to router another on the other side of the globe but still have a long way to go before i can fully understand from what i see. Also i will have my home lab delivered tomorrow so hopefully that should help but i will try out the other 2 also

[@ladariushill3827]

that would be great thank you

[@lgbnaf-fi9oy]

My first help desk job I meant

[@CrisisGuildWOW]

the "sh" command does not stand for "shell" it short for "show", fyi.

[@g.choppa4448]

You need to turn off the music . Otherwise good.

[@robertchiew8295]

Video is good but scrap the music...

[@philton2462]

can someone help me, i followed everything but when i put #no shut it says I am administratively down

[@LabEveryday]

Were you able to get this resolved?

[@rizwankk123]

Music is louder than your voice. Plz dont put music in ur videos. Its a request. Ur videos are very good but ruined by music

[@mphomalumedzha9291]

The background music it's disturbing your voice we can not hear you

[@reelnautee]

Terrible music , So distracting in a learning / how to video. What world are we in?

[@LabEveryday]

Some people enjoy it. Thanks for viewing.

[@rustyb78]

Turn down all that music and your computer noises.

[@Im_uday958]

Why this music bro

[@kilrathiavenger]

Music far too loud

[@dreierowsky7661]

nawet zajebisty bym poweiedzial

[@CrisisGuildWOW]

He doesn't explain any reasons for issuing commands. He just memorizes the command line syntax and just says "thats what you have to do". Anyone can memorize a list of command structures, but to fully understand what they really mean is something totally different. Very poor skill set not to know or not be able to explain why you do something.

[@adipurnomo5683]

Telnet is not safe bro

[@independentview854]

my like was 600

[@munkithabid3434]

dislike for the music

[@DiffEQ]

So you make network tutorials but can't figure out how to set a reasonable volume when you do?

[@NetworkEngineer]

Nobody is perfect.