HOW FLOAT BALL VALVES WORK - Plumbing Tips

[@plumberparts]

*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts Plus, follow my *Vlog “TimesWithJames”:* kzbin.info

[@Jo-y7x]

Thank you for the informative tips, I have a little problem with my ball valve on my water tank, It wont drop water if it was all the way down, it only drop water if I pull it and hold it to the middle If I moved slightly a bit downward or upward it stop dropping water so I have to hold it in a specific position for it to work ( I currently put a rope temporarily to hold it on that exact position so the water keep dropping) (also the water stop dripping if I moved it all the way up which is what the ball valve supposed to do as you explained, so at least this is still working) Any Idea what the problem could be ? (Could it be there is some dirt/sediment stuck between the ball valve and the pipe that give water or is it a problem in the ball valve itself ?)

[@DaveLowe28]

Thanks for this vid. Didn't know you could get different size jets, this may have fixed a problem I've been having with a slow filling cistern.

[@stakeford841]

Thanks for the tips on replacing a new donut fitting and new float for toilet, first time l have done this and was excellent video, cheers!

[@plumberparts]

No worries mate! So happy to still be helping people out with these vids - BTW I'm still uploading AND have a VLOG CHANNEL called TimesWithJames. Subscribe here👉 kzbin.info

[@jamie2922]

Do you have any videos on how to repair a leaking toilet Modern float valve

[@ms4h13]

You not only know how to explain, but you do it in a super funny way! Congratulations mate, well done! :-)

[@yononable]

thanks pal, i am all out DIY's and every bit of your tutorials means a lot.regards.

[@daviddawson9099]

Just watched a second time as have trouble again. The last bit about connecting it via an olive or washer was very useful. I had trouble sealing it last time as have a fibre washer fitting and it was a pain. I am imaging n olive and o ring would be more reliable.

[@Mghanabro]

Another Excellent video I need some help I want to use to water pipe input to same container Pipe 1 normally supply water and pipe 2 only supply if there is no water in pipe 2 how can we do this with normall plumbing equipment without electrics

[@adammoodley2722]

Great video thanks. But how do you adjust the ball valve? I am having a problem with mine where the ball is not rising high enough to fill the cistern (holding tank)

[@HazelAndrewsAcupuncture]

Amazing vid.....I'm off to fix the leaky toilet ball valve.....if I can find the right sort of washers!

[@pablob618]

Hi James, your videos are great!!! I have a question related to the valve. My valve/pipe is doing a strong noise when filling the loft tank. It is like air coming out with the water. This is not constant during the filling process, but only between minute 2 and 1 before the tank is completely full. I know is only one minute, but when someone is taking a shower it is in the noise spot for much longer. I changed the ball valve with a similar high pressure valve, but it did not solve the problem. Any ideas how to solve the problem? Thanks a lot!

[@richardevans3253]

I have this problem . Did you solve it

[@woodbine66]

Hi. Thanks for another great vid. With the brass ball valve in the video, should it be connected to the pipe with a 3/4" tap connector?

[@kevinbeck6785]

Great video did not know it could be just the ball float could be faulty Thank You again

[@simonbuenosaires]

Thanks alot, great advice i was watching closely, no it wasnt boring, please post more, thanks for this one

[@daibhiseaghdha153]

how about an Ebco equilibrium float valves, with the gunmetal body and seating, plus copper float, limescale causes a lot of problems on float valves, have you found out about - Keraflo Aylesbury 'K' Type float valves delayed action type valves,

[@fuzzy8mike]

Excellent explanation! Now to see if you have a vid on pan connectors. What a convoluted contraption that is !

[@plumberparts]

Will do mate! SUBSCRIBE! ➡️👉 kzbin.info 👈⬅️ IF YOU HAVEN'T ALREADY! 😎

[@GK-qc5ry]

Great video only problem with mine is that the valve screw doesn't come off and I'm afraid to apply too much pressure to take it off.

[@1954BJohn]

Informative and entertaining - couldn't ask for more !

[@aretiioannou8505]

Excellent ! Thank you for explaining ! 🙂🙂👍

[@daibhiseaghdha153]

try and do it sequential, isolate the water supply first ---- then show all the different float valves, as there are so many different types these days, and they are a puzzle if you have not done that particular one, hardly ever see a brass " Portsmouth " float valvet these days, they are so simple and reliable, I use to work in hospitals 50 years ago. 4" bore cast iron equilibrium float valves, fitted with molded leather washers, and 20 " diameter copper floats, you needed a wheel barrow to bring them down to the workshop. I like your attitude, and your teaching skills. keep up the good work.

[@ultraknightowl]

Help me ..I am looking for a valve floater like the one you are showing in this video . The only thing I want the water going in and out only were is meant to be no were else .I dont want it to drip like the swamp coolers float valves that drip water where the floater connects .

[@razor6699]

Of course she loves it that's why I'm with her! She won't go to Asda anymore during your shift though - worried that you might hit the Aston whilst you're collecting trolleys. You are the one in the string vest aren't you??

[@mattthomson1982]

Always enjoy your videos mate, whilst making me laugh 😆

[@mdon1662]

hi the ball keeps falling out what can I out to hold it in its plastic clip

[@keanleeooi9140]

Where to buy the rubber.

[@royperry9415]

i worked in a factory in bilston west midlands for 17 years and we manufactured these and part two ones by the thousand now they are mostly made in italy or china a few manufacturers might still exist in england but i dont know of any

[@wbdrugstrat]

Hello. Great vids. I will definitely be keeping up in the future, as I just discovered your channel just now. I have a question about ball valves and alternatives. I am installing mid to large tanks around my house, and want to maximize the water intake to each tank and make the filling-up process as fast as possible. I am noticing that the 3/4 ball valve that is installed in my only fully-built tank experiences some degree of inefficiency between the intake of its 3/4 ball valve compared to my new tank (which does not have a ball valve at the moment, requiring me to use the manual shut-off to not to make a mess). I am wondering if there are alternatives to ball-valves that would allow for better flow. I am currently contemplating increasing the head of the pipe from 3/4 to 1 inch, and applying a 1" ball valve instead. Any thoughts?

[@plumberparts]

+Carlos Perez You can replace the jet in the ball valve for increased flow. Remove the white jet and install the red instead. Sub here please>> kzbin.info

[@mcnabster]

Thanks PP. I enjoyed that.

[@diyman-kf3rg]

Excellent advice 👍

[@ArksE8]

will they work for toilet cistens

[@anzbatman2297]

Thanks bro, you're a legend.

[@ufewl]

thanks man, work up last night though it had been raining heavy cos I could hear a heavy drip, then I realised there was no rain forecast and eventually that the dripping was in the house, water tank over flowing ( the overflow pipe does not work as the end of it is higher than the top of the tank!! thanks to the twat who installed it!!), this was helpful, will have a go at fixing it tomorrow, I have done it before a very long time ago but was low on confidence, not so much now!! Cheers!!

[@pxy24x28]

Good video.

[@federicoprado7497]

nice keep blog sendi ng support

[@michaelsarsfield6785]

Very useful video!

[@mun268]

I like this video. Good channel too. Good deal, cut plumbers income to size.

[@mrmmhxx]

many thanks !!!!!!!!!!!!!

[@Bin95]

The modern ballcock was invented by Joseph Bramah (1 of fathers of hydraulics) and Thomas Twyford (made ceramic 1 piece toilet and the Thomas Crapper's toilet). TIP: Get a finger cut, no 1st aid kit... duct tape works for everything. :>)

[@CurvedSlightly]

I always go rear entry, side entry is difficult and she don't like it!

[@ufewl]

So this video was of of little use, you gotta have the tools, I just about had enough, then you have the fear something will go wrong, like I found the arm was too long and the ball hit he other side of the tank so I had to adjust that, then when I rejoined the the water pipe it leaked at first so had to re-tighten, I also bought a ball valve repair kit for £1.50 for next time it goes. NIce to have running water back in the house again!!

[@davidhale8034]

You do put some stupid comments.

[@ufewl]

to be fair a lot of people will teach themselves to do such jobs one way or another or no a man who can, I'm no plumber and did this job myself pre-internet, most have neither the confidence the tools or the time to have a go themselves, those who do could probably do the job themselves without the video, they can get DIY books as well etc... One difference is in the recession unemployed people have the time to do the job, and no money anyway!!

[@davidhale8034]

err ..... okay ..... well done you understood what the video is for. Cant imagine what you think that contributed though.

[@ThePunjabiman47]

nice its helpful :) and bless for ur finger :)

[@ufewl]

??? not sure what you mean. Anyhow I actually fixed my ball valve today and this video was of little or no use to me because I actually replaced the whole assemble with a new one (cost £10.50 in all) but could have got a cheaper one for about half the price. I mean he has a nice new system there mine was coroded to fuck so I thought replacing was better. Biggest problem I had a was disconnecting the ball valve from the water pipe, hard to see what I was doing as tank is 6 inches from the ceiling

[@davidhale8034]

Another one. Who the fuck trolls a ball valve video???? Get a life dude.

[@jamief1979]

another gd vid m8 nice to see youve had ur nails done lol

[@johnjarvis4819]

How do you know it just wants a washer? Xray vision. Whip it off, dump it, and replace with new for less than £4. FFS...

[@razor6699]

I'm sure she will appreciate the compliment although as you come from a country that produces such specimens as Susan Boyle it obviously doesn't mean as much! I understand that's why you sweatys spend most of your time 'tossing the caber' or so your mum/wife/sister was telling me the other day; you're a lucky man she seems to have a really nice 'personality'. Still never mind, it gets dark before bedtime up there doesn't it??

[@simakist]

Omg Its Bradley Cooper's Twin Brother!!

[@acefreaky]

I was not born a plumber but after several likewise jobs i decided to re train thinking that sticking to one trade would do me good.a mistake of sorts as after my nvQ2 ,corgi then gas safe training and registration of course anyone with you tube can now carry out brain surgery but what about someone who has become expert .through the fire of mistakes and frankly shitty and strange customers Ye to do the basics no problem with a few tricks but to find your fingers sing well thats more gladiator..

[@Cumbriahandyman]

Nice one, but I just replace them rather than fix them. Still waiting for some more pipe bending tips. Now get plastered finger out! :o)

[@thanxx]

You need to quit plumbing and concentrate on trying to find some tv work. Your deffo a natural in front of camera.

[@EC-ge3do]

Word ! haha

[@razor6699]

Dickie are you a course cowboy or do you work for Shittish Gas? Real plumbers just turn the old washer over son ;-)

[@acefreaky]

Although I love teaching people how to do plumbing ....guess what I have learned ? you only put yourself out of business ....and as to cutting plumbers income try getting paid 35 pounds to fit a ball valve (300 degrees heat in the loft ) half an hours drive there twenty to do the job then half hour back. Yes were all earning fortunes in the recession .....Bollox !