HOW GOOD IS LIQUI MOLY CERATEC? HOW LONG DOES LIQUI MOLY ENGINE OIL ADDITIVE LASTS? MARUTI SUZUKI

Oil change with Liqui Moly Ceratec. how long does Liqui Moly Ceratec lasts. fuel efficiency with Liqui Moly Ceratec.
Liqui Moly Ceratec review in making. Share your experience, opinions and questions in the comments.
Instagram: / the_sportztourer
Liqui Moly Ceratec: amzn.to/3ZKm5Gq
#engine #engineoil #lubricants #additive #ceramic #ceramiccoating #longdistance #friction #liquimoly #ceratec #ceramic #efficiency #oil #review #digitalcreator

[@subhayanmaity9667]

Just a small suggestion - put your channel name on the cover of the reel. I'm a regular follower of your channel so I'm naturally interested in such types of videos. However, prior to clicking i had no clue that this video is from your channel. Just a small suggestion, hope this makes sense.

[@NikhilDangui]

I have used in my 2013 swift petrol. At current price of 1500 it's really good product. Smoother drive, engine more responsive, negligible mileage incresee 0.5kmpl, Effect lasted 40k km

[@theunbeliever8921]

I would rate this by far one of the best, if not the best, engine oil treatment on the market👌 Have used this product in multiple cars Duster 110ps, Innova and Rapid tdi.. Excellent product if you want to enhance the longevity of your IC engine. Use every oil change if you can afford it, otherwise one application is good for up to 50,000 as per LM.

[@realworld822]

For the price, you are better off just changing the oil more often

[@Mike80528]

@@realworld822 Not true, but this is the most common answer from those unfamiliar with what Ceratec does.

[@AveemAshfaq]

I used it on my Maruti 800 whose crank bearings were gone. I used the bottle 100 kms after oil change to see what's what. I could clearly see added smoothness and reduced noise. It works the best until oil change. After that, it maybe works slightly till second oil change. But that is it

[@yadugirin2564]

So only for two oil changes and after that the effect is faded out

[@jrhamilton4448]

I became a believer when I used it to stop what's called the "typewriter ticking" sound in my 2021 mustang GT. I poured it in and started it up and the noise was gone immediately and hasn't come back.

[@thesportztourer]

Yes! I have heard the same from some diesel engine users. Thanks for sharing your experience with the Ceratec on the Mustang GT ❤

[@tejaswibm]

I have used ceratec on my Swift diesel 2010 model after running 50k kms(yes it has run less). Post addition of it, the engine noise has reduced and it's smoother now especially in highway run..i have done 10k.kms with ceratec and believe it's good considering its long expiry. Mileage too has increased but I have used LM injector cleaner as well. I don't know if it's due to this or ceratec

[@kartikav4834]

Thanks for writing this. Did you see any big difference in city traffic conditions? Because, usually NVH level raises when it is stressed in city traffic conditions.

[@tejaswibm]

I don't know how to quantify this, but in my case, the nvh levels did reduce in city traffic too. And I live and drive in Bangalore and it's synonymous to traffic!

[@kartikav4834]

@@tejaswibm that's what I was looking for. Thanks

[@yadugirin2564]

Hey thanks for sharing this, i have a question after every oil changes this additive has to be added back?

[@rider67dinu]

​@@yadugirin2564If u can afford u can or add every 20k or 30k kms

[@ahmeda8446]

I used it in Fiat Punto 1.4 petrol. Observations are. Low engine noise. Vibration reduction. Smooth acceleration. No positive or negative effect on fuel consumption.

[@shree397]

i've been using this on multiple cars that I've bought, and honestly, this is one of the best products if you need to maintain your car's engine, BUT REMEMBER THIS WILL WORK BEST IN TANDEM WITH MOS2 OR ELSE, THE RESULTS WILL NOT LAST FOR THE CLAIMED 50,000 KM .

[@jaynikk758]

I have Liqui Moly High Tec in my vehicle, do I put a bottle every oil change?

[@rahuladvisor]

so u have to keep the same oil for 50,000 kms or it will work even after oil change or we have to use small qty in every oil change?

[@SwiftractPtss]

I heard from a LM video you should not use them together at the same time! Do not mix MOS2 with Ceratec or it will be harmful for the engine.

[@shree397]

@@jaynikk758 this is not required to be put every oil change, what do you do is put it once and then count till 50,000 km and then add it back again. But to keep the effect of it better use mos2 between those 50,000 kms on every oil change.

[@shree397]

@@rahuladvisor you don't have to keep the same oil once the oil has run its course of 10000 km with ceratech in it, it will chemically bond with your engine, The next time you change the oil add MOS2 so that the effects of ceratech can last long. Typically the effects will last around 40 to 50,000 kms after that you will have to put ceratec again .

[@amoghavarshamurthy]

I have only added 100 ml to my engine oil instead of 300 ml and I still see the effect of improved mileage and higher revs in the engine. I plan to add 200 ml in the next oil change and check the effects. I have a 1.6 Vento Petrol. There is a definite increase in mileage. Given the high price of petrol, I feel this additive pays for itself.

[@gvjan]

I'm a Rapid petrol owner, how much mileage increase was there?

[@tonygaytan9848]

My 2013 Accord has 110K and has an oil dilution problem this is the 1st time using CERATEC, and noticed the difference when engine is running.

[@sijumoothedath9358]

How can we use this?? The time of oil change or any time with engine oil??

[@veggourmet1467]

its amazing, better than Mos2

[@AshutoshKumar-se7wt]

ceratec is for brand new cars but for older cars better to use mos2 ... if u need more details feel free to comment on me

[@amitmahadik4985]

For petrol fuel using ceratec how much km new car has to driven and to use MOS2 how much km has to be driven..more over which type of oil has to be use with these type of engine additive..please reply.

[@marcelocuadrado6955]

For a boxer engine whit 160.000 km Ceratec or liquid moly mos2 ?

[@kartikav4834]

Most of it will go with the oil while changing, right ! Then it's effect will drop with every oil change is what I think. Correct me if I am wrong

[@tejaswibm]

Yes. But the technology involved and chemical composition make it to stick to the wall of the cylinder and other components and do not flush out with oil change since only a very think film is required for protection. If you use engine flush, then it might remove it.

[@kartikav4834]

@@tejaswibm got it. Thanks a lot sir.

[@maxdruciak2724]

Should be good for cold starts. After the engine is in working temperature how could it give any benefit? Car engines use hydrodinamical lubrication for its axles, journals and moving parts. Once oil pressure is built there is no friction between them.

[@Mike80528]

Yes and no. It treats the engine. The filled gaps remain filled, Scratches do not happen that frequently in a car that is well lubricated which is why you can use it periodically.

[@deepsoul4737]

Sir.please say ...what happened if i used liquimoly mos2 and ceratec together.

[@100pyatt]

No downside

[@swedishtruther3166]

Dont it will put your oil specs in bad balance

[@ebby8189]

Brother please test amarol nano lube??

[@rishirajsinhrana6132]

it is good but effect lasts only for 1st oil change

[@realworld822]

You are 100% correct

[@cheezyllamba]

1/2 true. It’s part liquid part physical. Using in tandem with Mos2 on the second and third oil changes, that re adds the component you lose when you do your second oil change. But in your 4th you re add Ceratec and don’t add Mos2.

[@sudipnandy2003]

I used in 2010 swift diesel, no change in smoothness

[@gavinzheng1486]

I am interested in this product but a question for that . Does this one for when I do oil change? I mean when I do oil change ,add it ,and run 20min then drain with old oil ? or when I add the new oil into engine and then add this and not gonna drain it?

[@3rdclasstatamahindrabajajRE]

Add it to new engine oil. Its not like engine flush. When u add new oil, mix this.

[@gavinzheng1486]

@@3rdclasstatamahindrabajajRE ThanksI did yesterday

[@dindips]

When to use ms02 vs ceratac, my car is Tigor petrol 30k km clocked?

[@thesportztourer]

Hi, You can go ahead and try it for your next oil change.

[@dindips]

@@thesportztourer MS02 or Ceratac and that too with Synthetic oil I can go.

[@AshutoshKumar-se7wt]

if your car is showroom brand new then use ceratec..other wise use mos2

[@praffuls2104]

i saw a video on youtube with channel name project where he tested his additive with comparison to a normal 10w30 oil and it performed same or less than the conventical oil.

[@RadhaRadha-ji2oj]

My ertiga vdi has done 1,40,000kms can i use it all services done from Maruti authorised service centre only

[@3rdclasstatamahindrabajajRE]

You can use it. It is good especially for Diesel engines

[@milanm3997]

Is it possible to add additive to the car without changing the oil? I changed the oil 1500km ago. Do I need to replace with new oil and then add an additive or can I use this oil that has passed 1500k

[@Mike80528]

You do not need to change the oil. It is not an oil modifier, it's an engine treatment. But you want to be sure to run it for an extended period for it to really work.

[@dougschmidt4137]

Any idea how this will work on a gen2 Prius hybrid that burn a little oil?

[@3rdclasstatamahindrabajajRE]

It dosent help for burning oil. Get compression test, valve test and piston rings test

[@krisshrj4525]

Can we use this on an automatic transmission?

[@alstound]

I don’t think so. It specifically says manual transmission.

[@3rdclasstatamahindrabajajRE]

Dont use for automatic. Manual cars runs on dry clutch. If you add it to automatic or wet clutch, it wil slip.

[@aunknownhunter7343]

Please make a complete update on the ceratec it has been waiting in my amazon list as well should i buy it ???

[@rahuladvisor]

so u have to keep the same oil for 50,000 kms or it will work even after oil change or we have to use small qty in every oil change?

[@davidlo8901]

Change your oil every 5000 km, the ceratec will stay in the engine.

[@3rdclasstatamahindrabajajRE]

If you run same oil for 50k kms, engine will die. You have chnage oil as per company intervals. Add it every alternative oil change.

[@sy_0071]

Looks like milkmaid 😅

[@tahami4144]

If someone hadn't covered it in liqui moly my stupid ass would definitely have used it on my roti

[@R.F.S.13]

Can we use this on aircooled scooter with 125cc displacement? Thanks in advance for those who will reply 😁 Suzuki Burgman EX to be specific

[@omkarkhamkar9388]

Yes.. you can use it on every IC engine

[@3rdclasstatamahindrabajajRE]

Yo, dont add it in motorcycles. Clutch gonna slip.

[@kprith15]

Can we use it in Diesel engine?

[@PFULL1]

Yes

[@smitgandhi1868]

Does it work with bikes especially RTR 200 FI 2018?

[@recklessrohan4600]

You can't use this product in wet clutch engines (not recommended)

[@moy14ss35]

Can this be used on Audi a4 gas?

[@thesportztourer]

Yes, it is compatible with petrol engines.

[@8888rajrana]

Test should be done after 20k

[@syazwanjunggal4993]

what M oil can mix with CERATEC

[@Mike80528]

Not aware of any limitations.

[@MrBluoct]

Not a fan of the color change to perfectly clean honey colored oil

[@ryansil5854]

Will it work on a motorcycle?

[@nomoresrx]

No, it is not recommended for engines with a wet clutch, which is applicable for most motorcycle engines.

[@augustinsunil5949]

Does it work with Bikes?

[@nomoresrx]

No, it is not recommended for engines with a wet clutch, which is applicable for most motorcycle engines.

[@sanjayborah041]

can i use my bike

[@Mike80528]

Only with a Dry Clutch, but if you have a dry clutch then yes. It is OK for any combustion engine.

[@sanjayborah041]

@@Mike80528 bike have wet clutch

[@GokuInstinct1]

I just want toooo, I just want toooo, I just want tooooooooo say benchod! What a great video bloody goat!

[@anthonyjose5644]

Trash product. DONT USE ADDITIVES

[@JacobLambeCarGuy]

One important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?

[@AshutoshKumar-se7wt]

ceratec is for brand new cars but for older cars better to use mos2 ... if u need more details feel free to comment on me

[@omardsm2323]

Details

[@Raggandrist]

Can they be used in combination with each other?

[@submariner144]

Why? and why you not replying? answer it.

[@carname7391]

What does mean older cars and new cars plz explain....We don't have ambassadors padminis Fiat, mahindra majors or or cars before 2010