How I Built A LEGO SPR 208 Sniper + Behind The Scenes Footage

Рет қаралды 10,435

Kevko183

Күн бұрын

Пікірлер

@kevko183 2 жыл бұрын

Yep, thats how I made it

@Monster-st8hb 2 жыл бұрын

Kevin, a common problem that i face when making these weapons are 1.trigger bending (and it broke) observable on many builds 2.the mechanism of this firearm is YEETING (well not so much) YEETING the bolt and try Harding to pull back the bolt and it usually causes jamming (observable on the snyzer-tech Deagle)

@Monster-st8hb 2 жыл бұрын

oh, forgot 2 add, snyzer was correct on rotating the bullets because the bullets have cracks in them and will be stuck so you can't chamber a round 2nd, it will take too long to load them into a magazine thanks kevin for making this possible

@Tc_0104 Жыл бұрын

@@Monster-st8hb you could glue them

@atagosaviation Жыл бұрын

11:45 “sniper”shotgun

@Monster-st8hb 2 жыл бұрын

kevin, longer barrels do not help accuracy, well in a senario where you put oil in the barrel, then it would help the accuracy. when i built your amazing AWP SNIPER, the trigger broke which is a common mistake on using too much rubberbands second, the longer barrel also slowwwed the bullet speed down and at last what will happen is that the bullet would get stuck in the barrel third, t_h_e barrel also took the gun itself into 3 pieces

@PondeX 2 жыл бұрын

Kevin, well kevko, i have always admired you and your builds, you have been my inspiration for lego guns, keep it up and thank you!:)

@guentherjuergen7304 2 жыл бұрын

you can build a 5 stud long flight stable bullet with a axle to axle conn., a 4L axle and 3 half wide bushings in the front And this new mech is great. It makes it even simpler and more reliable while having a mag without a 'bullet lock'

@kevko183 2 жыл бұрын

Thanks! Do you think it will fly more straight? I´ll try

@guentherjuergen7304 2 жыл бұрын

@@kevko183 yes it works like an small arrow I think :D The axle connector is part no. 32039 btw.

@educationalpurposesmostly 2 жыл бұрын

@@guentherjuergen7304 I made one and 3D printed it. I linked it in the video somewhere in the comments

@guentherjuergen7304 2 жыл бұрын

@@educationalpurposesmostly nice, I'll check it out

@QuasiGaming-oi5jk 6 ай бұрын

you should've used a technic axle 1L with pin and a 1x1 liftarm thick for the not looking do good trigger

@Monster-st8hb 2 жыл бұрын

in a sulloution to fixing the aim of the gun, you can use a=nother bullet which is the connector that connects axels and stuff like lego miniguns (you may see them in some builds like @snyzer tech