What a great quick start tutorial to walk through the setup of the pedal. Just exactly the right amount of info to get someone going and not be frustrated with horrible tone.
@lightfootfx10 ай бұрын
Hey thanks so much for watching! Yeah that’s what I was hoping to achieve.
@KelsterVonShredster Жыл бұрын
That tone at the end was killer....wow.
@lightfootfx Жыл бұрын
Thanks so much!
@kevinlentz76048 ай бұрын
What a beauty,love that pedal board I just bought the Dream ,Love your review
@lightfootfx8 ай бұрын
Thank you so much! It’s such a good pedal.
@ChrisLoNgShAnK199011 ай бұрын
Goodness me those p90s are DIVINE! I'm in love
@franckrichard80772 жыл бұрын
I was lucky enough to find one during my vacations, since it seems to be out of stock in every european store until 2023.... the bad new is that I only have one Traveler guitar with me during vacation and I still have to wait 3 weeks before coming back home and try the thing myself !!!! but thanks for the great demo, I can't wait to plug a good strat in it !
@christianlacheze3323 Жыл бұрын
I’ve had the pedal for 6 months or so . I find it a tad trebly and it’s a bit a struggle to get a warm sound. Very good video!
@lightfootfx Жыл бұрын
Yeah I can hear that too, I seem to have to bring the treble down quite a bit on it. Thanks for watching!
@jroobz11 ай бұрын
Try the bright cap clip mod under the boost section. Works really well
@Kevinjames097611 ай бұрын
For some odd reason i feel like this pedal works best with fender strats or telecasters, jazz masters. I need to try to dial in my tones better with my Les Paul. Not saying it’s not designed for anything other than a fender just sounds better to my ears without much adjustments.
@lightfootfx11 ай бұрын
I do find humbuckers respond quite differently, usually takes more tweaking probably because of the usual higher output and compression of humbuckers compared to single coils. So there is something to that observation you shared.
@lcagold1 Жыл бұрын
Thanks for making this! I just picked one up for nights I don't feel like lugging my Fender 1x12 combo, but I was struggling to dial it in. I think this is just what I needed.
@lightfootfx Жыл бұрын
Awesome thanks for watching! I’m glad it helped
@ChrisJones-ht9zn Жыл бұрын
You have to spend time with this pedal to get the most out of it. Well worth it though because the tones are great. The Oxford sounds spot on to me.
@lightfootfx Жыл бұрын
Yeah that totally makes sense! I find that too
@rogerYT692 жыл бұрын
very cool video, thx! have the ruby and the dream 65 ...very helpful tips for dial in the pedals. both pedals are awesome in my opinion but the dream is absolutely incredible because it take pedals so well 😎😉
@lightfootfx2 жыл бұрын
Haha thankyou, yes it absolutely is a killer pedal. 🙂
@rogerYT692 жыл бұрын
@@lightfootfx glad you like the dream 😎 there are other great and good sounding modelers on the market like the helix etc. but with the uafx pedals i get a very tube like feeling I think. now I hope they do a marshall (e.g. JCM800 or plexi) 🙄
@lightfootfx2 жыл бұрын
@@rogerYT69 yeah I completely agree. I'm sure it's coming soon! That's gonna be sick if it does
@rogerYT692 жыл бұрын
@@lightfootfx yeah, i have read many comments that people would buy a plexi immediately ;) greetings from switzerland ;)
@isaacflores_official Жыл бұрын
Just ordered one! Thanks for this video man
@lightfootfx Жыл бұрын
Hey thanks for watching! Hope you enjoy it!
@michaelrosa2589 Жыл бұрын
Great demo good information just bought one and this has been very helpful! Thanks for the knowledge.
@daveryan21482 жыл бұрын
I was having some problems using the dream 65 with Apollo but didn't have the canvas in there. Will have to try it. Also having a hard time blasting it with humbuckers, lol.
@lightfootfx2 жыл бұрын
Oh yeah the canvas can help give it a volume bump, as far as blasting it with humbuckers I find it can get pretty heavy enough for what I play, almost anything except metal.
@theaaronimal2 жыл бұрын
Great review and tutorial! It helped me a lot! Thank you 🙏🏼
@lightfootfx2 жыл бұрын
I'm so glad it did thanks for watching 🙂
@Qmanolo9 ай бұрын
You are running all your wet effects in front of the Dream, or there´s something in the effects loop ? Great tone btw.
@lightfootfx9 ай бұрын
Hey thanks! I’m just running everything including wet effects into the front of the pedal.
@CatharticGuitar7 ай бұрын
I hope you do or did one of these for the new Lion 68.
@lightfootfx7 ай бұрын
It’s coming down the road hopefully soon.
@CatharticGuitar7 ай бұрын
Lightfoot, one question, why is the pedal set to the preset side? Does that mean all of the tweaks you are doing, you are doing to the factory preset, which has high gain?
@lightfootfx7 ай бұрын
Yeah that causes confusion, when I turn the pedal on it loads my last used saved preset that I created by default. So it was just loading my saved preset that I made and then I just reset it by moving all the knobs.
@spacelook9076 Жыл бұрын
Too bad Bluetooth doesn't work reliably.
@CatharticGuitar7 ай бұрын
There’s an update for the firmware that might help, but the problem is mine won’t connect to the desktop computer app correctly to get the update.
@CatharticGuitar7 ай бұрын
I just got one a few weeks ago. I couldn’t pass up the $319 Winter Holiday deal they were running.
@luis2arm8 ай бұрын
Hi! Nice video! I got a Dream65. I want to know if I can skip the Canvas Stereo (Line Isolator mode) and connect it directly to my interface as 'Line Level Input'. I read the Dream65 output is 500 Ohms, so it should go as 'Line Input' as far as I understood. I watched another video and they also connected it using XLR to a Apollo Twin. Why not use a TRS - TRS into the Apollo? Thanks for the video, it was really helpful!
@lightfootfx7 ай бұрын
Hey thanks for watching! The dream does not have balanced outputs from what I read meaning if you run a long connection from a stage to a sound board you would need a DI or Line isolator for the best results because this will convert the signal to balanced so that it can do long cables runs without interference or loss of audio quality. If you are going straight from the dream to your recording interface you can just use normal TS cables without needing a DI or line isolator because the distance is so short you wouldn’t notice any audio issues or interference. Hope that helps!
@christophertaylor1671 Жыл бұрын
Really awesome demo and explanation of all the features! Thanks for taking the time to put together such a detailed review. I sprung for the Simplifier DLX, but I am experiencing a bit of shopper's remorse. I play direct into XLR to the mixer at church so the XLR out and effects loop were a big draw. I just don't get the tone and dynamics that I was hoping for and what I hear in the UAFX Dream 65. Can you do a comparison between the two? I'm on the fence about listing the Simplifier DLX on Reverb and going for the Dream 65.
@lightfootfx Жыл бұрын
Thanks for watching, I actually used to have a simplifier dlx and I just couldn't jive with it I ended up switching from that to the iridium and was much happier. I now went to the dream and it's perfect, as good as it gets. I'll see if I can get my hands on another simplifier and do a comparison in the future.
@christophertaylor1671 Жыл бұрын
@@lightfootfx what's your application? I'm presently using the Simplifier DLX to FOH through the balanced audio out (XLR). I'm not getting in the sweet spot that I was hoping for. Maybe you can offer some insights if your application is the same. So many users are recording in a home studio and not playing live.
@michaelmcnamara9919 Жыл бұрын
So the Kilt sounded fantastic…and then you kicked in some delay? What did you add? Because it sounded fantastic!!!!!
@lightfootfx Жыл бұрын
Hey man thanks! I just kicked on the dd200 for delay the jet revelation v2 for reverb. Then I believe I switched the Kilt to the red setting for more gain.
@mossbackgeorgemusic Жыл бұрын
These videos are so much more helpful than many of the others I’ve seen. I was hoping you could tell me whether or not either the ruby or the dream actually exhibit any issues with pedals? I have quite a large board and I intend to run everything into the front end of one of the two pedals. So far I think I like the sound of The Ruby better, but I’m worried it’ll do something weird with pedals, as people seem to suspect that it will, and there aren’t many videos demonstrating it with pedals. I figure with the output volume being separate from the gain, I wouldn’t need to worry about headroom. If your experience is different please say so. I usually play an orange amp, so I figure British would be more in that ball park than American. Please let me know your thoughts if you could spare the time. Thanks for making these well thought out videos.
@lightfootfx Жыл бұрын
Hey man thanks for watching! I have used the iridium, Kemper, hx stuff, and the axe fx 3. This is on the same level as axe fx iii. The modeling is insane on these pedals they respond just as a real amp would with pedals. The biggest thing that impressed me is you can even use a boost pedal and it doesn’t digitally clip like I have experienced with other modelers. Yes if your a British guy I would go with the ruby. Just know you don’t need to turn the gain very high on it and that will give you plenty of headroom to push with your pedals.
@mossbackgeorgemusic Жыл бұрын
@@lightfootfx right on dude! Thank you for getting back to me. I’ve been having an insanely hard time with this decision.
@tendingtropic77782 жыл бұрын
Hi man! great video and pedalboard. I see you've tried both the dream and the ruby. I'm doubting between the two, mainly make ambient/textural music with a lot of pedals on my board too (mainly chase bliss and fairfield circuitry). Which of the two UAFX pedals would you recommend? dream or ruby? wich one 'takes pedals better'?
@lightfootfx2 жыл бұрын
Hey thanks! If you want the most headroom and like to do ambient stuff and run pretty clean I would go with the dream. It's also the more versatile pedal platform amp. The ruby runs out of headroom pretty quick
@tendingtropic77782 жыл бұрын
@@lightfootfx tnx! i thought the same!
@michele38802 жыл бұрын
Love it
@rocinblues Жыл бұрын
For this video you're going straight through a Di. Ok, have you tried this pedal through a solid state amp for live playing,, if yes... how are the results vs the Di?
@lightfootfx Жыл бұрын
Hey thanks for watching! I have not gone through a solid state amp, but it should work and imagine it would sound pretty true and accurate, similar to playing it through my studio monitors.
@thedirtyknobs Жыл бұрын
I wish there was a to asigne presets to both buttons
@lightfootfx Жыл бұрын
Yeah that would be an awesome feature to add, they may make it possible in a future update.
@Daved1526 Жыл бұрын
Great demo - do you run the Dream 65 last in your chain of pedals?
@lightfootfx Жыл бұрын
Thankyou! Yes I run it last after all my pedals.
@viktorshredguitar28 күн бұрын
When I recording With the dream 65, do i need to use linebox? Because I have the same us you. I did a recording without the linebox. But it sound different.
@lightfootfx27 күн бұрын
You don’t need a line isolator, you only need that for long runs like going from a stage to the soundboard.
@pabloelguera1161 Жыл бұрын
great video man
@lightfootfx Жыл бұрын
Thanks so much!
@cadelegat7 ай бұрын
Veritas guitars are pretty sick
@lightfootfx7 ай бұрын
Agreed!
@mikem668 Жыл бұрын
Nice video. Thanks.
@lightfootfx Жыл бұрын
Thanks for watching!
@millmoormichael66309 ай бұрын
Cheers! Just got the pedal, little confused, can I pair it direct to a speaker cab or does it need to be amplified somehow? Thanks!
@lightfootfx8 ай бұрын
Hey thanks for watching! I don’t think it will work with an actual amp speaker cab unless it’s getting amplified first somehow. It will work with an FRFR speaker though or through a recording interface or run it to the sound board with a DI box when playing a gig live and it will come out of the monitors in the house. Hope that helps!
@millmoormichael66308 ай бұрын
@@lightfootfx Thanks! I run it now through little Tascam actives, it sounds crazy
@lanceholland2 жыл бұрын
Can't the Dream plug directly into the audio interface or does your interface only have XLRs? I'm not sure what the Walrus box is for.
@lightfootfx2 жыл бұрын
Hey there! The only reason I run the canvas is so my board is xlr friendly. So when I play at a gig I can just plug right into 2 xlr cables that will send a balanced signal to the sound board since it will usually be a long run it will keep my signal from degrading since it's a balanced signal. You could use a DI in that instance as well but the canvas also won't drop decibels like a DI so it sends a full line level signal which just lets me be louder and have a lower noise floor. If you're in a bedroom or studio it's not necessary at all if it's within say 15 feet or so. I just use it in the video because that's just how I'm used to setting it up.
@lanceholland2 жыл бұрын
@@lightfootfx thanks for the helpful reply. Our band’s snake isn’t that long - I’m wondering if I could get away without it. Adding another 200+ pedal to a 400 UA Dream and it’s getting pricey. Too bad they didn’t build in balanced outputs like the Simplifier.
@lightfootfx2 жыл бұрын
@@lanceholland yeah right? I don't know why so many amp in a box pedals don't come with that feature.
@kyomaru72 жыл бұрын
@@lanceholland I think regardless you would want an line isolator or atleast a DI box to be safe from phantom power. Also, there is a difference between a line isolator and a DI Box. You won't lose your signal (your volume would remain loud) with a line isolator like the canvas or DISO+ and it'll give an excellent signal to FOH.
@blueufo9587 Жыл бұрын
Help anyone please. So I’m new to recording and I’m going from my dream 65 in to my volt 2 audio interface. My confusion is my levels. I can increase the gain on my interface into my daw or I can increase the level of output going out of the pedal into my interface. Which would should I be using? I wasn’t sure if there is a difference. Thank you for any help!
@lightfootfx Жыл бұрын
Hey there, this is a broad topic but general rule of thumb is if you can get the source to be the level you are wanting to record that is better than turning up the preamp of the device you are recording into. So I would start with turning the volt preamp down as low as it lets you go. Then adjust the dream 65 volume to the level at what your are wanting to record at. At that point if you need more slowly increase the preamp level until you hit the desired volume. I like to record right around where my sound it hitting hitting the yellow on the meters, usually around -9
@blueufo9587 Жыл бұрын
@@lightfootfx thank you!l
@jeremyversusjazz8 ай бұрын
Thnx had same question. Also i plugged mine into the hiz guitar input on the front of the apollo…is that bad? Whats the difference between the HiZ input on apollo the and the inputs on the back of the apollo when using the dream? And what does the canvas add?
@quiksilver782 жыл бұрын
I'm a noob into all this and I have been wrestling with the concept of the need for XLR or Balanced out when the UAFX pedal(s) is sitting a foot or two away from the Audio Interface. I think for that short of a distance an unbalanced instrument cable will be sufficient for this use case - what do you think? (btw, the background music at the beginning and end is a little too loud and is drowning out your speech)
@lightfootfx2 жыл бұрын
Yes you are correct, if your near the interface unbalanced is fine, I would only recommend the canvas for live situations where you need to run it to the sound board. Yeah I agree about the audio, I'm keeping it much lower in my newer videos
@nathanross40972 жыл бұрын
If you had to pick one, would it be the Ruby or the Dream?
@lightfootfx2 жыл бұрын
Oh man don't make me choose haha to be honest I am an ac30 guy so probably the ac30 however most people seem to like the dream more, it's definitely the more versatile pedal and easier to dial in I think.
@orryfishburne53262 жыл бұрын
I went with the Dream 65, and its the first modeler i have ever liked. Im impressed with it. Its sounds great. I would love to try the Ruby as well, but if someone was to choose only one or the other, it really just comes down to if you think you would prefer a Fender Deluxe Reverb or a Vox AC30. The Dream u get a good spring reverb, so thats another thing to consider, but if u have a dedicated reverb pedal that u love then u dont really need the spring reverb.
@quiksilver782 жыл бұрын
@@orryfishburne5326 I got both. You can't cheap out on tone 😄😄 jk
@matheusferreira.youtube Жыл бұрын
What pickups you have on that guitar? Sounds nice!
@lightfootfx Жыл бұрын
Thanks! Those are lindy fralin p90 pickups stock wound
@dan82dare Жыл бұрын
On the last demo are you using pedals for the drive or are you using the amp drive?
@lightfootfx Жыл бұрын
The dream is set to an edge of breakup so when I hit a chord harder it goes into minor overdrive, what you are hearing there is a mix of that and then the kilt overdrive I think pushing it over the edge more.
@GuitarBailey Жыл бұрын
Do I run these pedals in my chain directly into a guitar cab or effects loop of a current amp head? AS to not running through a interface or PA
@lightfootfx Жыл бұрын
Hi thanks for watching! They are meant to replace an amp so running them into an amp or effects loop will essentially change them into an overdrive pedal possibly. You can run them into an FRFR speaker which would act as an amp in the room if your looking for that sound.
@GuitarBailey Жыл бұрын
@@lightfootfx is that the recommendation is FRFR OR PA
@lightfootfx Жыл бұрын
@@GuitarBailey yes that is what I would recommend if your going to use one of these to replace an amp.
@wongsifu4259 күн бұрын
hi what guitar you are using ? nice
@lightfootfx8 күн бұрын
Hey, it’s called veritas mini master.
@wongsifu4257 күн бұрын
@@lightfootfx I have not heard about this brand . not available in Asia side .
@TheElrondo Жыл бұрын
Can anybody give me some help please. Can i use it in front of my clean tube amp? Or do i need a kind of PA amp with full range speakers? I'm old and not much into the emulation game. Thanks in advance and best wishes from Bavaria Germany 🇩🇪
@lightfootfx Жыл бұрын
Hey thanks for watching! You could technically run it in from of a clean amp but then it would be like using it as an overdrive. It’s real purpose is to be ran at the end of your pedal board into a sound board or interface this is so that it replaces the guitar amp for recording. For example live you can run it into a DI box and then run that XLR to the soundboard instead of micing an amp. If you recording at home just plug it straight into a audio interface
@richardcrews48632 жыл бұрын
You should try the light touch spring from Reverend in your Bigsbys
@lightfootfx2 жыл бұрын
Kewl! I'll check it out!
@gradedfilms57610 ай бұрын
Do i need a canvas stereo if i have audio interface like audient id14?
@lightfootfx10 ай бұрын
Hey great question, you do not. You can just use a patch cable to go out of the dream and into your interface. The only reason you would want something like the canvas is for long cable runs like going from a stage to a sound board across the room, this prevents cable noise and keeps a strong signal with long cable runs since it lets you use balanced XLR cables.
@julindres7 ай бұрын
Did you like the dream 65 more than the Woodrow? thanks!
@lightfootfx7 ай бұрын
I like the dream a bit more because it’s just quicker and easier to dial in, both have great tones though!
@julindres7 ай бұрын
@@lightfootfx thanks for the quick reply! The videos are super helpful
@coversjms Жыл бұрын
It is ok to connect it to the front of a real amp?
@lightfootfx Жыл бұрын
You could put it in front of a real amp, I just would start by having the output volume set really low and slowly bring it up so you don’t push the amp to hard. These pedals are really designed to replace an amp though.
@PachecoNicholas Жыл бұрын
👏🏽👏🏽👏🏽
@trentletzkus39282 жыл бұрын
what p90s are those
@lightfootfx2 жыл бұрын
Those are the lollar p90s standard winding
@vladislavolshevskiy3049 Жыл бұрын
Hi!!))) What is your signal chain?
@lightfootfx Жыл бұрын
Hey man, check out my pedalboard video, that one goes through my entire signal chain. The same chain I used in this video.
@vladislavolshevskiy3049 Жыл бұрын
@@lightfootfx thanks!!!))))🙂
@tendingtropic7778 Жыл бұрын
shouldnt the left light be lit too? seems like the pedal is bypassed?
@williamponton7005 Жыл бұрын
No the left switch is to use the knobs at their existing or 'live' settings, and the right foot switch is to engage a preset setting
@funfreq9282 Жыл бұрын
These are really nice sounding pedals but they are overpriced by quite a bit. @ $320 each by the time you get all the sounds you might need your in the FM9 territory and you would still need to buy effects. Great if your just going for one sound and a few effects.
@lightfootfx Жыл бұрын
Sure! That’s fair I think it depends on whether the buyer wants to use real pedals or an all in one like the fm9. For someone that really does not like modeling and doesn’t want to learn it, I think it’s a great product for ease of use if they had to get something and want top quality. Thanks for watching!
@evenstephen2000Ай бұрын
@@lightfootfx I personally prefer these pedals to the “all in one“ modelers. I was originally going to get a neural quad cortex - which is FANTASTIC - but ended up choosing these and I’m glad I did. Both are great, but I just wanted to go this route…which is a bit more focused with less amp choices, but still plenty of choices to dial-in almost any sound I could ever want. And they work so great with the rest of my pedal board.
@musik4life242 жыл бұрын
Can u run them into the poweramp of my tube qmp?
@lightfootfx2 жыл бұрын
To be honest I am not sure, you probably could but they may not have enough output for it.