How Is A Metal Tank Made ? / Giant Structures/ How Is Made

In this video you will see How Is A Metal Cement Tank Made . The metal tank made in this video is used to hold the cement. The way most tanks and even silos are built is the same, and by watching this video, you will get acquainted with the process of making them. In this video, there are different processes such as welding , painting, metal cutting and metal rolling, and also lifts and cranes are used.
#CementTank #MetalTank #MetalTanker #CementTanker #HowIsMade #Welding #Rollingmetal #Crane #GiantStructures
---------------------------------------------------------------------------------------------------------------------------
I hope you enjoy watching this video.
Do not forget to like and comment.
---------------------------------------------------------------------------------------------------------------------------
subscribe my channel :
kzbin.info/door/rVe...

[@scotchzulu6769]

RESPECT TO THESE SKILLED HARD WORKIING WORKERS.THEY MAKE THE WORLD ECONOMIES RUN SMOOTHLY.

[@user-yv9yz4ot8q]

Тяжело на такое смотреть, но стоит рабочим отдать должное, фактически в полевых условиях собирают

[@ottopartz1]

Considering the materials and tools available to them, they do a decent job.

[@raeefril6380]

Kreatif tapi dengan alat yang lebih lengkap mereka akan bisa lebih bagus lagi 👍

[@VinaX2R]

These guys are straight up hustlers!

[@miguelesquierosoviedo8272]

Me gustó mucho la manera de dominar las planchas

[@millwrightdad3753]

Been a journeyman millwright for over 17 years, probably made about 1,000+ holding tanks. Long long hot and cold hours

[@howismade981]

Yes, probably

[@diestrunzenstrunz4103]

He is more a sizzler than a welder

[@HelmetHam]

A dab here a dab there

[@matiascristiani9407]

Que buen trabajo, felicitaciones!

[@toorajmansoori9084]

ماشالا تانکرسازان، این حرفه خانوادگی من است ، خودم ، بردرانم ، پدر ، عمو ، عموزاده ها

[@mehrnaz6984]

Amazing

[@anatoliyzhestov3915]

- fast, cheap, quality - choose any two items. - of course fast and cheap.

[@pitmaster4860]

?

[@anatoliyzhestov3915]

​@@pitmaster4860 what? quality of welding - missed. cleaning surface before painting - missed. pecision at big hammer level. cheap and fast.

[@squad5339]

i have one jack 3.43... its very easy to use and very2 limited...i love it...

[@alexandereynier]

Y solo con un trabajador 😎👌

[@vrod1a]

Hard skilled work 👍

[@marcuscicero9587]

the first time I used a chainfall was 5 months ago to lift a 500 lb. smoker onto its cart. amazing tool with a work saving ratio of 32:1. so for each lb. of force you pull down on the chain with, the chainfall lifts or lowers 32 lb.

[@JTwelder.]

They really are awesome!

[@lambendower5535]

Nice skill & job

[@user-to4jk4pj1y]

Молодцы

[@zzz13zzz17]

Welder with good skills and bad tools. Painting over rust is bad. No any links inside tank, it can collapse.

[@tosh4461]

Na that welding was dog crap, they pulse it with their hand, can cause porosity and other shit you don’t want

[@zagan1]

You don't need bracing inside.

[@Aquadus214]

Very nice! Backyard making of nuclear warhead!

[@mikeiver]

The guy clearly has one size stick and it to big to not burn and blow won't the joint. Could you imagine how much faster and better the results if he had a decent MIG welder? I never cease to be amazed at the work these guys get done with the most basic of tools and outright skill. Of course we don't see the horror of a chain comealong letting loose or any myriad of other dangers these guys tempt on the job. People are expendable, profits are not I guess.

[@MarcosSilva-jt3jz]

al fin entiendo de donde saca sus cohetes y satélites la NASA!!!!

[@SnowTiger45]

Pretty Crude Work.

[@franciscovaleriano3153]

Thanks a lot guy... for showing how is made a tank. Thank you. From México

[@dikdikjakaria]

Good job

[@hanifnishad9425]

Good job with out sources

[@NAFxStudio]

Hi Sir, im from Malaysia. I saw from the video from minute 3.27 to 4.30, you are using wrapping technique for the shell plate to form round shape. May i know from your experience, what is the maximum thickness of shell plate in order to do that rather than rolling.. is 6mm mild steel plate possible to do this technique.

[@howismade981]

Hi my friend, the thickness of the tanker in this video is about three millimeters and the sheet is stretch (soft alloy). Sheet thickness of 6 mm can also be done with this method, but the diameter of the tanker must be increased .In fact, for larger thicknesses, the diameter of the tanker should be increased .

[@NAFxStudio]

@@howismade981 oh i see.. may i know what is the minimum diameter for 6mm to use this.. currently our diameter is 2500mm and max 2600mm. Can it be done?

[@mikethecripple]

@@NAFxStudio i have done this with 6 and 8mm 316 stainless steel. We used coiled material which worked really well

[@zagan1]

Depends on what pressure the tank needs. This tank looks to be gravity output so no pressure, but if a tank is 2 bar then you are looking at 4mm thick minimum, higher pressure requires 8mm plate but that's around 8 to 10 bar.

[@miguelfillueul4872]

buen trabajo pero no sé qué pintura será tendrían que sacar un poco lo oxidado antes de pintar

[@josephamuzu8372]

Hmn...had always dreamt and wish to work in companies like this ...got the talent but no support...it is well .

[@vanchienpham1664]

👍👍👍

[@Bayat-d10ma]

روش کارتون بسیار خوب، درست و کاربردیه، از دید من شما میتونید که جوشکاریتون رو هم بهتر و با کیفیت تر انجام بدین که ظاهر کار و جوشکاریها هم زیباتر باشه هر چند شاید این کار شما نیازی نداشته باشه و خواسته شما رو بر آورده کنه، من خودم هم جوشکارم و اینو میدونم که جوشکاری کار سخت و یک هنر است، با سپاس از شما دوست گرامی

[@howismade981]

ممنون از شما و کامنت خوبتون

[@arkadislavkin6812]

За что держаться, когда залезешь наверх, чтобы снять замок и открыть крышку?

[@arkadislavkin6812]

Лестница очень близко к корпусу, нет места удобно поставить ногу.

[@user-pu2zp2ke2l]

Good luck with that SMAW welding

[@valsteve2000]

Why did you overcoat the tank with paint without sandblasting, to leave a rust free surface which is the proper procedure.

[@howismade981]

Because sand blasting has a high cost and that this tank is for storing cement and rust is not very important. This paint that they applied is also an oil paint and to some extent it prevents rust.

[@valsteve2000]

@@howismade981 I worked in the rig before and thats the procedure in painting metallic structure whether its just a platform or tanks for holding chemicals, anyway thats your companys's business, i only pinpoint what i noticed of the flaws of your method. You know even in the house using oiI or water based paint on metallic surfaces without cleaning properly, will create paint blisters from that spot when theres a change in temperature and also humidity contributes to it when moisture get trapped in between . I dont mean any harm , its just an opinion. Good luck to you and your works.

[@howismade981]

@@valsteve2000 Yes, my friend, your opinion is correct, despite the painting, there is a possibility of rust, but it is not common for sandblasting in this company to make tanks. In any case, thank you for your comment

[@valsteve2000]

@@howismade981 Welcome my friend.We are here to exchange ideas. More power to your company's business. Honestly, it's the first time I've seen how these tanks are made.

[@BudiSantoso-hl4bf]

Yea.. the rust will continue to grow under the paint. there's no benefit to being painted other than just giving color

[@javasteel8700]

Oke

[@bobmoran2007]

پرچم ایران بالاست 👌

[@betol6136]

I wonder how many leaks is gonna have

[@tosh4461]

Yes 😂

[@hlmc00]

none is for cement and not liquids

[@pedroseribelli2256]

faltou um branco piscina por dentro p/ conservar.

[@user-mx2jd9bv9m]

А говарят , один вроде в поле не воин ,но мужик доказал обратное .

[@goodwords7753]

What country are these skilled from?

[@howismade981]

Iran

[@badmusrasheed5844]

Which country is this

[@ederangelo21]

It tank hold cement ? What is save ?

[@howismade981]

yes

[@gayanindikap]

I didn't understand why you apply paint on rust . Because it's eat steel speed than normal. Unless you may clean it using wire brush before painting. That's normal process.

[@howismade981]

You are right, but this tank is for storing cement and rust is not important. Brushing is not easy for this large tank and should be sandblasted, but it is expensive

[@ColKorn1965]

Made by "Tanks-R-Us"

[@sinayekkalar7368]

This tank will be used as cement storage

[@tengkusulaiman]

How is made

[@darrensamuels1511]

As a Boilermaker welder this looks as poor as get rough as guts.

[@cobre7717]

To an ant it looks mighty and invincible. Perspective is that what you have seen with your own experiences.

[@mikhailravin6796]

Хорошая работа , уровень колхоза .

[@user-pf6et2tu5w]

Во во там электродом варят давно уж полуавтоматами

[@user-fv4qk2mi2b]

@@user-pf6et2tu5w помойму не одна их бочка не держит сыт. Мне то все равно чем варитт мма или миг ео как они варят похабно не знаю что там на выходе у них. Хуйня полная помойму

[@user-pf6et2tu5w]

@@user-fv4qk2mi2b можно вопрос вот я варю трубки на экскаваторе вариться хорошо без проблем купил штуцера магазинные варю к ним трубки и не хрена не вариться шлак шов говно что за херня не подскажите

[@user-fv4qk2mi2b]

@@user-pf6et2tu5w так тут по подробнее штуцер по твоему резьба и с ней трубка завальцована под резьбу. Ну как говориться огрвзок. Магнитом пооверь как магнитится

[@user-pf6et2tu5w]

@@user-fv4qk2mi2b они оцинкованные это может влиять и если то что делать счищать цинк болгаркой

[@BOCAHMBOLANG1]

Jos

[@maxgray5113]

Wow.....🤣

[@aghasamiei]

پرچم بچه های کاروانسرای سنگی و در جهان بالا بردید👍

[@uvl77]

2:18 директор решил показать мастер класс работягам, на камеру ))))

[@TheSuspensio]

Размяться захотел ))

[@user-sv5sx8kq2k]

Внутрь бандаж не надо?

[@gromoff565]

Это для пшеницы наверно? И кстати покажите этот видео тех в офисе сидит и нойет наши работа очень трудно

[@howismade981]

Не мой друг. Для хранения цемента

[@joshuajuarez3471]

It will hold grain

[@CLoZe14]

The name of the channel says it all

[@workethic7463]

That's hilarious

[@mohammad45h]

سلام سپاس تشکر وهزاران 👍...👍.....استاد محترم لطف کنین نوع ترانس جوش را معرفی نمایید وضخامت ورق تانک ممنون

[@Bayat-d10ma]

ترانس جوش هر دستگاهی که بشه باهاش جوشکاری کرد و ضخامت ورق هم ۳

[@duniaproyekbaratama1287]

what zise plate steel

[@howismade981]

The diameter is four millimeters

[@lycan5570]

Spot welded structures.

[@mouseseye6332]

🌹🌹

[@emmanuel.edens.9057]

Wow can I be a friend

[@user-dm5dy5vf6g]

اريد افضل دهان دخل خزان صهريج حديد من ت اكل وصداء

[@vertigo8715]

Beat to fit, paint to match... Welding you say? More like random melting.

[@Sassenhaim]

That's stick welding for dummies alright 🤣👍🏻

[@WisnuIksanudin]

@@Sassenhaim0

[@WisnuIksanudin]

@@Sassenhaim 0

[@WisnuIksanudin]

@@Sassenhaim 00

[@Mjerkcheeze]

Lowgrade steel cant do that with ssj 355, witch most of the modern world builds with today.

[@zagan1]

Looks to be corten steel. which is standard

[@Mjerkcheeze]

@@zagan1 Corten is ssj355 "Weathering" its the same it just makes its own oxide layer (rust) and u dont paint that.

[@user-br3jq1yn3d]

Дешево и сердито. Главное свою функцию выполняет. Бывают разные времена и к ним соответствуют разные подходы к работе. Раз уж это производят, значит это пользуется спросом. Был бы я предпринимателем и была бы нужда в таких ёмкостях, то я бы купил бы не задумываясь, главное чтобы эта ёмкость выполняла свои функции. А если ты серьезная фирма, то может быть и заказывал бы ёмкость машинного исполнения. Хотя я знаю что ёмкости для нефти таким же способом и такими же технологиями собираются. Они слишком большие, чтобы сделать их на заводе, а потом привезти например на месторождение. Привозят рулоны, раскатывают, стягивают и варят.

[@user-ip1oj7xr3v]

Это Мексика?

[@howismade981]

Нет это иран

[@allaroundchannel9947]

WOOOW NICE VERRY GOOD SIR I LIKE IT SUPPORT YOU SIR AND I THANK TO WATCHING MY VIDEO SIR TAKE CARE

[@user-lo7ik4ps4t]

Зайчиков нахватался, я.

[@MarcosSilva-jt3jz]

en 2 meses todo oxidado

[@khanabdulrehman3913]

Is this Iran brother

[@howismade981]

yes

[@rudytilo3515]

Wrong procedure my friend please check API standard on how the proper procedure for tank fabrication to avoid zero accident

[@Alabamaweldinginspector]

These guys don’t know what a code book is you boob ! They don’t know what welding procedures are either . What a bunch of crap !

[@marioforceramic3457]

هذا عملأ جید في ایران

[@SskFamilyVlogs]

I am a contractor in india I want welder fitter if anyone interested then reply me

[@ansarsayed8412]

For what use it is made

[@howismade981]

To store cement

[@thenussbaum44]

no problem we'll just paint right over that rust.

[@buddtwin2]

Fuck that would take so long spraying with a 3-4 inch fan widths

[@crazymtbrider]

The crows must think there's grain in the silo you can see where they're pecking at your arc welds😉

[@lycan5570]

Should have sand blasted that rust off first

[@danzamini4513]

Hard and an amazing work, but I wouldn’t use the tank. No thanks 🙏 Btw! Which country is it?

[@ImranAhmad-vm1ep]

Finishing is not good

[@mahidudy4037]

this is iran not expect more than this 🤷‍♂️

[@jwandahousefullofwickednes3605]

What a mess .safety hazard

[@user-pz8qr1gt5e]

Не впечатлило вот бы лебедка оторвалась эт да

[@jeromeb5929]

And this where we store our plutonium in pakistani or russian accent

[@africanelectron751]

I could not do better with better tools...if this guy had a mig welder imagine what he could do.

[@crossbow3539]

He’s using what any good welder would use You can’t use a mig welder outside in the wind

[@diurio1341]

@@crossbow3539 as√

[@valdirrett8571]

Errado como foi trabalhado

[@weejohnbb]

@@crossbow3539 if you use flux core wire you can.

[@small-china]

советским союзом пахнуло, времен 90х. все оттуда - держак, резак, техника сварки )))

[@mikhailravin6796]

Держак был из трех арматурин

[@small-china]

@@mikhailravin6796 это в колхозе. а в нормальных конторах нормальные держаки были

[@vanthaonguyen8702]

No

[@CiscoRedstar]

rough as fuck

[@johnriggenbach2999]

HOW IT'S MADE...not HOW IS MADE

[@mikealext]

Maybe in a thirdworld country with no standards.

[@toorajmansoori9084]

deta duger som vilket tanker som helst . jag är svetsare och smeed

[@mikealext]

Good enough is not acceptable. Why the third world is the third world.

[@mongomoko2322]

At least it is cheap. Nothing else.

[@shahradshoja]

Made in Iran 👌

[@user-ub2ip2rl7e]

это руские делают,их метод!

[@user-im5br2gp3b]

Нет это великие казахи делают

[@user-ub2ip2rl7e]

@@user-im5br2gp3b спасибо за комплимент,но мы покупаем у европы,х..ню не лепим!!!😂

[@muratkocak0640]

Sen bu siloyu kac gunde yaptin . Amelelikten baska bi sey degil Turkiyede 2.5 gunde bi silo bitiriyorlar 100 tonluk. Hidrolik silindirde yapsana eziyet resmen bu

[@howismade981]

Bu tankın yapımı uzun sürmez ve düzenli olarak yapılırsa üç dört gün sürer.

[@SergioHernandez-fz8vq]

Están echos a puro huevo pobre espalda

[@maxpenrose9094]

Horrible welder

[@erfansoorani3083]

واقعا حیف این ادمای با استعدادی که تو یه همچبن مملکتی کار کنن با این امکانات

[@muhammedkuttyponnadan4048]

Notperfectwork

[@tyjohnson7327]

well thats one shit way to do it

[@workethic7463]

Imagine showing up to buy this pile of shit.

[@darcymcnabb9259]

In my country this is garbage and would not sell ....nobody would buy it . In your 3rd world country this passes but not in a 1st world country. But for a primitive people and primitive build nice job .

[@africanelectron751]

These guys won't even notice the collapse of society.

[@dre5973]

no shitt

[@ronron7763]

if you were born there, you would have been happy customer of this tank at affordable price. Everything have context. BTW, what '1st world country' you got popped out?

[@Kokkigaming]

@@ronron7763 Big man, these welds wouldnt even be certified for Holding a damn Towel here in the rest of the world aka EXC1. So I dont see how anybody would put Their life on the Line to climb a long as frick lader tacked on with electrode. Let alone the fact they paint over the rust. Sorry to tell ya but the rust keeps growing under the paint until the thin sheetmetal colapses. The only positive thing in this video is i have to give these guys credit for is how to they are welding 3mm steel with an electrode without bruning through. But That must be because half the thing Is tacked together and not welded.

[@aminroshdieh9549]

I'm quite sure you don't even know what is this tank so close your mouth and keep your brilliant ideas for your first world.