Amazing Manufacturing process of Motorcycle Fuel Tank With minimal tools

See How Motorcycle Fuel Tank Making in Factory || Manufacturing Motorcycle Fuel Tank
#manufacturing
#manufacturingbiketank
#howtomakebikefueltank

[@michaelpotter9345]

Amazing skills, I was a sheetmetal worker for 46 years, I can appreciate what these guys are doing, I’m also in awe that these guys still have toes eyes and fingers,

[@geoffreyveale7715]

The powered cutting wheels at 4:20 are particularly scary.

[@Beals007]

I'm sure when one of them gets injured. They just can him and hire another one to take his place.😢😢😢

[@vincesteward8798]

I was 37 years sheet metal worker and I did shop fabrication and yeah kind of crazy wearing sandals 😂 my boss would have sent me home if I showed up in sandals! Definitely appreciated seeing how well the tanks turned out. How about those bench snips at the beginning with the extension handles. I’m guessing this is in India…definitely no osha guidelines

[@yawarkhan7844]

​@@vincesteward8798 Pakistan not India

[@trentson6965]

They practice their safety precautionary measure before they embarking on such delicate metalworks processing operations.

[@JombieMann]

Thank goodness that everyone is wearing their safety flip flops.

[@haraldpettersen3649]

JombieMann - They have to pay for all the safety equipment themselves, a pair of safety shoes costs a month's salary.

[@bilbobaggins3389]

AND I WOULD PUT MONEY ON THE FACT AN INJURY IS RARE IF NOT NEVER. because they haven't been dimmed down by the nanny state run school board types..

[@gianlucamatarazzo8704]

@@haraldpettersen3649 Yes, but apair of hands or feet are priceless. Only two available, no spare body parts.

[@Johndeerehdi]

And dresses😊

[@voodooutt]

Safety Sandals are all the rage

[@stubrakon9683]

Dire conditions. Children at work. No h&s. Red hot. These hard working people deserve more. Thanks for posting 🤘

[@nickaxe771]

Different world.....best we mind our own business.....

[@stayathome316]

They should join a union. Lol.

[@nickaxe771]

@@stayathome316 Unions.....thats why nothing is made in the UK anymore....UNIONS SQUEEZED THE LIFE OF OF so many great UK companies....Look what happened to our motor cycles....Fords British Leyland.....and so on and so on....remember Red Robbo. Then Scargill killed off our coal mines......made em to costly.....cheaper to import from the other side of the world says it all.

[@daled8221]

Are you saying OSHA wouldn't approve of their safety shoes?

[@justintime1307]

Health and safety is an absolute piss take these days. People that have never stepped foot on a building site dreaming up legislation that everyone on a building site should stick to. The new lunacy for you. My brother is a lecturer in Painting & Decorating. Some extremely silly person has dreamt up that UK apprentices can no longer ask for a pole (Decorating pole) on a contract while on building sites. This is apparently offensive to Polish people (who also ask for a pole) Instead these poor teenage lads have to go and ask a grown man on a site if they can use their shaft. What tosser thought this one up?? I honestly wish I could say its a joke

[@Roman-bg8zb]

Respect for these hard-working people!

[@q8463]

Love the final couple of belts with a pipe to the underside to correct a slight clearance/ manufacturing issue.

[@epostiljon]

When I was 11-12 years old, I was fooling around with friends, having fun, getting home for dinner, then play more.. I hope it goes well for this kids later on in life

[@HarryShagnasty-sc9zd]

And going to school, learning things and adding to the overall progress of your country. Pakistan in the meantime …

[@epostiljon]

@@HarryShagnasty-sc9zd makes me even more sad when I look around and see how the kids in my country, some not even aware of the privilege they have..

[@meade916]

i like how the guy with the sliced up knee is sitting one out taking a break while the guy who is about to slice his knee cuts the next sheet. lol. These guys are great!

[@trvman1]

and did you notice those steel toed workers shoes they are wearing.

[@indioargento]

no está cortado, se ponen trapos para no cortarse, pero te puedo asegurar que todos se cortan, sobre todo los que andan con ojotas

[@FrustratedBaboon]

All the professional manufacturers and safety engineers are watching and commenting on KZbin. You what they say when you assume right @meade916 ?

[@meade916]

@@FrustratedBaboon are you drunk? put down the bottle and go to bed. Put the crack pipe down too while you are at it. You guys say the most random stuff I swear.

[@user-vg5nq4zl7g]

Подумай над тем, что ты написал. Чтобы ты в этой жизни сделал, чтобы не оказаться в следующей этим парнем с порезанным коленом.

[@schrodingerscat1863]

Apart from the lack of safety gear this is very similar to the process you would have seen anywhere in the west back in the 1960's before production lines and specialised mechanisation became common.

[@darknes7800]

Maybe at the Harley Davidson plant !!! But not at Kawasaki ! LOL

[@manuelr.s6328]

@@darknes7800hahaha true

[@mikesantos011]

1860’s maybe

[@pkerit308]

Ever heard of Henry Ford and the assembly line? Americans were NOT doing this in the 1960s

[@schrodingerscat1863]

@@pkerit308 Not talking about huge production lines like ford, most motorbikes were built in much smaller volumes using a lot less mechanisation.

[@jvmauricio107]

Shout out to that one dude who doesn throw the tank on the floor.

[@summerforever6736]

Agree lol He is smarter

[@cumonmaaannn8067]

Notice the dent in the finished product the kid is holding at the end. 🙄

[@sek295]

@@cumonmaaannn8067 Not pretty sure about that but did you notice the last sound quality inspection with a stick at the end...

[@DiCoopola]

That's pretty amazing hand work but I got to say if they were a tiny bit more careful the finished product would be 100% as opposed to near 100%.

[@dinkydaz6711]

Bet the dink department are on continual overtime

[@beyondmiddleagedman7240]

And here are our workers showing the utmost care in the handling of our product from start to finish.

[@tannerlane9669]

Coming from a person who can’t slash doesn’t know how to make anything

[@ratboyjersey]

The important thing is to throw the tank on the ground before and after each step in the process.

[@mjk9833]

@@ratboyjersey 😂😂

[@KeanuOR]

You get paid 5 Dollars a day doing this and see if you care.

[@marcbecker9554]

@@ratboyjersey if it’s not thrown to the ground the future tank haven’t learned anything! Think it’s part of payback from the happy workers.

[@sannyassi73]

Loving that Child Labor! And the Sandals while working around sharp stuff! Reminds me of when we used to gut houses down to the frame and do complete remodels, all the while I worked bare foot- other people somehow messed up their feet and stepped on nails wearing shoes while I never got a foot injury, it becomes second nature to not step on things. They all thought I was crazy but I never got hurt! Mad respect for these People, I hope they're being paid well!

[@jonredd650]

Kids in this country could use a little hard labor

[@brucesherborne408]

Love the steel caps and safety glasses 😂 also love the stress relief method and pressure test of those spot welds. So that’s why the Royal Enfield is cheap

[@demagchevy]

I love how the guy takes some dings out of the tank wirh a hammer, and than throws it, lol! 6:01

[@glenturney4750]

It's ALL about 'attitude'. That guy must hate his job. If he cared, he'd have been gentle with placing those parts on the floor without creating more dings in the metal.

[@tiswhatitis137]

This isn't for any top brand bikes lol. Probably just for the little dinger bikes they have everywhere India or wherever this is

[@beardoallin657]

Haha.

[@franktechmaniac7488]

Nobody told him to take care avoiding new dents.

[@amalkumar2775]

​@@tiswhatitis137 Why most of the comments under such videos believe it is india? In fact, not a single factory functioning like this can be found in the automobile sector in India. This is video from some other country.

[@markmillar535]

This had me totally engrosed! Great skills then they virtually throw the tank on the gound! Love it!

[@bobbarron6969]

The number of steps in this process is mind boggling. It's a terribly inefficient, and dangerous, process by modern standards, but appears to be providing employment to any number of men and boys. It looks like a rugged way to make a living but I'd wager that many families feel the benefit.

[@olbricky6824]

All gen Z's should have to mandatory watch 100 hours of this stuff in high school so they can see what a working man looks like

[@matilotelephones3557]

OK boomer, show them dangerous work in unsafe conditions by minors. Very good idea. That will teach them.

[@bodeaciprian78]

Amin to that

[@lanzywoodrow7386]

Especilly the 10 year olds like work here.

[@redtobertshateshandles]

They might get traumatised and sue the taxpayer..

[@ojosazules8828]

Their attention levels couldn't deal with 100 mins let alone 100 hours, they'd demand a 45 second TikTok version😉

[@Kevscancave]

I cut my toes at least 10 times watching this! Pretty busy place for sure!

[@ggwagee]

Me too😢

[@glennhamnett627]

Pair steel cap boots would be good bloody hell😂

[@Kevscancave]

@@glennhamnett627 Would be a great idea! 👍😎👍

[@xhefriguitars7946]

If this were in the US there would be so many violations, they would not be able to operate. The West just can't compete with this kind of work force. These people known how to do hard work, and can manufacture something from seemingly simple raw materials. Hats off to them!!!

[@henrytheeight]

These poor chaps have no safety glasses or steel toed shoes yet they seem to be able to work without injury. They work like machines.

[@grady6272]

Did you see the guy with his leg wrapped in bandages at the beginning? I’m guessing that there are a lot of accidents at this factory!

[@scoutrifle6827]

I loved seeing that one guy hammer out the tiny dings and then contemptuously throw the blank on the stone floor from 5' away. :)

[@williemty]

😂😂😂😂 I agree

[@BigUriel]

Have you seen how people drive there? It'll be dented by the end of its first day on the road anyway, they don't care about dents.

[@ethiop_frum]

Все люди, работающие руками и головой, прекрасны!

[@user-py5ml6wy6c]

Только не на дядю!..

[@user-gq7yd6xv2t]

Бак из фольги

[@ethiop_frum]

@@user-gq7yd6xv2t толщина такой фольги 1-1.5 мм

[@user-qf1by6yk3u]

Это буквально рабство за копейки. в итоге такой бак по себе стоимости 1-2 рубля выходит. а его продадут тысяч за 10+. вот и думай какая РАБотающие Рабы.

[@richardleonheart3912]

@@user-gq7yd6xv2t 🤣🤝😁

[@deldridg]

These guys have saved a fortune on safety gear. Great that the kiddies can have a go too!

[@markmcculloch2570]

Well put

[@richardspahn1320]

I hope that was sarcasm on your part.

[@deldridg]

@@richardspahn1320 Indeed it was. I can only imagine the horrendous injuries some of these folk get.

[@iAM2AM]

Damn, I didn't know Amazon Manufacturing and Distribution had a live stream. 😯

[@juancarlosmartinmorcillo9012]

Aquí tenéis a gente trabajadora , ocupada en tener una vida tanto como para no cuestionarse si son géneros fluidos . Que envidia de sociedad

[@starshipgus8578]

Great job you guys and amazing skill,I worked in a machine shop like this when I was young and the process was similar,that’s why I can appreciate your labor.👍

[@arnoldn2017]

You also worked there as a child?

[@trvman1]

We don't have any child labor, he is just very short and really young looking :)

[@ALIENMACHINES]

That was engineering therapy seeing it go from a steel sheet to a finished tank, amazing skills

[@brianheppell4506]

i would have sacked in Coventry after the first 5 minutes working like that , loved the metal finishing at the end with the iron bar ;)

[@Aero-id3nw]

Sacked cos the union rep. said you were working too hard and showing everyone else up 😂

[@DeadRoman]

He was testing the bracket welds by jarring the tank with the iron bar.

[@ostrich67]

Not in the 1970s mate

[@xtalvt]

This is interesting (as are all your videos) from several points. I am an "old time" machinist. The first CNC I saw was still a paper punch type. All the machines I learned on were manual. All my "home machines" are old manual units. I love to see how much can be done with a old fashion manual tools. That said, for us in the USA (I am originally from Canada) it is easy to see why we can not make make money manufacturing. If OSHA walked in to a plant like this, it would be shut down instantly. Safety boots ... safety glasses .... light curtains to prevent you from putting your hands into the equipment ... Even things like unrolling the coil .. here this would have been done with a machine onto a table so you don't need to bend over. Look at the open welding of the edge ... and the welding of the spigot with the minimal shield ... I wonder how much there are are being paid? Do you think they have health insurance if they get injured on the job. Funny you don't see many older workers. I think Americans need to watch things like this and understand that if they buy off shore items, you are causing good safe American jobs (with benefits like paid vacation and retirement plans) to go away. Sure you same money but realize where the parts are coming from. Is i worth you saving a few dollars on your motorcycle to hurt the American economy?

[@ghostface1818]

You have a valid point but you’re also leaving out the fact US union workers steal hours from corporations. The the very few make up for the laziness of many.

[@angelo_giachetti]

When I lose an arm at work I wont buy a motorcycle so I prefer what we have in the US. Pay more but we keep more limbs.

[@xtalvt]

@@ghostface1818 Unions are good and bad. I completely agree ... people need to be productive. If you are not, you should be fired and not have the union cover up for you. That said, without collective bargaining, you would not have the safety regulations, high wages and benefits the US workers have. I have been on both sides of this argument, owning my own shop at one time and also working for a factory where I was forced to join the union. The best place I worked was in a shop where the owners respected and took good care of the workers who in return did a good job for the company. Unfortunately, this is seldom the case. In many cases, this only happens when the workers either partly or completely own the company.

[@lounisbenadjaoud4299]

any American product too expensive for poor people, no American or interesting parts on the market too expensive. so it's interesting that these poor people contribute to making tools for motorcycles, cars, machines cheaper and which will be used by poor people who can buy. what makes the american economy remains for the rich people america manufactures for america and not for the international market

[@xtalvt]

@gae but if you ship all your manufacturing to other "cheaper" countries then you become a country who only offers services. All your jobs are providing services for others. That is the end of your economy. I have witnessed this. I grew up in a "steel town" ... Selco, Inco, Union Caribide, John Deere, tube mill, .... all in my little town. Now they are gone ... along with the good jobs. Everyone wanted to make more and pay less. They should have been willing to pay a bit more for that motorcycle and keep their jobs. In my mind, I don't want to bring our workers down but bring the other workers of the world up. In my "perfect" economy, there would be a "world tariff system". Countries that pay their workers a living wage ... provide health care ... have good safety records ...for these countries there would be no tariff. I think maybe counties like Sweden might be here. Then you get countries like the USA ... good pay ... decent safety ... lousy health care (well great if you can afford it) .. they would have a small tariff. Then you get countries like China .. poor wages ... dumping pollution into the water and sky .... a very high tariff. At this point all items would cost about the same no matter where they came from. You would buy because of quality and features rather than buying the cheapest ... usually at the expense of the workers.

[@Wombat-blue]

I love the section that carefully hammers out all the dents and bumps that the tanks develop from being thrown around…and right after he throws them into a pile again. Ruthless efficiency.

[@jeronimomurruni]

I know right? one would guess that after carefully removing all the dents the tank would see a better treatment but no, to the gravel floor it goes again.

[@hector4330]

Yo it's not a developing country for nothing

[@directory-of-sound]

it's really nice to see how things were made in the 1910's-1920's.

[@F2DG_Diesel]

In England.

[@johnasdoe3699]

Why only in the 1910-1920s? Almost such a style of work was common in European factories before the Second World War and even shortly after it.

[@jamesmatheson5115]

Yeah and we can still see it in India today.

[@johnasdoe3699]

@@jamesmatheson5115 And you shall see such working stile back in Russia soon :-)

[@jamesmatheson5115]

@@johnasdoe3699 It probably is and has always been that way in Russia, who said Russia was an advanced technological country.

[@rolffeucht1942]

Das ist Umformtechnik in Perfektion, und erst die schutzkleidung!

[@Zanehoward88]

The little boy at the end has a job at every factory in the country. He’s in every video

[@imac786]

Maybe he is part of video making team just a thought

[@TKOrace]

They all looks the same. Sandals, dirty skin and pretty dresses

[@olddirtsurfer]

He's the GM

[@imac786]

@@olddirtsurfer wow these kids really are way ahead of kids in other countries.

[@tiswhatitis137]

Lol

[@lukewise1227]

I always love the WorkCover approved safety flip-flops, fingerless gloves and safety glasses, worn around razor sharp sheet metal by these guys. I guess if your older colleagues are missing a few toes and fingertips it would be good motivation to concentrate on what you are doing.

[@CecilDSouza]

Unfortunately, in a poor country like Pakistan, the owner will not provide the safety boots or goggles. Workers hardly get paid a pittance. So, you have no clue about other countries and you make stupid statements.

[@nicksomingenhar]

And don't forget the most sad part, minors working without safety equipment

[@franklinhart2056]

You do know they are not European?

[@lukewise1227]

@@franklinhart2056 Shirley you must be joking?

[@winnipegvlogs4494]

You guys only know to complain….. the workers in this video are far more skilled than workers around you who just go by the book and have no fucking clue to what needs to be done without proper equipment. The workers here are genuinely experienced and can make precise products without proper equipment. So better take your complaining and fun making ass somewhere else……

[@MrSebfrench76]

Ca commence super fort avec un gamin de 8 ans qui presente des reservoirs. Rouler en RE, quelle classe !

[@komoru]

Fascinating process. Great focus on all the workers. Notice not a single person on their cell phones.

[@greenidguy9292]

Or with actual shoes…

[@komoru]

@@greenidguy9292 Definitely would not pass an OSHA inspection....but then again, I don't think OSHA or child labor laws apply here!

[@tomrogers9467]

Back in the days before the “table” was invented!

[@carlduchesne713]

teerible

[@ZerokillerOppel1]

🤣🤣🤣🤣Literally EVERYTHING always ends up being tossed on the floor in all these Pakistani sweat shop films here on YT....

[@alext8828]

or the chair.

[@tomrogers9467]

@@alext8828 And we both forgot the broom and shovel!

[@kingcosworth2643]

There is a distinct lack of table technology in all these videos.

[@mikecallan8346]

Quality control at it's finest.

[@alsnow30]

yeah I am sure very few leak......LOL

[@papalevies]

Well they have the water tank leak test at the end

[@koopasayer5999]

Not bad looks like 100 % water tested

[@andreyb.2131]

Какие красивые у всех прически! Люди следят за собой в любой ситуации!

[@pauldmann1166]

I’d be interested to know which brand of motorcycle these are intended for.

[@SimiPair]

Royal Enfield?

[@derekblake9385]

I love the way they tack great care not to damage 😂

[@alext8828]

Hahaha

[@mark-]

yer the child at the end was showing one with the dent on it.

[@wasidaneyal8169]

Hlo

[@drk321]

They also don't cry to their union boss when they get a hangnail.

[@IRONHORSE427RACING]

Very cool. Their safety practices leave room for improvement but, for what they have to work with they turn out an amazing tank. I have built several fuel tanks for Drag Racing Cars over the years and it takes me a day or 2 working non stop to turn out 1 tank.....shoot these guys have it down to no wasted energy and everybody pitches in. Very Cool. Thanks for the video it shows if you want to bad enough....you can find a way! I would have zero issues buying a tank they made.

[@giuseppegalotta5240]

Cifra club aula musicale bbasso

[@davidreynolds4684]

You think that's bad check out the video of the guy sitting on his are legs spread wide chopping up lead acid batteries sitting in his crotch while wearing his osha approved pj's and steel toed flip flops. He's got three fingers on one hand 4 on the other two teeth in his head and they're dying of loneliness. But boy can that summsbitch rebuild a battery. I'm pretty sure that's not leprosy just acid burns where his junk used to be.

[@EricOveson]

@@terricklee6268 their total disregard for safety and proper ergonomics here is shocking!

[@lucian9274]

"room for improvement", bro they dont exist xd

[@davidreynolds4684]

@@lucian9274 can you imagine what these talented guys could do with up to date equipment? Hell they are making most of the shoes over there. You'd think someone would throw em a bone and hook em up with some Kaepas or some thing. You may not be familiar with those but the leather was so thick on em it was like wearing steel plated tennis shoes. Wear em all day and you get home and find out you lost 4 lbs in your feet alone. Like a steam bath in there.

[@woodworks3585]

I will actually be surprised if any of these hold fuel for long. Looks exactly the same tank I had on my foreign bike that leaked like a siv after 6 months. They replaced the tank 3 times. In the end I just used a tank off a Honda and that sorted it out.. Got rid of the bike after a year as bits kept falling off.

[@aluisiosilva9585]

Só faltam equipamentos básicos de segurança, porque disposição para trabalhar eles tem, Parabéns. 👍

[@westerncivilization]

Nice to see how Detroit accomplishes such things. Keep up the good work!

[@glenturney4750]

And the way they use their bedsheets as clothing. They just go home and fall right onto bed, then get up and wear it to work. 😁👍

[@HeyJoe1978]

Best comment award!

[@georgesheffield1580]

Would like to see the rest of the motorcycle manufacturing that these tanks go onto .

[@keesdrullman6588]

Tjonge, wat werd daar snel gewerkt zeg. In record-tempo werden de tanks gemaakt door veel handige handen en nog wat pers-, snij- en las-apparatuur. Amazing !

[@robinwells8879]

Such craft. How long I would last is up for debate. My finger count would change daily 😂. Much respect. ❤

[@kiereluurs1243]

Amazing that while most of the work seems just ESTIMATED (apart from the molds), it apparently still seems good enough to FIT on a bike.

[@filipthealucard]

looks estimated but there are stops to guide it plus on 1000 made in a day if 10 are missed no one cares

[@deldridg]

You mean to fit it on an Indian bike - probably not made with the finest tolerances.

[@amalkumar2775]

​@@deldridg Why most of the comments under such videos believe it is india? In fact, not a single factory functioning like this can be found in the automobile sector in India. This is video from some other country.

[@freddynews6478]

Love all the safety glasses and steel toe shoes, they make them look like feet even.

[@alext8828]

No hearing protection for anyone?? That's not good. What'd ya say????

[@alsnow30]

yes noticed when the cut off excess around it those machines have NO guards nothing... I wonder how many have lost fingers

[@garykeenan3724]

You missed the painted toe nails

[@patty109109]

@@alsnow30 those machines are certainly the most dangerous in there

[@kc6653]

What about the 10 year old carrying the billet tanks around? Not sure I want my 10 year old working there

[@rwgallup]

OSHA would have a field day. Everyone is wearing sandals. I'm sure they are steel toed sandals. I love the QC guy with the stick banging the tanks at the very end.

[@sosume5]

Squating harms the body. They could greatly improve production by working on countertops.

[@RosaBeha]

The chain tensioner at 10:38 is really impressive. And I've always wondered why my replacement tank took a lot of coaxing to fit on the bike. ;-)

[@troykane]

Because it's made by Children WTF

[@erikdeeNOSPELLSNO]

Such casual disregard. If you were making just ONE of these, it would be far, far different. Ore maybe ten or twenty- each one would be a signature unique object of skill and love. Not something to throw around. But TBF, these guys are probably only earning about 10 cents per tank!

[@Hdhdjdudh-fv5jk]

Jesus loves you all

[@erikdeeNOSPELLSNO]

We'd be in Big trouble if He didn't,@@Hdhdjdudh-fv5jk.

[@TheTruthSeeker756]

I love watching people make an honest living making stuff. God bless!

[@sonnylatchstring]

And please God, let them keep all their fingers and toes in the process

[@priestking369]

Nice to know where the tank on your Harley comes from.

[@marcoceraso3420]

Complimenti a questi lavoratori.....e al ragazzino... spero che vengano pagati bene vedendo la situazione interna...

[@HardSarge]

Minimal tools is an understatement!

[@BMW3.0CS]

That's exactly what I came here to say

[@robc.5745]

That dude cutting the sheet metal is wearing flip-flops, Whew,. India ?

[@toro5338]

Same thought of mine 😄😁😆

[@NaeemAhmed-nb4if]

@@robc.5745 Pakistan

[@walterbrown8694]

An important indicator of a very successful operation - They each have 10 fingers and toes, no bandages, no fresh blood from wounds, and no OSHA. Reminds me of my first job in the Glass Factory in Chicago Heights in 1953.

[@sellier-bellot22]

Those were the days !!! LOL😃😃😃

[@steverefer]

They have child care too.

[@JombieMann]

Maybe those people were given the afternoon off when they filmed this.

[@Kris5344]

I’m sure they have very solid safety training program to. “Boy don’t stick your fingers there”. Much more efficient than mandatory 8h pre employment training in US.

[@alext8828]

@@Kris5344 That is exactly right.

[@slipperydick123]

@6.18 I love the way the chap taps the imperfections out ,then chucks it on the floor 😂😂

[@wou7er]

The level of craftsmanship shown in these videos is amazing. Weather it is Pakistani, Afghan of Indian craftsmen they always earn too little for their level of skill….. respect 🫡

[@Tug8541]

SAFETY FIRST !!! Nothing but the finest safety gear for these guy's. Some of the nicest steel toe boots and glasses I've ever seen. Their so careful with the product as their making them. From start to finished leaking tank, quality control. No wonder tanks, oil pans, fenders, etc... NEVER fit correctly.

[@spidos1000]

Nice to see the kids are helping out.

[@tomrogers9467]

All 9!

[@rajkunmarvikeyrajkunmarvik8515]

Been ym

[@jessestreet2549]

If the gop has it's way you'll see a lot more of that. A whole lot more.

[@poohbuttlilboy4316]

@@jessestreet2549 the what?

[@jessestreet2549]

@@poohbuttlilboy4316 republicans want to legalize child labor.

[@yousufjan4427]

پیٹرول ٹینک کی مینو فیکچرنگ دیکھ کر دل بہت خوش ھوا ھے اللہ پاک انھیں مذید کامیابی عطا فرماٸیں آمییییین 🌹 👍👍

[@robf3902]

Minimal tools… Yeah, the majority of us have these heavy presses, specialized cutting tables and presses, spot welders, arc welders .. it’s pretty minimal LOL You don’t find any less “tools” then in a modern plant that is more automated

[@paulroberts3639]

Imagine how much easier it would be if they put the items on trolleys to move around rather than carrying and throwing them to the ground.

[@johnesmer5635]

When I was a kid in Australia I used to help my dad at work cuting grass.. It's good to see a kid learning things so in the future he can support he's family.. In Australia 80+% of population basically are usles

[@lukewise1227]

That's not true, 80% of people know how to buy lattes, use a smart phone, send a text or check their Facebook profile one handed while driving, whinge on social media they are not paid what they are worth, while demanding 6 figure salaries to do what was once considered an entry level occupation, believe success comes before work in the dictionary and Lisa Wilkinson and Whaleed Ali actually know what they are talking about.

[@stephentyas4698]

I think the only minimalist thing there was not having a guillotine to cut the sheet and using tin snips instead.

[@richardschofield2201]

You don't have a forming press in your garage?

[@stephentyas4698]

@@richardschofield2201 how right you are.

[@rottendrestantje]

Don't forget the very minimalist approach to savety

[@isthislive464]

Some of the workers are minimal in age

[@hanskonrad5850]

Exactly. Click bait here

[@RobTyrer]

You can't tell me no one thought to use the scraps and cut offs to fabricate some kind of guard for the multitude of open chains and belts...

[@artyfhartie2269]

It's so much easier to watch people work in the comfort of the couch

[@shawnmay8073]

I pray everyone that watches understands how blessed we are. Most watch this and see an old way of making things we take for granted. How many think about who or how your gas tank was made the whole video I seen the guy with his feet wrapped and the kid packing tank parts I bet that kid makes less per week then some pay for "a" coffee

[@zefautino]

So?

[@iliketowatch.]

Very true. The worker's rights we have in the developed world weren't handed to us; men had to organize, fight and die for the protections we enjoy today. Two men striking for better working conditions were shot dead by the police in my city of San Francisco in 1934. Their names were Howard Sperry and Nick Bordoise.

[@duellingscarguevara]

@@zefautino you are an entitled nothing is what.

[@uburutv]

This is really impressive. Thanks for taking your time to show details on how the motorcycle fuel tanks are manufactured. It's thrilling and requires a lot of manual labor. Bravo!

[@user-mb4tm1di4z]

And that sheet metal is sharp. Amazing

[@lalva5798]

WOW! No eye protection or PPE with the exception of gloves. I think they’re paid based on numbers produced. A different world for sure

[@hybevhybev677]

The guy running this place is making a fortune. Now I know why the one I bought needed so much re-work.

[@alext8828]

The two young boys are using machines to sequentially process the tanks after which the second boy drops his tank into a pile of other tanks, thereby banging it up a bit, no doubt. Then the tanks go to a man who taps out the small imperfections with a hammer. When this is done, he throws his tank onto the floor with a bunch of other tanks, thereby banging the shit outta all the tanks that much more. Tanks for the memories.

[@marcusjahnke9287]

And why you and me didn’t have to pay more than a 100 bucks. And guess where 90 of those go? At least not to these guys, nor the shop owner. I will treat my 60 dollar slightly dented tank with some more respect when I fill in the little dents, sand it and paint it, now that I’ve seen this.

[@FrankBenlin]

I'm guessing 16 hour days in at least 110 degree F ( 43.3 C) heat.

[@aussie6639]

What brand bike ?

[@ostrich67]

@@aussie6639 Royal Enfield is my guess.

[@user-hj5rt5wn2x]

Дай бог им здоровья, особенно рад всему мальчик. Вы молодцы.

[@user-ue8ik3cm6e]

Радип, как думаешь, это Индийцы, или Пакистанцы?

[@user-hj5rt5wn2x]

@@user-ue8ik3cm6e я не знаю.

[@user-iq8wi5mr2e]

@@user-ue8ik3cm6e Хороший вопрос. Особенно владея индийским мотоциклом... Но дальний поход в 7000км показал высокую надежность техники!

[@AndreyLaran]

@@user-ue8ik3cm6e А есть существенная разница?

[@user-ue8ik3cm6e]

@@AndreyLaran кому как, для тебя наверное все туземцы одинаковые.

[@jice56420]

It's evident that workers safety is their priority here !!! 🤣

[@ironhorsehero1988]

I loved the guy tapping dents out with a planishing hammer then throwing the tank to the next process 😂

[@austineight996]

These men are getting things done from operation to operation and putting a product on the market as efficiently as they can with the tools at their disposal. Nothing but respect for these people working hard for a living. Not spoiled little brats like those who leave negative and dementing comments here. Thank you for sharing this great video!

[@Orgelfan62]

This People are proud Workers

[@MOMO-sp2vs]

¹¹¹¹est est 1

[@austineight996]

@@Orgelfan62 Yes for sure! I wish more people took would take more pride in their craft/profession like these men obviously demonstrate.

[@Orgelfan62]

@@austineight996 i am Electrician and i make my Job with Pleasure

[@iliketowatch.]

Perhaps you'd like to work there, too? No, I didn't think so. They edited out the parts where a guy gets his finger cut off and gets replaced by someone new.

[@exceptx]

Community work! He's already creating jobs for the repair shops in the City...

[@c103110a]

Definitely a non-union shop. These folks are working!

[@Jinxed007]

Is there any way to make this work environment less safe? Maybe open cases of dynamite near the welding station?

[@netstarr7758]

Gotta love how they do everything on the ground and not on a bench like the rest of the world

[@lutzvonpeter9170]

Hmm, it is probably the other way around. The few industrialized countries do it on benches, the rest of the world does it that way...

[@fatboyrowing]

I hope everyone can still count to ten! Mad respect for the hard work these men are performing.

[@fatboyrowing]

@@supersaiyanwaltgeta1866 that “kid” is more man than most adult males.

[@micinvit]

...on their fingers? 😉😊

[@daudabuhana7375]

Why ten? Because it’s the average age of the workforce?

[@boxer71c55]

My hat is off to these men! Harsh working environment. They are busting their asses and getting it done. Great job!

[@tonimuhlbauer6576]

Warum schmeißen die Arbeiter immer die fertige Teile lieblos auf den Boden? 🤷

[@namenotavailable11]

Funny watching the guy banging out the dents and then throws it on to the concrete floor. Lol

[@user-vk3ud7lt8n]

لن تظهر أي عيوب لاحقا ؛ حيث أن المنتج سيتم تلميعه بالصنفرة ومعجون الطلاء!

[@walshy2116]

I didn't realize there were enough cycles being made to warrant a 24/7 factory to be pumping out tanks at that volume. Amazing really.

[@tommyconner1467]

countries like the Philippines and Japan and china, motorcycles are a way of life. Bikes in those countries are everywhere. Yes bikes are all over the world,

[@tommyconner1467]

There's more than a billion bikes in the world

[@jayakumarkaarikuzhy4713]

I guess that the video is related to small factories in Pakistan.

[@atifrana5470]

In Pakistan where the factory is people use motorcycle

[@Californians_go_home]

I have a company employing 3 people to steal all cycle fuel tanks and turn them into football helmets. I do this just to keep these people employed.

[@lusiscus]

Amazing to watch but seeing kids working is a little gut wrenching although he seemed happy and proud.

[@user-sf5uw2vu3m]

This is masters craftsmanship-work, i think.

[@kennethtucker9844]

And global Britain is supposed to compete in the market place with this. Maybe we can if Rees Mogg has his way...

[@saberiooo]

Какое бережное отношение к заготовкам🤣!

[@DonWiti-fe8lu]

а у этой нации ко всему такое отношение, временщики, нет ничего и терять нечего.

[@evgenymusanov2970]

Не был ты на наших заводах.Иной раз из такого ржавого г.вна дорогостоящий заказ делают,что просто ужас.Еб....я то работяги,а не начальство.А тут сразу видно что без претензий,поскольку про точность изготовления речи не идет.Основные параметры выдержаны и ладно.Баки я так понимаю для индийских ройял-энфильдов делают.Которые сами от 50х годов недалеко ушли.

[@saberiooo]

@@evgenymusanov2970 Уаз буханка 100% собирают также)

[@les2599]

@@saberiooo улыбнуло🤝🏻

[@evgenymusanov2970]

@@saberiooo А ты денег дай на новое оборудование,зарплату .И глядишь вместо древней(но не плохой)конструкции появится что-то новое.Тем более что уаз,как к нему не относись в деревне вещь нужная.А красота там без надобности.

[@phreedm1]

As a sheet metal worker I noticed everyone is wearing sandals while working with incredibly sharp metal.... YIKES. No wonder there's someone sitting down with their knee wrapped. Nevertheless... amazing video.

[@Armoris6247]

Man that much sheet metal and flip-flops has my toes curling with every step he takes. 😅

[@tocarules]

Imagine the fines if that operation were discovered here? Even better, imagine our safety inspectors being shipped there? I heard they found one when they had to re dig up the road.

[@kingcosworth2643]

It's good and bad I guess, staff safety is important, but at the same time cost of product becomes prohibitive and the system eventually destroys the manufacturing sector, just like what has happened throughout the West.

[@nigelscott1922]

That sheet must be wafer thin by the time they’ve done 😂

[@umraosingh3709]

26 gauge?

[@SteveFrenchWoodNStuff]

It started out water thin and only got worse from there.

[@sentiersdubonheur]

Hello, Very beautiful to see men working but very dangereous how many hands, feet and etc cut for making a bike finally jf

[@thra5herxb12s]

I have to say that I bought one of these tanks in the UK from an Indian based ebay trader and it's better than one I could make myself and 2 years on it still doesn't leak. Better still, it was only £30 with a cap and tap including fed ex shipping.

[@mitsos306ify]

Love the safety shoes!

[@aussiejosh312]

The way they throw the tanks around, they will all come with a factory relic job.

[@NunyaPeru]

"Just throw them on the floor. It's not going on my bike." Now you know why after market never fits right.

[@andynightingale7335]

I worked in a factory making furniture where all the processes were similar, standing at a machine for hours doing the same thing day after day. Teaches you good work ethic and you become quicker & quicker without realising it.

[@yohoho2012]

ты раб