Рет қаралды 36,522
How much lift can Vortec's truly take without machining? This video has lots of info if you're wanting to set up your Vortec heads on a low budget using stock retainers and valves.
This video is a guide, you must check your heads for proper clearance!
"Drop in" Springs (check specs to insure fitment) ID Min .870 - OD 1.240 to 1.265 - Installed height
1.700" (up to 1.750 if you use offset keepers) * Rocker arms clearance needs to be checked*
Heres a Few options
-Comp cams 980-16 or 981-16
-Howards 98214
-Elgin 943XK
Felpro valve seals : SS72861 www.amazon.com/Fel-Pro-SS7286...
Don't Forget to like and Subscribe
Add me on Instagram @ cutter_performance