So, if I understand this all... Your timing is now off throughout the rev range just so it spits a little when bouncing off the limiter. Your ICV has a permanent position allowing unmetered air into the intake when not idling. And you cranked up the throttle cable to bring the idle RPM back up, didn't adjust the TPS so your ECU is never seeing idle, all after inducing a constant lean condition. Anyone else here talking about messing with the AFM... don't. Unless you have proper calibration equipment to measure the exhaust gasses.
@anthonyulloa40042 жыл бұрын
Bro that’s crazy 😂🔥
@fi3rrooo2 жыл бұрын
its amazing tbh 😂
@reagan22692 жыл бұрын
what you should do for the idle control valve is use a penny and drill a hole in it that is the right size so that the car idles at around 800rpm WHILE THE THROTTLE BODY IS CLOSED. Then you can have the full operation of the throttle body and have proper idle. Also if you choose to stick with this configuration, be sure to adjust the throttle position sensor on the throttle body so that it clicks just as you press the gas pedal or pull the cable.
@fi3rrooo2 жыл бұрын
its kinda the same thing as jb weld i jb welded it shut and drilled a tiny hole
@reagan22692 жыл бұрын
@@fi3rrooo oh i missed the bit where you drilled a hole in it, my bad. Still though it should be able to idle with a fully closed throttle body using only air through that hole.
@fi3rrooo2 жыл бұрын
@@reagan2269 all good brotha i thought about that to maybe a good idea for next time ill give it a try
@reagan22692 жыл бұрын
@@fi3rrooo ive messed with my intake for far too long and pondered every angle because it is probably the rarest part of this car. None of the 2002s that had m10s used this intake so there are pretty much no resources whatsoever online for it.
@haanfarhan3717 Жыл бұрын
why my limit is 4.5k rpm
@danyaaldollie7850 Жыл бұрын
bro Im Young Exactly like you and wanna do dumb shit lol😆 Same Car just in Mtech2
@nooneknowswhy2 жыл бұрын
Do you have an m10 motor?
@fi3rrooo2 жыл бұрын
yea its m10
@asheelsingh578610 ай бұрын
Amazing bro... can be done on m50b25?
@fi3rrooo10 ай бұрын
Can be done on any car brotha just gotta find a way to do it anything is possible
@asheelsingh578610 ай бұрын
Its m50b25 non vanos coil pack
@potatojake1972 жыл бұрын
2 step? Nah that's just straight limiter xD sounds good tho
@fi3rrooo2 жыл бұрын
if you adjust the timing right you can make it really pop and shoot flames
@potatojake1972 жыл бұрын
@@fi3rrooo Seems like it
@nooneknowswhy2 жыл бұрын
Potato Jake that is 2 stepping
@zacrl1230 Жыл бұрын
@@nooneknowswhy It is doing it at 6500rpm, that's the redline. Two steps are generally set lower than the redline. #TheMoreYouKnow
@jjby70799 ай бұрын
Does it tuck up you’re car in anyway ?
@fi3rrooo9 ай бұрын
Ehh 😂 wouldn’t recommend to abuse your car but sure is cool and fun
@daninordin2 жыл бұрын
how about m40b18?
@fi3rrooo2 жыл бұрын
you can honestly mess with the mass airflow sensor to run rich and turn down timing a little
@daninordin2 жыл бұрын
will try it,but how to make it run it rich?adjust counter clock wise or anti clock wise
@fi3rrooo2 жыл бұрын
@@daninordin ima make a tutorial how to run rich this week to explain how im able to shopt flames
@daninordin2 жыл бұрын
@@fi3rrooo yeaah,thanks!!will wait for the video
@fi3rrooo2 жыл бұрын
no problem man if you want go ahead and shoot a follow on my IG @fierro_e30