How To 2008 to 2013 Nissan Rogue Serpentine Belt Replacement

Hi guys and welcome to another episode
if you have any questions please let as know
amzn.to/2MjZuun GoPro Hero 5
Gratitude www.paypal.me/...
Thanks for watching and don't forget to Subscribe.
------------------------------------FOLLOW ME---------------------------
Follow me on Instagram
@bulletsolano36
Follow me on Twitter
@bulletsolano
Like my Facebook page
/ luis.b.solano.3
Thanks for watching.
Disclaimer.
This video contains tips and recommendations only.
Bullet Solano Shall not be liable for any harm, injury damage or if anything bad happens to your vehicle or property got in the process of repair and replacement due to use or misinterpretation of the information on this video.
Keep in mind that if you buy low quality auto parts does not guarantee the adequate level of road safety.

[@deadgame9980]

5 years later-Thanks buddy 👊🏻👍🏻

[@aclarkgraphics]

Yo, man. This video helped me out today and I was able to fix my wife's Rogue. Thanks!!

[@magin2014]

Nice video it's actually easier installing the belt from top to bottom '.excellent info

[@oliviawhitis1160]

jay ruisanchez can you explain how?

[@squiresmusic]

watched this and was able to change mine out today. my wife think a little bit more of me now. 👍🏻

[@Yenstler]

great video. great explanation. Had never changed a serpentine belt before and this video made it easy.

[@ralphcampbell7590]

I was thinking the same

[@michellemckenzie8491]

Awesome video! Thank you so much. I was successful in the changing of this intimidating belt!

[@bubbabee1475]

Thanks bro excellent video..short and straight to the point 👍

[@BulletSolano]

Thanks bro

[@bsvJuice]

Thanks for this video bro. I am doing this repair on the wifes car tonight!

[@BulletSolano]

Thanks

[@gregstauffer8922]

Great video. Other than fitting the belt in that narrow space it's a pretty easy job!

[@daniellopez782]

Wow that looks super easy will definitely try it

[@joeyjenks2971]

Thank you so much I didn't know the fender wells had to be removed , now that I know I don't have to figure it out .

[@BulletSolano]

No problem

[@ryanthacker5629]

THANK YOU FOR THIS EXTREMELY GREAT & HELPFUL VIDEO!!! Dude I’m a diy guy mainly because I grew up with parents like that and I enjoy being a man who’s able to figure things new out & work on my own cars & house although I’m definitely not a carpenter! If you happen to see this comment please know that I’m truly great full that awesome guys like yourself take time to help show us novelist how to repair a job when money is tight!!

[@BulletSolano]

No problem man, I’m glad this helped you

[@dennycrane4261]

Buen video bro, facil, bien explicado y a lo que ibas.....asi se explican las cosas

[@Onlyforsongsthatarentonspotify]

Thank you so much. You are incredibly helpful

[@BulletSolano]

No problem

[@albino4015]

Good video on this subject, too bad is not on the idler pulley right above the tensioner . Have you ever dealt with the idler pulley? I've tried to find any information on it ,can't find any thing related to the idler pulley. If any of you you tubers know any thing on it , please let me know. I haven't had a chance to study the steps, but it looks kind of tough.If any one knows ,do you need to drop the engine or raise it, to get to the bolt, Or can you access it thru those holes on the wall?Just give some hint on this .Thanks.

[@v.m.7228]

Any reply? I need to do same thing, did you figure it out? Help...Thanks

[@abel3619]

My friends Nissan rogue is being driven off of a skinner drivebelt than it needs. Courtesy of previous owner. You can see the belt doesn’t cover the entire width of any of the pullies. People don’t think before they do things. They just do em.

[@MrHateley]

Great help...many thanks from the UK

[@BulletSolano]

Thanks

[@chicoman000]

Thank you

[@russ432]

Excellent video. Very informative. Thanks!

[@kennlang1521]

Awesome, clear video. Thanks!

[@denospyridon3126]

Thank u is very helpful for my 2016 Nissan Rogue I believe the engines are the same from 2014 to 2018

[@denos.2688]

Much better demonstration

[@brianmarlowe8799]

Excellent!!!!! 5Stars!!!!

[@kirkgarfield6965]

all looks good except the jerking of the tensioner while loosing the belt, it is a good sign that the tensioner is bad.

[@pablod555]

A los cuantos kms hay que cambiar??

[@75lt31]

Hi, great video! I have a question if you or anyone else could help I’d greatly appreciate it. Do you need to use a specific tool for the tensioner or can you just use a regular wrench? Thanks

[@BulletSolano]

Minute 1:28 14MM socket with a wretched for the tensioner

[@yadikassa8995]

You can also rent a special tool specific for this job from AutoZone

[@abel3619]

This was one of the harder belts I’ve had to do. This is why I stick to Hondas

[@almightyp97]

I swear Honda is so much more easier and done without removing the damn wheel 🤦🏽‍♂️ I’m still fighting to get this belt on 😂

[@abel3619]

@@almightyp97 took me like an hour and I typically get em done in ten minutes

[@sujoyb8733]

Never put your fingers in between the belt and a pulley. In case the ratchet slips, your fingers will be gone. Also never spin the tensioner the wrong way or else you must replace it.

[@thebigdrakos]

Great job, Thank you

[@BulletSolano]

Thanks

[@rjb9027]

When I put the Timing belt , is there any marks on the belt I should pay attention to it when fixing

[@BulletSolano]

Yes All you need to be concerned about is the marks on the timing belt and the dots on the cam and crank sprockets.

[@ericjdommer]

Very helpful TY.

[@SwissplWatches]

Awesome, thank you

[@BulletSolano]

No problem

[@aerumz9840]

Thank you for the video very informative how often do you think that should be replaced as far as miles?

[@BulletSolano]

Inspected every 75K to 100K miles

[@aerumz9840]

@@BulletSolano I'm at 73000, gonna change it, thanks

[@thomashughes9361]

Good info, Good video!

[@BulletSolano]

Thanks

[@assembler779]

Hi. Great video. How many kilometers did you change the belt?

[@BulletSolano]

Hello, don’t know, this is a customer’s car, you should replace it every 90K miles

[@emiliosimmons2378]

very good

[@michaelpribble1913]

Thanks bud. Very helpful

[@BulletSolano]

No problem

[@jorgecepeda1259]

Nice video can you please advise me what can be causing the squeaking noise coming from the alternator after installation of the new belt? Thanks

[@BulletSolano]

Thanks, alternator pulley is going bad

[@MultisportOfficial]

@@BulletSolano That doesn't make sense. Why was it NOT squeaking before changing the belt? I have the same issue with mine, and it's clear the belt is loose. Shouldn't there be a way to adjust the tension?

[@witnesszer0]

@@MultisportOfficial belt tensioner is going bad

[@pollydor07]

Gracias

[@elvinsimon5008]

thank you sr.... very nice job.

[@BulletSolano]

No problem, thanks

[@conroynaistus9220]

Thank champ!!

[@HHIVR4]

You should change the tensioner too.

[@BulletSolano]

Customer’s car, she barely afford the belt

[@Simon-zz3iz]

Thanks bud.

[@dak6811]

Awesome video thank you

[@BulletSolano]

Thanks

[@johnbecker8768]

Thanks!

[@lookiloo100]

did you use a 1/2 or 3/8in ratchet/ i tried a 1/2in and didn"t have room

[@BulletSolano]

3/8

[@polbeltran901]

La rougue 2009 trae banda de distribución o cadena de distribución

[@BulletSolano]

Cadena

[@JesusGodHolySpirit3]

What is the Diagram for 2016 Nissan Rogue serpentine belt?

[@BulletSolano]

www.nissanpartsplus.com/oem-parts/nissan-serpentine-belt-117204ba0a

[@josearango8838]

I liking, but I don’t see, how tense de belt

[@BulletSolano]

Minute 1:56! Tensioner

[@nanayawetiakoh9579]

My belt completely broke whiles driving and now I can’t find the exact belt to replace it , mine is a Nissan Rogue 2009 2.5L SL

[@BulletSolano]

amzn.to/3jmTmUj

[@ryanbutalid9693]

How come mine wont fit?. I got right belt. Hard to put it on

[@BulletSolano]

Check your tensioner, maybe is bad

[@ryanbutalid9693]

@@BulletSolano did you get your belt from nissan or aftermarket manufacture? I got bando 6pk1805. Its kinda short

[@BulletSolano]

I get mine from where I work Autozone

[@paulo.8085]

Hi. What is the torque spec for the tensioner or how tight does the belt need to be? I think I have a cricket tensioner tool to measure deflection.

[@BulletSolano]

Hello, Tensioner is spring loaded

[@ArturoGarzaID]

Did this and it didn’t work the belt keeps jumping off when I start the car. It jumps off the back pulley

[@BulletSolano]

Make sure you belt is in the correct way, if that’s not the problem probably just pulley is bad

[@ArturoGarzaID]

@@BulletSolano Hi, thanks for the response. I recently found out that there had been work done on the vehicle where they installed a new ac compressor, after inspection the pulleys appear to be out of alignment. I think the ac compressor they put in is not the correct one. I will be changing it out with the correct one and I'll post my update.

[@de-graftebenezer4128]

Please may I know the size or number of the belt

[@BulletSolano]

customer's car, check on autozone or any other auto parts store

[@craigcervino2447]

Really cant stand the fact everytime something on rogue has to be done it involves taking wheel and inner covers off used a off brand belt after doing a new ac compressor man that belt screamed had to donit all over to put the oem belt on but good video

[@natehands7625]

What bet you use

[@BulletSolano]

Belt? Don’t remember! I think the customer got it from Autozone

[@oliviawhitis1160]

You didn’t show how to try and maneuver the belt onto the alternator that’s the difficult part I’m having , because it is not budging but it’s the right belt for the car.

[@BulletSolano]

Sorry about that, just get someone to help you pushing on the tensione

[@devonscope6222]

Not enough slack on the belt when I try, even with the tensioner all the way back. Its the right belt. Anyone else have this problem amd solved it?

[@BulletSolano]

New belt? Did you compare the two?

[@devonscope6222]

@@BulletSolano thanks for the quick reply. I struggled but I ended up getting it on. The tensioner wasnt pulling back far enough at first but when I tried it a bit later it gave me (barely) enough slack to slip it on.

[@BulletSolano]

Cool

[@abel3619]

@@devonscope6222 same for me. It was a b*tch

[@victoriasalvant5629]

🙂👍

[@rootloggins3951]

The dam engineers that design this crap could have gave us 2 more inches room all the way around the entire motor. But hell naw let's build it so you have to take the world apart to change something.

[@DM-hw4cr]

Stick with nissan oem belt.

[@BulletSolano]

Customer get that

[@mrg4318]

👍👍👍👍👍👍👍🍺😎

[@ramtrucks721]

THANK YOU!

[@wesamsalem762]

very good .