How to Replace Serpentine Belt Tensioner 2008-2013 Nissan Rogue

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@oa5275]

Finally I've found a video that shows how to remove the damn idler pulley! Even the service manual is not much help. Thanks for the tip of lowering the engine to access the idler pulley bolt. I would love to see more details and tips on changing idler pulley and what to take in consideration as some OEM idler pulleys have different internal shapes even though the belt grooves and diameters are the same.

[@user-dn2kk5xq7c]

Fantastic! Our belt came off, & I thought I'd just have to put it back on (which worried me, since why did it come off in the 1st place?). Once I opened up the wheel well, my belt tension pulley was sitting loose in there, with a sheared mounting bolt which led to a broken mount. Suddenly a much bigger job, but with the help of this video, got it all done. I never would have known/thought to lower the engine from it's mount for better access, so you probably saved me $250-300 by helping me do the job myself. Thx!

[@ronbunker5778]

Did you replace the idler pulley with a used part?!

[@kurtgood2914]

Very impressive video

[@KendrasEdge757]

Probably should’ve gone ahead and replaced the belt while you’re already there replacing the tensioner. For anyone looking to actually do this.

[@philipzapata9105]

LOWERING THE ENGINE MADE A HUGE DIFFERENCE. Thanks so much for the info my tension pulley malfunction and I couldn't afford to tow it to mechanic, I had the tools and this guide made it easy.

[@arky429]

Had a stray cat under the hood i didn't know about jumped from the moving car heard the cat squeal dislodge my serpentine belt your video help me get on and running

[@N254NK]

I thought this was like an Altima...this has an extra pulley..I went at my tensioner straight from top..

[@maximolopez2065]

Me gusta tu forma de esplicasion

[@olemansailor6519]

Thanks for the help

[@appelsinnadurai]

Thank you very much.

[@miijjk]

So you mean to tell me there's not one video on the internet to take a 2012 Nissan cube base 1.7 l serpentine belt tensioner out

[@sarajasso7962]

Thanks , and blessing .

[@mgkl8465]

How come belt tensioners cause rear tires grinding sounds at low speeds. I was keep replacing wheel sensors speed sensors tcm etcm finally we cahnged this all things goes away

[@maximolopez2065]

Quisiera que me mostraras como quitar soporte de trasmicion Nissan rogué 2009 2.5

[@jackeddemon]

removing the motor mount was completely unnecessary. the bolt was accessible using an extension

[@walidshibani9593]

You don't have any videos for bravo 2 t jet?

[@TRQ]

+Walid Shibani We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@moyitostalygalm5457]

ya que habia desarmado por lo menos le hubiera dado una limpiada ya que se ve que esa camioneta estaba abandonada o se les inundo

[@samaguirre7388]

Rusty 😮 poor thing