HOW TO: 5TH Gen RAM 2019-2024 FUEL FILTER CHANGE for your 6.7 Cummins

Thanks for watching.
Fuel filter part numbers below
1 - 68436631aa fuel filter
1 - 68157291aa fuel filter
28mm stubby socket - a.co/d/22ybfpJ
1/2 wobble extension- a.co/d/exW0GH0
1/2 ratchet - a.co/d/5ASDbLJ
Catch bucket- a.co/d/idvFZra

[@wr.3428]

Thanks for this detailed video! I’m a 49-year-old female that weighs about 105 lbs and I love the look on peoples faces when I tell them I do my own fuel filter changes on my truck! I couldn’t believe the dealer wanted $450 to do this job. I’ll get it done in less than 20 minutes and save myself the pocket change. Thanks again for helping out folks like me.

[@IManOPERATOR]

Awesome! Happy you to help out! It’s a bit much for what the charge is for this service. And ya bam in out and done!

[@nunyobizkneez]

Im 6 days in to my 2021 2500 and first time diesel owner. Learning lots of what to do and what not to do thanks to guys willing to help out FNG's like me! Thank you for the video!

[@IManOPERATOR]

Nice congratulations! And happy to help out, happy you found this video 👌🏼

[@sirtito3]

Don't worry, I'm in the same boat.

[@stewie84]

Never be without a truck again…

[@frankh1786]

Same, and it’s time to change the filter on mine and the dealership wants to charge $540. Now I changed out the fuel filter of my first car and didn’t mind doing work in it myself since it was a beater but now I have this nice diesel truck I’m a little paranoid to mess it up.

[@greg5830]

I’m the FNG now.

[@Bobcat161988]

I wanted to be lazy an called up my dealership. They want 500$ to do this. Guess I can’t afford to be lazy when it’s this easy.

[@IManOPERATOR]

Ya it’s quite extreme lol, it’s still easy enough you can be lazy as you work

[@DanielRamirez-xw8mi]

😂😂😂😂😂this is the best lazy convo I’ve ever herd 😂😂😂

[@alfonsoolvera2596]

Same here ☝🏽☝🏽😂😂😂

[@tylerskidnuk6836]

That’s 1 beer per filter lol you can enjoy yourself and save money at the same time lol

[@mikehoncho4472]

My 2019 Ram 2500 is my first diesel and I had no idea how to change these or where they were at. Thanks for the video, your video helped me get mine changed.

[@IManOPERATOR]

Awesome. No problem 👌🏼

[@JamonBoi]

I appreciate this brother, good footage and instructions. Saved me $358.00!

[@IManOPERATOR]

Awesome! Happy it helped you out!

[@smoothlandin]

I subscribed for your equipment videos and hauling but knew I'd be watching this video as soon as I reached 7500 miles on my 2020 ram3500. Well 9500 and I finally have a day "off" so it's maintenance time. Thank you

[@IManOPERATOR]

Welcome aboard! and thank you!

[@franziskabaiker8097]

Thank you so much for including the part numbers. That saved me a good bit of research. Your video was exactly what I was looking for.

[@IManOPERATOR]

Awesome! Appreciate the feed back. Happy it was easy for you!

[@LivinLife2DFullest]

I was paying 400 plus to get this done 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️ thank you for the video. I just did it myself after watching your video and started right up!!! No leaks and I’ll be doing this myself from now on 😂😂😂

[@IManOPERATOR]

Heck ya one of the reasons for sure save soooo much hard earned money. Thanks for the support!

[@RAM5500CAMPERTHING]

About to do mine for the first time, new to diesels, thanks for taking the time to do this video!

[@IManOPERATOR]

Awesome happy you found it!

[@edwardzechunes]

thanks man - so easy to do this. I didn't use a hose, just a clean glass jar right under the port. after loosening the canister cap I drained couple more times before removing rear filter cap. first time maybe 90 min with set up and clean up, watching video etc

[@IManOPERATOR]

Perfect! Happy you found the video helpful! Keep that girl tip top

[@rox9975]

Great video, my first time changing it myself on a 2021 RAM 2500. Thank you for taking the time to help us out. I do need to find some better ways to keep the diesel from spilling. I don’t like the mess it creates in my driveway. My only suggestion was on the rear filter replacement…push the new filter in place first (it will stay there) and then put the cap on and twist. It’s much harder to put both in at the same time as the filter needs to sit in there properly. Worked great for me 😎

[@IManOPERATOR]

Awesome happy to be able to help out. And yes you’re correct on the filter I guess it a what worked best for you. Some reason I’ve tried that couldn’t get the thing to thread to save my life

[@GaryBlankenship96b40]

Just got 2022 dodge ram 3500 ho cummins 1040 miles just researching my maintenance great video thanks

[@IManOPERATOR]

Awesome! Happy you liked it.

[@josevizcarra9461]

Thank you for the great camera positions. Easy to understand

[@IManOPERATOR]

Awesome thank you for the compliment

[@squashoe]

Thanks, changing mine tomorrow. 2022 3500 with Aisin much appreciated

[@IManOPERATOR]

Awesome! Happy you liked it

[@bondservantministriesinc.672]

I just bought my Ram! I’m saving this video for later! Thanks for the video!!!

[@IManOPERATOR]

Happy to hear! Congratulations on the new truck!

[@tonyndebr]

Always nice to have a refresher prior to changing!

[@IManOPERATOR]

Happy to help!

[@derekostrom358]

Thanks for the video. Just about to change mine on my 22 ram 3500. First time diesel owner and not used to changing fuel filters for appreciate the bid. God bless! D God

[@IManOPERATOR]

Awesome and welcome to the party, happy you found the video to help!

[@timothystokes9266]

I just bought a 2022 6.7 megacab. This is my second 2500 6.7, and I paid to have them done everytime before. Almost $400 everytime. I plan on doing my own this weekend thanks to your video. I think I’m going to try and get some clear flexible tube to attach to the rear petcock to help with draining it around the drive shaft.

[@IManOPERATOR]

Little tube is nice to have. Mine was to small sadly but. Could be worse

[@1scooterpilot1]

Just watched you video. Couldn't believe how clean your filters were when you pulled them.

[@IManOPERATOR]

Good fuel make a difference!

[@TheAndyBlass]

Ha, I almost didn't give you a like thumbs up but when you me ntioned at the end to check for diesel leaks I knew you were good on what you are doing. Great refresher video for me....thanks...

[@IManOPERATOR]

Haha 😂 I appreciate that! The simple things can snag you the worst

[@caidenstyles2644]

That was perfect …thank you sir. I have a 5500. It took me 30 min lol. Loving it I was quoted with oil change from dealer. $750.00. Lol ..these filters only cost me $171.00. Lol all the way to the bank baby. Thanks again.

[@IManOPERATOR]

Bad ass! Ya that’s some expensive 30 min service that they want to charge. Happy you found the video!

[@noypiloft7810]

Damn I spend almost $500 just to get that done! Now after watching your video.. it’s pretty easy to do it! Thanks!

[@IManOPERATOR]

I almost did the same mistake cause I was being lazy lol. No way stealership not this time ha

[@justinhommel8556]

My 2020 has 50k miles on it. Last 4 Filter change have had the dealer do it for $700-800. . . No more. I got both filters for 120 from Mopar Whole sale, going to do it myself and save $600+ Thanks for video!

[@IManOPERATOR]

Happy you found it! Always a good feeling when you get to save a few hundred!

[@32degreestowing76]

Cheers for Vid When i had to pay $400 aus$ just for the filters this saved me the extra $200 labour 🙌

[@IManOPERATOR]

Awesome! Happy to help!

[@billyreinhardt]

Wow that worked like a charm. Fix it in about 2 mins. What kills menus that the truck was at the dealership because the electronic transfer case wouldn’t come out of neutral…they fixed that but didn’t address the gear shifter.

[@steveb792]

Best video out about replacement.. thank you!

[@IManOPERATOR]

Appreciate it!

[@navymark101]

Thank you my friend, I'm headed out to get a 28mm socket and I'll be ready to complete this task, thanks again, it was a big help...

[@IManOPERATOR]

Awesome! Happy to help

[@seant.1662]

A 28 mm doesn’t exist in my area . The struggle is real .

[@seant.1662]

A 28 mm doesn’t exist in my area . The struggle is real .

[@navymark101]

@@seant.1662 I actually couldn't find one either however a 1 1/8" socket did the job.

[@Hey_Hold_This]

Thanks i know I’m getting close I’ve got a 21 2500 6.7L wasn’t looking forward to paying $400+ for something so simple! Thanks

[@IManOPERATOR]

Right on!

[@tuckerjeffrey]

You have no idea how much this helped me. I couldn’t tell from the video what you were doing with the upper filter as well as I could the lower filter. I took my new 2021 ram 2500 to the dealership in which I purchased a $6200 service/extended warranty on it yet when I brought it in for my first service at 7500 miles they wanted to charge me $420 plus tax I assume just to change the fuel filter. I am mediately pitched a fit and had them cancel the service policy where they were going to maintain my truck for seven years or 84 months. They knowingly miss lead or said they forgot to tell me that the fuel filter wasn’t covered so it would’ve been 420+ tax every service in addition to the $6200 plan that I had purchased and I thought that was crappy of them to do with me that way. Thanks for the video and the tips

[@IManOPERATOR]

Ya I’m sure they “forgot” to mention that to you. It’s definitely way over priced for them to do a 15 min service with $160 ish in filters Happy you found the video to benefit you. It’s an easy process do it with your oil change each time you’ll be good to go, I do recommend only to buy oem filters. Online or something dealer wants to much for them. No aftermarket filter comes close to the quality of the mopar filters

[@dnye6714]

I feel your pain...did same thing to me .....never again

[@volkodavwolfcrusherlv7133]

@@IManOPERATOR I found Doc filters are just as comparable. They have done great on my ram 3500

[@IManOPERATOR]

@@volkodavwolfcrusherlv7133 awesome, ya been hearing a lot of good things about those

[@volkodavwolfcrusherlv7133]

@@IManOPERATOR yes, they are great, I have used on multiple trucks and pay around $100 for both filters delivered. Dealership is a total rip off!!

[@davidrobine5350]

Good procedure and video! Clear and to the point. Thanks!

[@IManOPERATOR]

Happy to help thank you

[@elinnik29]

Most helpful and detailed video. Thank you.

[@IManOPERATOR]

Awesome! Happy to help!

[@XCracer527]

Great video man, straight to the point!

[@IManOPERATOR]

🤘🏼🤘🏼

[@eyeseeklight1605]

Thanks for the help, did mine this morning!

[@IManOPERATOR]

Awesome!

[@matthewphillips719]

Great video. I'm about to do mine this morning. Very helpful! Take care!

[@IManOPERATOR]

Awesome hopefully went smooth for you

[@julioe.djadventures4249]

Very helpful video. I have a 2500 with the 6.7L Cummins, same config. under the hood as your 3500. It's a great truck, I might add. I'll be changing my fuel filters out myself for now on. The dealer wants $650.00 to change out. They explained to me that it is very hazardous work,,and should be left to pros. only, haha!! That's why the price is what it is.. Thanks for posting!

[@IManOPERATOR]

Ya it’s quite outrageous what they charge for a 15 min job. Happy you found the video happy that it helped out!

[@winning564]

Great video bud very informative bud only part I think I missed was the part about using the universal/ wobbly

[@IManOPERATOR]

Thank you!

[@nazar9826]

Thx you so much for your video. Now I can do it myself. Keep up the good videos

[@IManOPERATOR]

Very welcome. Happy you found it helpful

[@clarkgriswold2480]

Great tutorial. I'll be doing this today. Thanks!

[@IManOPERATOR]

Happy to help 👊🏼

[@chrisfrom8585]

Thanks, just got quoted 930 bucks here in san diego.

[@IManOPERATOR]

Oh for the love of god no way, I just did mine again today, literally done in 10 mins

[@aaronkelley8909]

This is so easy! You can do it. Who quoted you 930 is a crook.

[@HotIsotope]

Good video, first time change for me. My last Ram only had one filter and it wasn't plastic like these. I broke the valve 8mm nut off trying to get it to open and drain. Had about 3/8 of a turn so it was a slow drip. Ordered extra online. No on within 2 hours of Charlotte NC had the valve. Went to Gastonia Dodge they had the whole cap with the valve in it, $79.85. So, with the spare cap and the soon to arrive bleeder valves I should be okay. As soon as I saw the first video and how the whole canister flexed and twisted, and the effort put in to make it turn, I figured the I'd be replacing the whole thing. Wonder why Fiat went with plastic??!! Love the truck but that is NFG! Good luck to the rest of y'all......

[@IManOPERATOR]

Oh man that sucks. Got to love plastic. Happy you found someone that had it. Expensive fix but you’re back on the road at least

[@raidercat9830]

Awesome video dude, helped me out a ton.

[@IManOPERATOR]

Thank you! Happy to help

[@DaveL-lk1yv]

Great video informative and straight to the point

[@IManOPERATOR]

Thank you! Happy it helps

[@mikeb2097]

I am a Field Service Engineer, fancy way of saying I am an over paid Industrial Maintenance guy and I find a lot of things are not as hard as people would have you believe. I am going to retire and going to pull a 5th wheel around the country and getting myself lined up to do this while on the road. Very helpful and thank you.

[@IManOPERATOR]

Lol I like the classification! Enjoy you’re retirement! Have fun! Happy you found the video!

[@danielwood1894]

I nusr bought my first dodge/ram product 2 months ago..nicest truck I've ever had, but why the hell do the engineers always design things to be way more difficult than they need to be, and then the car manufacturer actually builds it?? Where is common sense????? Also..a tube of white grease goes a long way on those O-rings

[@IManOPERATOR]

@@danielwood1894 just remember cummins motors are not only in trucks like a power stroke or a duramax. They don’t change locations for trucks, like my chipper has a 6.7L cummins in it and the fuel and oil filters are right there where they need to be to Service the motor.

[@danielwood1894]

@@IManOPERATOR true, however my buddy has a 2021 3500 flat bed duallie and the fuel sep is right there on the frame rail under the rear B pillar..why not do that for the 2500 as well instead of directly over the drive shaft? And you cant get the fuel filter out of the housing under the intake without knocking all the dirt on the wiring harness into the bowl...it didn't have to be that way

[@IManOPERATOR]

@@danielwood1894 I hear you loud and clear on that one, there’s no winning at times lol, there will be some relocations being done down the road on this girl for sure

[@irishCanadianGuy68]

hmm....who would've thought that would be that easy. m dealership charged me, no kidding, $611 to do that work. with your video i think I'm going to save a LOT of money.

[@IManOPERATOR]

Ouch holy heck, ya do it yourself save some money for sure

[@johnlankford8418]

Love the video to the point !

[@IManOPERATOR]

Thank you!

[@fernandourias9507]

Thank you I need to change my filter for my 2016 ram truck and I didn’t know where it was.

[@IManOPERATOR]

No problem, just remember your rear filter is a different model. Be sure not to buy the wrong one

[@badassblazer]

thanks for making the video. i am about to do this now on my '22 2500.

[@IManOPERATOR]

You know it!

[@TamraOstrihonsky]

Thanks man …. I’ll change mine this weekend 👏

[@IManOPERATOR]

Sweet!

[@diamond_industries]

Great stuff, thanks for posting. Now i know how to change a fuel filter on another truck i don't own yet, hahah.

[@IManOPERATOR]

Lol you know it. I’ll provide all sorts of information you might not need just yet 😂

[@isaiahandchrisvillanuevas5519]

u made it look sooooo easy. thank u

[@IManOPERATOR]

👊🏼

[@texlee1640]

Nice to see that I don't have to drain the diesel from the front filter. Heading out to change mine out here this afternoon at 15K miles.

[@IManOPERATOR]

Ya they make it simple. Best of luck happy you found this video

[@texlee1640]

@@IManOPERATOR It wasn't half bad but it was still a messy/stinky job. Surprised at how dirty the rear fuel filter/water separator was at 15K.

[@IManOPERATOR]

@@texlee1640 ya they can get bad pretty quick I only fill from chevron stations, always have had clean fuel

[@fishwithjd]

Thanks!! Super helpful and saves me $400!

[@IManOPERATOR]

Hell ya man! Happy to help!

[@user-rk1lu6go5o]

Thanks for this. Just finished changing mine. I'm old and initially planned to have a local shop do this. They wanted $974.00 to replace the 2 filters. I was, at one time, their best customer, according to the owner. No more.

[@IManOPERATOR]

Perfect happy to hear that! Money is worked hard for no need to just throw it back out there

[@DaleMac56]

Thanks. I use to drive a tractor trailer (Cat, Cummins, & Mack Thermodyne motors) and I did all my oil & filter changes. This is my first Dodge Ram Cummins (I'm older now) and when they told me how much it was to change the oil & fuel filters, I immediately thought it must be a lot more difficult than when I was younger. Well, your video cleared that up for me. They want $229.95 to change the fuel filters $184.95 for oil & filter change! WTH? I can do all of this for a lot less! Thanks for confirming! Good video!

[@IManOPERATOR]

Ya it’s a rip off and a very simple service to do. Happy you found this video!

[@5150cash]

1st👍. Dang you drive the heck out of the truck.

[@IManOPERATOR]

Lol 🤘🏼🤘🏼🤘🏼

[@sxsoffroad43]

Awsome video bud made it a breeze!! Much appreciated! Ram it!

[@IManOPERATOR]

Thank you!

[@jor8061]

I used a 5/8” hose on front filter to easily direct fuel to spill into catch can. You will see the opening from underneath, above front axle if you have a 4X4. You can also use a big funnel for rear filter to direct spilled diesel into a container.

[@IManOPERATOR]

Honestly after the truck sits for a bit I’ve never had the front filter spill anything when changing it. Tube is a life saver

[@aldopale2495]

Great video. Thanks so much.God bless you.!

[@IManOPERATOR]

Appreciate you! You’ve very welcome and same to you!

[@olivieridistributioninc4865]

Excellent video, thanks. 👍

[@IManOPERATOR]

No problem happy you found it!

[@ralph7316]

Good video. Thanks a lot for the info!

[@IManOPERATOR]

Thank you! And you’re very welcome

[@meseahunt]

thanks, keep up the videos with the truck

[@IManOPERATOR]

Appreciate it!

[@BartDavis100]

Thanks for the well done video!

[@IManOPERATOR]

Thank you

[@timchambers7915]

Good stuff! Appreciate it

[@IManOPERATOR]

You know it!

[@mattd8411]

Awesome thanks a ton man. People acted like this is the worst thing ever don't seem that bad. Ridiculous dealer wants 400 for this

[@IManOPERATOR]

You know it! And ya it’s that hard of a job to do at all, not worth the $400 bill from the dealer no doubt!

[@mattd8411]

@@IManOPERATOR thanks buddy what's the best place to order their filters from?

[@IManOPERATOR]

@@mattd8411 I’ve gone to mopar websites And a few buddy’s have gotten filters from docs diesel too, they’ve been great. And keeps away from fake “mopar” filters from eBay and Amazon which I’ve been seeing quite a bit

[@mattd8411]

@@IManOPERATOR awesome thanks man

[@andylopez715]

Thanks man. Very helpful..

[@IManOPERATOR]

Awesome!

[@natei3518]

Excellent video. Thanks for sharing.

[@IManOPERATOR]

Appreciate it

[@alvaroramirez7461]

Very helpful, thank you.

[@IManOPERATOR]

👌🏼👌🏼👌🏼

[@DarkStarDireWolf]

Great video thank you!

[@IManOPERATOR]

Appreciate it

[@user-it3el4qf1z]

Thanks for the awesome video

[@IManOPERATOR]

Thank you! Youre welcome 👊🏼

[@hugehelp]

you rock thanks! was going to pay the dealer but they pissed me off. Save $$$ Mine is a 2021 HO so the same

[@IManOPERATOR]

Happy you find the video! Ya same some money

[@hugehelp]

@@IManOPERATOR honestly was just going to pay then I looked at warranty and diy oil change or fuel filters doesn’t void unless I f**k it up. So easy money 💰

[@bennievillanueva4052]

Saved me $400! Thank you sir!!

[@IManOPERATOR]

Awesome! You’re very welcome

[@DeruginizCLS]

Thank you brother, looks ez

[@IManOPERATOR]

👊🏼👊🏼👊🏼👊🏼

[@ZachThorp]

That is an epic intro! thank you for the how to! on it tomorrow!

[@IManOPERATOR]

Thanks! Get it done man. Happy To help

[@user-od3br3pt8e]

Great video thank you.

[@IManOPERATOR]

You know it 🤘🏼

[@kevincameron8437]

Good video. Im glad they updates the rear filter from the 2016 models, but there’s still got to be a better way to design a drain in that rear housing. And the front filter is a pain and I always feel like I’m going to round off that top cover. Engineers never sit down with mechanics!

[@IManOPERATOR]

I hear you there! I’ll be getting the cat filter housing and replacing this here sooner or later

[@xcountry1582]

Please let us know when you do. I've looked at the CAT system and the front bypass but haven't done it yet.

[@IManOPERATOR]

@@xcountry1582 ohh for sure I’ll have a video for that 🤘🏼

[@ricksasek5483]

Thanks for the help

[@IManOPERATOR]

👊🏼👊🏼

[@stevecandito7193]

Thanks for the video just had my first fuel filter change on my 2021 2500. The stealership got me for 550 bucks. That’s not going to happen again.

[@IManOPERATOR]

Happy you found it! Ya don’t let them do that to you anymore!

[@r8228c]

That rear housing is identical to my BMW oil filter housing and oil filter. Super crazy..

[@IManOPERATOR]

Really!! That’s definitely random lol

[@seant.1662]

Thank you ! I don’t mind some sweat equity !

[@IManOPERATOR]

Of course!

[@newgtguy]

I stopped by my dealer yesterday to see what they would charge for a fuel filter and oil change. They quoted me $450 for the filter change and $200 for the oil change. Total ripoff! I'll be doing all this work myself. Thanks for the informative video!

[@IManOPERATOR]

Ya!! They charge like crazy, definitely not a fun price. Happy you found the video to help out

[@kaylasanchez9798]

@@IManOPERATORdo the fuel filters and oil need to be changed at same time?

[@IManOPERATOR]

@@kaylasanchez9798 you don’t “have to” however they typically need changed around the same time. By the time my oil gets to 10-15% my fuel filters will be maybe 30% If I’m already under the truck I’ll just change the filters too.

[@defiance772]

​@@kaylasanchez97987

[@Blackshirtsguru]

I shove a clear hose in the housing of the rear fuel filter and drain what I can before removing the housing cover.. Makes it somewhat cleaner so ya don't have diesel fuel splashing all over the drive shaft

[@IManOPERATOR]

Ya I know 😂 dam hose I had was to small so I just said screw it

[@Blackshirtsguru]

@@IManOPERATOR 👍

[@floridaboattrash2527]

Good video. Nice job

[@IManOPERATOR]

Thank ya. If you’re questions on being to tight there is a TQ spec if you want to play it safe fyi,

[@Pete-from-Tn]

If you will crack that drain again. As soon as you see a drop of diesel come out around the housing. That will drain the rest of the fuel. It will not drain it all the first round. As it catch get a breath of air. That will let it finish. Also a drain hose on the drain nipple keeps the fuel from making a mess also.

[@IManOPERATOR]

Yes! That’s what I do now. Finally have a drain tube that works on that valve now also. The tube I had for this video sadly was to small.

[@macadoo_circuits1520]

Very Informative

[@johnsanford4569]

Great video.

[@IManOPERATOR]

Thank you

[@terencef5806]

Thanks. Big help.

[@IManOPERATOR]

Of course!

[@robertmatthews2776]

Thanks. GOD BLESS.

[@IManOPERATOR]

You’re very welcome

[@kimberlybarrett5755]

My husband and I just bought a 2020 Ram 2500 Diesel. We are at the point where it is time for us to take it in for an oil change, and what people are quoting us for the 2 filter changes is ridiculous! Some people even state that they are charging us for 2 men for labor. Your video was very informative and so worth the watch and education. Question: Will the filter part numbers you supplied in your video description also work for our Diesel?

[@IManOPERATOR]

Happy you found the video! To answer you question, yes your truck will Use the same part numbers. Big time it’s an over charge from the dealer to be changing these filters. To easy not to do it yourself

[@gorgonbazil2652]

Great video.. Just a note, get some dielectric grease and coat your O-rings, they will go in smooth and you will get a better "feel" for the torque.. The fuel makes the O-rings make that awful noise and cause them to shudder as you tighten, the grease will stop that... Also if you unplug any electrical plugs, put some of that grease in there too, it will prevent them from corroding and make them easier to unplug as well.. Nice truck BTW....

[@IManOPERATOR]

Definitely I appreciate that information I never really thought about that. Appreciate it

[@ToneeBologna.]

Can you use silicone lube?

[@oknod7363]

White lithium grease works too.

[@gregcoughlin4615]

I think dielectric grease will give you problems in your electrical components, it acts as an insulator, not a conductor. You could restrict the current if you're putting it in your plugs.

[@gorgonbazil2652]

@@gregcoughlin4615 No Sir, Used it on electrical components to protect them from salt water in the Navy for 20 years. It lubricates the connection and also prevents corrosion. There is a reason the Navy ships have lasted since WW1

[@guillermoperea2702]

Great video

[@IManOPERATOR]

Thank you

[@GaryBlankenship96b40]

Greatvideo thanks

[@IManOPERATOR]

No problem thanks for the compliment

[@jomarkelly3932]

Thanks! I used to always service mine. I just bought my 2022 RAM 3500 Limited HO, replacing my 2012. I am 70 now, so have to have it serviced now… but I do like to know what I am in for… LOL. My ‘12 RAM only had the fuel filter under the hood. Thanks! John, Greenville, OH

[@IManOPERATOR]

Very nice upgrade! Heck being at 70, nice new truck, kick back let them young folk maintain your rig! You just go out and enjoy it, of course after double checking their work cause I have trust issues hahaha

[@richardbertrand2770]

Good video dude, I'm about to service my truck as well, I always do my own vehicle maintenance but it's good to see this video for reference. I have 14500 miles on the truck , not sure the fuel filters are dirty or not but I'll swap them out to get an idea of how long they'll go before change is needed.

[@IManOPERATOR]

Thank you! Happy you found it and it helped. Ya definitely get them changed out and see how bad they might be. Some times that can dictate where you get your fuel next time around. I’ve found that chevron stations have the cleanest diesel fuel

[@27295mvestal]

My top one is freaking tight!!

[@IManOPERATOR]

Ya they do that lol

[@sergei7502]

Thanks, man.

[@IManOPERATOR]

👌🏼👌🏼👌🏼

[@joanmetivier3599]

Thank You!!!!!!

[@IManOPERATOR]

Always!!

[@zzr3g23]

Thank you!!

[@IManOPERATOR]

🤘🏼🤘🏼🤘🏼

[@azau79]

Great Video - Where does in O-ring go in the on-engine filter housing? From the video it looked like you pushed it to the bottom of the housing. Thanks!

[@IManOPERATOR]

I appreciate it, and yes what you saw or think is correct. The o-ring goes on the housing itself, took it off the same way I did for the rear filter housing

[@davidtrejo352]

Thanks you save me about $450 at the dealer plus filter

[@IManOPERATOR]

Hell ya!! No problem at all

[@connormccormick3644]

Thanks!!

[@IManOPERATOR]

👊🏼👊🏼👊🏼👊🏼👊🏼👊🏼👊🏼