How to access diagnostics, club settings, and time on a Precor P30 console.

In the video you will learn how to access the 3 different service menus within the Precor P10, P30, P30i and P31 consoles.
Hardware Validation - code 51765761 will give options for a set of diagnostic tests used to troubleshoot, calibrate, and verify machine operation.
Club settings - code
5651565 used to configure the club specific workout, console, and maintenance reminder settings.
Information display- code
65 used to access the equipment usage, hardware, software, error code, and maintenance information.

[@JohnGeraghty-h8b]

Thank You Mike that was awesome information

[@mruggia79ct]

You're welcome!

[@mikeruggia7370]

Hi. If you have to pedal fast, to keep the console lit, the internal battery is most likely dead. You can purchase a 12volt 4ah battery online for much less then directly from the manufacturer. Good luck.

[@angiedehoyos7718]

can I change the settings for how long the screen stays on? My screen I have to pedal like crazy to keep it on.

[@thebigswami]

is it possible to upgrade a P30 Console on a Precor AMT 885, to a P80 or P82 console?

[@mruggia79ct]

Yes definitely a p80. You will just need a power cable that runs through the frame, a adapter with plug and receptacle. The same goes for the p82 however, you may need a different lower board as well. Hope this helps.

[@thebigswami]

@@mruggia79ct Thanks for the fast response. Sincerely appreciate it.