How to Activate and Bind DJI Digital FPV Goggles System

DJI FPV System: geni.us/DJIFPV2
GNB Batteries: geni.us/GNB4SB...
Soldering Station: geni.us/Weller...
XT60 Connectors: bit.ly/XT60Shro...
Solder Mat: bit.ly/SolderMat
Assorted Heat Shrink: bit.ly/HeatShri...
Check out my current giveaway: geni.us/DroneRa...
These are the current Drone Coupons I know of: geni.us/DR101Di...
The DJI FPV Goggles systems is pretty easy to setup. But I’ve heard of a few issues, so just to be sure I’ve created this walkthrough of all the steps required to register the system then how to bind the DJI FPV Goggles and the DJI Remote to the DJI FPV Air module. Then my first impression upon seeing it the first time.
Supporting Droneracer101 on Patreon means more reviews and giveaways for you: www.patreon.com/droneracer101
**************************************************
See my current list a favorite drones and accessories here: geni.us/DR101Fa...
These are some of my favorite components right now:
**** Tiny Whoop ****
• Eachine E010S
Banggood: Eachine E010S: bit.ly/E010S
Extra 45C E010 Batteries: bit.ly/1S45C240mAh
**** Brushless Micro Drone ****
Lizard95: bit.ly/EachineL... • Eachine Lizard95 Revie...
Leader 120: bit.ly/Leader12...
• Leader 120
**** 5 Inch Racing Drone ****
• Diatone GT200 2017
Diatone GT2 2017 True X: bit.ly/DiatoneG...
Diatone GT2 2017 Stretch X: bit.ly/DiatoneG...
**** Radio Transmitter ****
Beginner Flysky Good Radio: bit.ly/FlyskyFSi6X
Best Beginner Option - FrSky GREAT Radio
Banggood: bit.ly/TaranisX7
Gearbest: bit.ly/TaranisQ...
Top of the Line FrSky: bit.ly/TaranisX...
**** Goggles ****
Entry Level Budget Goggles: bit.ly/VR007
Eachine Upgrade Goggles with DVR and Diversity: geni.us/EV800D (These are the best option)
Aomway Commander Goggles with DVR, Diversity and Headtracker:
Banggood: bit.ly/AomwayCo...
Gearbest: bit.ly/AomwayCo...
Just want to support the channel at no cost to you? You can (and you can find some deals) with these links:
Banggood: bit.ly/DR101-Ba...
Gearbest: bit.ly/DR101-Ge...
Amazon: geni.us/EGAmzC...
**************************************************
Subscribe and be a DroneRacer! : / @simracer101
Enjoy & remember to like and subscribe!
-- Find DroneRacer101 Online! --
Facebook: / droneracer101
Twitter: / droneracer101
Instagram: / droneracer101
-- Credits --
Most graphics created by: designhandyman....
Music by DJ Quads: / channel
Droneracer101 is a participant in the Amazon Services LLC Associates Program and other affiliate programs, advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and other sites at no addition cost to you.
Thank you for supporting DroneRacer101 by using these links. Testing all this hardware is quite expensive.

[@SimRacer101]

The DJI FPV Goggles systems is pretty easy to setup. But I’ve heard of a few issues, so just to be sure I’ve created this walkthrough of all the steps required to register the system then how to bind the DJI FPV Goggles and the DJI Remote to the DJI FPV Air module. Then my first impression upon seeing it the first time. DJI FPV System: geni.us/DJIFPV2 GNB Batteries: geni.us/GNB4SBatteries Soldering Station: geni.us/WellerWES51 XT60 Connectors: bit.ly/XT60ShroudedConnectors Solder Mat: bit.ly/SolderMat Assorted Heat Shrink: bit.ly/HeatShrinkKit-BG Check out my current giveaway: geni.us/DroneRacer101Rewards These are the current Drone Coupons I know of: geni.us/DR101DiscountCodes Supporting Droneracer101 on Patreon means more reviews and giveaways for you: www.patreon.com/droneracer101

[@rsugdenmd]

Hi ... I bought an iFlight MagaBee HD BNF drone , that came w. the RXSR receiver and the DJI Digital FPV Air unit ... BUT NO INSTRUCTIONS ON HOW TO CONFIGURE AT ALL. NO INSTRUCTIONS ON BINDING THE RECEIVER TO THE DJI REMOTE CONTROLLER. I've linked the Goggles to the Air unit, but don't have a clue how to link the controller to the receiver controller in the drone. Here's the link to the drone I bought - www.iflight-rc.com/index.php?route=product/product&product_id=1018 . Do you have any suggestions re linking the DJI remote controller to the receiver in the drone? Thanks .. and Happy New Year !!

[@pimpassbossman5310]

@@rsugdenmd Hey, did you get this figured out? just got my bumblebee hd bnf and bound it to the reciever (buttons on both) and it show up in the goggles, but will not arm the quad. And when I try plugging in to betaflight it won't connect.

[@rsugdenmd]

First, there is another USB port on the controller board, other than the one on the DJI Air Unit .. tiny and difficult to see .. just behing and below the Air unit ... Then it should connect to Betaflight. When I got mine hooked up, they had set the wrong Comm protocol ... can't remember the right one, but it is on the iFlight page w. the MegaBee .. and then you can set the ARM switch, the upper right one on mine, to turn the motors off when it is in the forward position. Also, the left, forward switch controls the flight mode ... very rapid and unstable in the forward position, more stable in either aft positions. Search for Joshua Bardwell on KZbin ... he has lots of info and helped me get mine configured .. he's doing a video about how to configure the MegaBee for the DJI FPV Goggles, Air Unit and Controller ... Real hassle w. no instructions!!

[@digitalnomadlawyer6]

how do I take off? I move the arm switch up and down, but nothing happens

[@mattb1037]

17:20 the moment the magic video hits your eyes. haven't heard joy like this come out of a full grown adult lmao

[@kath011]

Aw Thanks DR! Very helpful video. Now I know I power the air unit directly thru a 3S. 👍👍😊

[@hansturpyn5455]

My dji system is just delivered, thanks for the tutorial and yes this is wooow

[@SimRacer101]

It’s way more of a game changer than I expected.

[@hansturpyn5455]

Yes i agree, i had the connex but that was a dissapointment. I am a fast racer and the lag was just to much. Now i tried the dji in combination with my taranis and xsr (sbus) protocol and there was a tiny amount of lag but with the dji controller and sbus its completly gone.

[@readysetdrone]

Very helpful video. I just got my first DJI Air unit and am setting up. It's not too bad of a process, but this video was very helpful. Thanks!

[@A1n3dr5e1234567890]

17:18 this reaction resumes what it is all about. Great equipment.

[@rueda82nd]

That was my reaction when i first did FPV on my wing , was so excited i lost orientation. :)

[@snowbum007]

I couldn’t figure out . Video helped .

[@jamiehill9578]

do u gotta activate the goggles to use them with another fpv drone

[@trowland9575]

Thanks DR101, you've been my DJI fpv tutor! Thank you.

[@tennesseestubby]

TX is RX and RX is TX gets me every time. This is my second unit and was pulling my hair out until I watch this video.. Thanks

[@ihagoma]

Worked, thanks a lot

[@justinmedina2050]

Should they turn on as soon as you connect the battery? mine don't do anything, i tried by pressing the red bottom on the right, i also tap and then hold for many seconds. It just don't do anything.

[@chriscottell6854]

Thanku for this video. I've had my Iflight Chimera7 dji with crossfire, and my Jumper T18 pro with crossfire for 4 days now, trying to setup everything on betaflight and flash firmware is so stressful. Especially when I'm not sure what to flash firmware to. I'm new to fpv so having trouble.

[@mickquinn2923]

Excellent video thanks! Awaiting a QAV to bind up with my dji :-)

[@choppergirl]

Does the Controller suck, compared to say a Taranis? Looks big, bulky, heavy, and short on switches, and with a proprietary battery. I think the setup part is damn daft, what if you're a hold out still using XP? Or running Linux? or System 7.5.3? I run Windows 7 x64, but I'm going to have to check to make sure its supported... but for how long? And are they tracking the GPS coordinates of where I am flying?

[@Jake-mm1cz]

Was the quality of the Occusync & RE Goggles comparable to this new DJI system . Please do a comparison video in the future . Thanks ..

[@SimRacer101]

This is light years better than the RE.

[@rrenegadoo]

Excellent video......But I need HELP. I followed the instructions but when I plugged the goggles (3:48) I didn't get that Icon, I heard the "tururu😁" when I connected the cable but nothing happened 😳😢. I used different USB ports and I heard the noise but nothing...... whyyyyyy😢😢?

[@mustdodiving5263]

Thank you for the video... I did find it beneficial

[@dstepsfpv]

Thanks to Share, I bought the googles and 3 units for my drones, I'm gonna use my FRSky controler. But I have a big question?! Any time I want to Change the drone I have to rebind the googles with the unit?!? Or it saves the bind of my 3 units?!?

[@checkeredflagfilms]

Very informative! Thanks. Does it matter which antenna goes where?

[@christianjareczek9934]

Hi, for some reason, the app just never finds my controller. My controller just continues to beep.

[@steveh.9170]

also, these do get really hot. is that an issue. I assume if i put this in a plane the unit needs to be on the outside to get cooling!! thanks, great channel

[@Jake-mm1cz]

Is any of these components compatible with the RE Goggles or Occusync

[@SimRacer101]

I don’t think so. But I will confirm.

[@mattb1037]

very usefull. for those of you with 6s, you'll need a voltage regulator so you can power up your goggles. 7.4-17.6V

[@LoveRango]

I tried to connect my air unit to the DJI assistant but it could not find it. It would just keep making the sound of it connecting and disconnecting but never once pop up like it did for the DJI Goggles. Can anyone help? I'm running Windows 10

[@jdeshong08]

Thanks for this video. It’s sad that the DJI controller manual doesn’t even cover these steps.

[@cindynguyen7318]

I want to be able to see the quad and air unit battery on the goggle screen. How can I fix that setting?

[@FreshCoastDon.007]

So, what do you do with that battery on the goggles? Just let it dangle or do you rubber band it to the goggles??

[@annevanzwol]

When I power on my remote it beeps twice and shows red on the indicator. When I do the combi it stays red (beeps once). It does not turn blue. Fully charged, activated and updated the firmware. Any ideas?

[@digitalnomadlawyer6]

I'm having similar problem. Did you find a solution?

[@XDiezieX]

its annoying that you have to buy one more LiPo to use the goggles....

[@digitalnomadlawyer6]

How do I take off? I move the arm switch up and down but nothing happens

[@mathice]

I bought mine new but it was already activated...

[@acesk9196]

After connecting the goggles to the air unit and then connecting the transmitter, the goggles cannot be used when connecting to the air unit. Do you know the cause?

[@dcfpv5608]

So did the fatshark battery work for flying?

[@SimRacer101]

Yes it did, no problem.

[@formfaktor]

Hi did you ever do that optimal battery setup video for these goggles, like you said? :) I am just got my goggles, and I find the power situation cumbersome. E.g. a 850 mah 4S Battery doesnt seem to power them very long?

[@SimRacer101]

Alexander Wipf I haven’t found a solution I really like so I am working on a side project.

[@mediocrefpv5446]

Fill the heat shrink with hot glue.

[@MCsCreations]

Pretty interesting, Mark! Thanks for the step by step! 😃

[@TheHelicapt]

I noticed when setting up my quad in Betaflight the DJI air unit get pretty hot seeing I’m setting up the drone and it takes a while .... did you notice how hot it gets ?

[@allegorx58]

Unplug the battery?

[@bob6168able]

Thank you 👍

[@steveh.9170]

why do these goggles not work with DJI drones:/ ????

[@juneloko619]

U thinks it a good idea to activate my buddies goggles on my account?

[@RafaelMohedano]

I said "oh my God" too ❤😊

[@apolkxi]

Dji being DJI. I can sense more multiple updates coming.

[@SimRacer101]

I hope so. They kind of just dropped the Occusync though.

[@Loft54]

Goggles not connecting to PC. Driver issue I think. :( Interesting. I just plug it into USB3 and it worked :)

[@johncarr123]

I wonder why DJI did not give us an option to bind the DJI sbus to a Taranis

[@SimRacer101]

It operates on a 5.8Ghz. Taranis is 2.4Ghz. It would need a module for the Taranis.

[@johncarr123]

@@SimRacer101 Someone should design a 5.8hz module for the Taranis to bind the DJI sbus transceiver

[@BBooka]

Agree, confirm, agree, agree, confirm, agree,.... the mouse couldn't be very happy when you need so many times to click on Agree button. What if some time, mouse will not agree and confirm any more. ;) ;) ;) Just kidding. :D ;) I'm so jealous on this FPV image which you showed at the end of video. This looks jealousy so great.

[@garyluo4291]

Wow!

[@TweakRacer]

17:15 #AnalogDied

[@MnPaul1]

Activation on an fpv system is just silly. You finally have the proper flux - not silly.

[@SimRacer101]

Lol. I got both a syringe and a pen and threw out my 30 year old tin.

[@MnPaul1]

@@SimRacer101 Louis Rossman uses the gel and is the wizard of soldering. I imagine that it works great for heat transfer. People don't realize that flux cleans you connection and transfers heat faster.

[@SimRacer101]

I’ve always used the gel, but I had a whole bunch of pin headers to solder on my wing FC and wanted to try the pen for that.

[@allegorx58]

I cringe so hard when people say garbage like “I don’t care about giant corporations spying on me because I don’t do anything wrong.”

[@Inertia888]

…and two years later, your sentiment is all the more relevant!