HOW TO ADD THE END CABINET ONTO THE HARBOR FREIGHT TOOL CART

In this video we add the end cabinet from harbor freight to the 5 drawer tool cart. This is a popular mod for the tool cart. The end cabinet has a part number of 64971, 64448, 64447, 64358, 64159, 64450, 64449, 64973,and 64972. The 5 drawer tool cart has a part number of 56429, 64061, 64060, 64059, 64031, 64030, 64032, 64033, 64721, 56237, 64720, 56239, 64722, 56238.
#Harborfreightprojects
The goal was to make the ultimate tool cart. We also add a jack holder to the other side of the cart. This thing is a beast now.
If you liked this video hit that like button. If you have haven't subscribed yet what are you waiting for? This channel is awesome. If you haven't rung that notification button yet you better do it so you don't miss any of our killer content. Thanks again for watching and remember if you have a fast car you better BRING IT.
Check me out on Instagram @bringitmusclecars
Check me out on Facebook at Bring It Muscle Cars
Check out Saif at CrowdHunters. / yoizsalt. .
Music done by my friend Quinn. Check out his Soundcloud here
/ nezbassmusic

[@travisgustin4677]

Why didn’t u just use the grinder u mentioned to make the cuts? Guess I’m a little confused on that whole deal

[@BringItMuscleCars]

Travis Gustin I went to get my grinder. Someone borrowed it and didn’t put it back. I had to use what I had available.

[@travisgustin4677]

Bring It Muscle Cars nothing worse than that!

[@BringItMuscleCars]

Travis Gustin true. Everyone was like it wasn’t me. I didn’t know you had one. Yeah okay.

[@PaganWizard]

@@BringItMuscleCars I would rather loan out my dog than loan out my tools. At least my dog knows how to find her way back home.

[@BringItMuscleCars]

PaganWizard very true. I had to start locking my boxes at our shop because a lot of tools have walked away.

[@bobmoyer7929]

I put all my racing stickers on sheet magnets and then cut around them. That way I can take them off or move them around at any time. Great video !

[@BringItMuscleCars]

Bob Moyer that’s a great idea. Thanks for the idea.

[@arednecksgarage]

That's a great idea

[@johnreese7352]

Great idea

[@chrissoderberg5063]

I would have just put a set of casters under the new cabinet

[@BringItMuscleCars]

Chris Spderbetg I was going to. I still might once I see how it nice handles the weight being fully loaded.

[@PaulZillaX]

This is what I was going to reccomend. Maybe add a thin plate to bottom of the cabinet along the outside edge to support the casters, and add like 2 there.

[@BringItMuscleCars]

Paul ZillaX I might build a angle iron frame around the whole thing. Then use just 4 casters instead of 6.

[@tooolboxx]

I did just that. Built a small "trolley" with sides to hold the end cabinet. Sits at the same height as the 5 drawer cabinet. Works great and you don't have to haul all that weight around.

[@Williearmhole]

@@BringItMuscleCars if you do end up building a frame, be sure to film it. I'd love to see what design you come up with!

[@brandoncremeans8322]

Great video, but good lord, I felt like I was hammered the entire time watching this with how often it was out of focus.

[@magichands8817]

I REALLY like your idea with this to expand the storage capacity of the tool cart. I WILL definitely do this side cabinet mod to mine as well. Thanks! Also, food for thought, in my 22 years as an Air Force heavy equipment mechanic (mobility/deployments) we used to bolt the top and bottom toolboxes together by removing the drawers as needed for access and drill a couple holes and use bolts, fender washers and nuts to tie both together for better stability. You could do same by bolting through the corners and with spacers for empty space on sides on cart, along with casters that everyone has already suggested. Since you keep cart strapped inside trailer, this would prevent the side cabinet from possibly coming off IF you hit big enough bump or pothole then open trailer to find cabinet and tools off all over trailer.

[@TheTyrial86]

Switch to the blue caster wheels they sell. They hold more weight and last longer.

[@BringItMuscleCars]

TheTyrial86 I have two blue ones so all four are swivel casters now.

[@michaelmincey2622]

Your still need the magnetic paper towel holder and magnetic latex glove holder

[@BringItMuscleCars]

Michael Mincey you aren’t wrong about needing those. I’ll probably end up with them.

[@bobbystacey5360]

I built my paper towel holder . Just bought a plastic paper towel holder at Wally world and gorilla glued two magnets into it ! I enjoy building the things I need more than buying em .

[@MarioQuezada]

@@bobbystacey5360 Yeah but then it's not color matched lol

[@tmwtbd]

You misspelled "Bitch Mitten Holder" 😁

[@tedd1091]

Where did you source the floor jack holder? Nice Job on the tool cart

[@andresapodaca483]

Can you do a follow up video after some use, I love the idea but I'm concerned it will be to heavy and it will fall over with out the added Jack holder to counter balance, also did you look at possibly adding casters to the end cabinet

[@BringItMuscleCars]

Andres Apodaca I thought about adding casters to the end cabinet. Shouldn’t be to hard. Adding the jack holder was to help balance the cart out and to make it a easy place to keep. I’ll definitely do a follow up once it’s fully loaded and I’ve been using it.

[@FlaMark100]

Measure the gap to ground put a set of swivel casters on bottom of side box

[@BringItMuscleCars]

Mark Wilson I probably will once I get some weight in it and it needs it.

[@kennethburns7224]

@@BringItMuscleCars 4in. 330lbs. Solid rubber locking Swivel casters are what will fit and hold the weight easily...they are almost dead on to what U.S. General uses stock on there carts and cabinets

[@MrBuckshot18]

@@BringItMuscleCars Have you made a new video yet?

[@SpykeZ0129]

Wouldn't a dremel with a cut off wheel have worked easier than mauling it with tin snips lol

[@BringItMuscleCars]

Yes but I couldn’t find mine so I went with what I had available

[@SpykeZ0129]

@@BringItMuscleCars ooof. Well, thanks for the idea regardless!

[@ksp797]

Cutting that cart would have been a smooth snap with a dremmel. Done it a few times.

[@FastSlothVideos]

Here's a regular "I own a dremmel and everything is easy with it" guy. I was like "oh I can use my angle grinder" lmao

[@thomasjackson9218]

I hung an add on cabinet to both sides of the cart. Built a cradle of sorts outta 1/4 thick angle for under both add ons and mounted the blue hd wheels under each end. Also mounted the folding shelf to the side of the add on. Heavy but works great.

[@BringItMuscleCars]

Do you move it around. That’s got to be pretty heavy. The side cabinets are heavy. If I could weld I would have built a cradle. I had thought of that.

[@kennethburns7224]

Very nice job...im an HFT employee and I think most of The day how to mod almost everything in the store...did you try rubber wheel chock in The jack holder to stop the bounce?..they are always handy to have around

[@BringItMuscleCars]

Kenneth Burns that’s a great idea and easier then a strap. Thanks for the idea. I appreciate the support.

[@kennethburns7224]

@@BringItMuscleCars ...not to mention there's a coupon in play for those wheel chock for $4.99 each up to 4 per purchase until 4/19/20

[@BringItMuscleCars]

Kenneth Burns even better thanks.

[@magichands8817]

Kenneth Burns 👍 and you can use the chock(s) for increased safety when using the jack to get the vehicle up on the jack stands. Parking brake or having transmission in gear works when lifting the front end with rear wheels on the ground, but chocks needed for the front tires (which have no parking brake) when lifting up the rear end.

[@michaelmincey2622]

I was thinking of adding that end cabinet to my blue cart. Looks great. I also agree with you on Harbor Freight should come out with different color jack stands.

[@BringItMuscleCars]

Maybe they will hear us and do it. Everything else is color matched.

[@TheCarDetailingChannel]

Sheer determination while using metal shears 😂

[@WonderfulWeekenders]

Great mods for a mobile cart. I'm not into cars or a mechanic by trade but i will be getting this cart for regular fixit things (Harley etc.) in my home garage. Enjoyed this video!

[@BringItMuscleCars]

Thanks for the kind words. I’m glad you enjoyed it. Thank you for watching and commenting.

[@whirledpeaz5758]

Now 2024, HF listened. You can get matching color jack stands and Jacks. In purple now too.

[@EasyPeazy-wf4ck]

Dude like your videos, First show more women, second..can u add the 4 drawer green cabinet under the 5 drawer, that's the ultimate cart, just kidding about show more women. Its obvious no chevy no women ..lol. just playing gezz man . Chill

[@BringItMuscleCars]

Easy..Peazy haha. Check out me wrapping the hood. I think she is in that. Tomorrow’s video I wrap a C6 Z06. She’s definitely in that. Thanks for watching and commenting. I appreciate the support.

[@bonezimpulse6674]

Put some 22" under it with spinners harbor freight sells good looking rims and tires lol

[@BringItMuscleCars]

Bonez impulse that’s funny. 😂

[@ivanhernandez1652]

🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️ So he just said that he will use the die grinder to smooth the cutting, after those horrible cuts. 🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️ How about using it to do the cuts.🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️ WAOooooo!

[@justinwoods240]

Where to you get that paint from

[@BringItMuscleCars]

Lowe’s

[@meowmixphd]

Did the same hack on my cart, but kept the front of both units even. This meant notching the back of the side unit. I also bolted the side unit to the main cart’s legs, just for added security. I’ve been looking for a matching touch up paint for the neon green, so will look into 22Trips. Nice job!

[@movaughn20]

Just ran down to HF picked up a 5 drawer with 189. Coupon and coupon #64590322 good till 1/15 for free side tray with cabinet purchase. I was polite, and they did an over ride and got both for 189 out the door. White in stock. Heads up there raising the price on 5 drawer $10 after the 1st...

[@accurateexteriorsco]

FOCUS!...great video but hard to watch when everything is out of focus and blurry. very cool tho man i love the idea.

[@NHseacoast]

Harbor freight should. Notchthe side file cabinets, thanks

[@johnholmes6371]

Gotta work SMART not hard and USE the right TOOLS for the job. Very poor video in my view

[@JackSmith-jj3bi]

I cutdown a ratchet strap to hold my jack in place. 1/8” thick plate the width of the strap painted to match the cart.

[@paulwhittaker5195]

Add folding shelf to the back and another cabinet to the other side. On the inside of top box remove tools put plasma TV. In one draw put laptop. And on one of side cabinets put vice on other cabinet put mini lathe.

[@markpack9273]

Me personally I would put Castor wheels on that side box that way you don't have to worry about counterbalancing it

[@MoragTong_]

Wow...Disco Stu called and wants his Mustang back. Derp.

[@jimcrawford5603]

add chevy bowtie for reliability !!!! typical ford hackery !!!!

[@geraldluedke5696]

Just wondering why you choose to keep the side box to the front as apposed to keeping the front flush with the front of the cart. good job though.

[@SuperHemiDodge426]

I am now freakin brain dead from watching this

[@dcmorgan2004]

you should put the folding side try on the side of the added side cabinet, more work surface.

[@eagerlawncare3700]

Oh good .. coz I WAS hammered ... just not like I thought

[@briangray6372]

I don't see the stock wheels holding up to that weight. And I would have cut the side wall down 1/4" or so and cut the front of the side unit a bit so the top cover fit better.

[@HammerdownMotorsportsUSA]

nice I have pretty much the same cart and side cabinet I was thinking of putting them together like you did

[@BringItMuscleCars]

Hammerdown Motorsports I like it but if it wasn’t going in the trailer I’d have bought a tool box for a bit more money. Way more storage for the money.

[@christopherelrod8788]

If I ever need more space on my matco cart I might just run this first lol. If It doesn't work I'll just repurpose it for my hf tool cart at home

[@bfjou812]

I did the same thing on a cart I use at work. The thing I had to do was make a base for the cart and side cabinet. When I had everything loaded up and tried to move the whole thing, the side cabinet made it too heavy on that end and almost flipped the thing over. maybe your floor jack will balance it. Great job.

[@JustinSmith-ph1le]

I’ve seen several videos, where guys put the side boxes on their rolling carts. Maybe HF will change the side or make a different size, so they’ll fit without modifying

[@BringItMuscleCars]

That would be nice if they did that.

[@bestblackoutvideos]

should made it flush with the front of the cart , these fit perfectly on front and back of blue point tools carts ,looks better to

[@billyhill101]

Thanks red green 👍

[@BringItMuscleCars]

Billy Hill thanks for watching it all of the way through.

[@pl9915]

I used to stack my gloves on it but they're about to need a drawer to themselves

[@aeromech8563]

Fkn glad you don't do airframe mate shit ya butcher😳

[@leonh1402]

You should have cut the back of the add on then the front would be flush looks better thats what I did anyway

[@luissantiago147]

Really no Dremel available for those cuts? 😂

[@mechanicalmanny494]

Dremel for crying out loud , whatta shoe maker.

[@Jordan-ym5gf]

Couldn't tell you the last time I used a screwdriver on a car.

[@BringItMuscleCars]

Jordan Vasquez same here. My buddy wanted to buy a $75 set of screwdrivers. I was like for what.

[@Jordan-ym5gf]

@@BringItMuscleCars honestly. The only thing I use them for is mini pry bars 😂

[@bobbystacey5360]

Can you not just put a lil pressure on the jack to keep it stable instead of using a bungee ?

[@BringItMuscleCars]

Bobby Stacey genius idea. I never thought of that. Thanks for sharing.

[@keithwittman4741]

A door wedge.?

[@BringItMuscleCars]

Keith Wittman that would probably work great. Thanks.

[@alauto178]

Holy shit that never even crossed my mind. I wish they made a white end cabinet to match my white cart. Guess black it is! Thanks for sharing this video. Beats the hell out of buying a new box!!

[@packfannumber1]

Think I'd just buy the 44in tool chest. Has wheels. Bolt a handle to it. Put your jack holder on the side, done. I just think if you fill that end cabinet full of tools you're gonna run into that thing trying to tip over. But maybe I'm wrong.

[@BringItMuscleCars]

Definitely not wrong. And the side cabinet doesn’t hold that much anyway.

[@williammiller878]

A freaking hack job, bending and distorting the metal with snips and pliers. Try using the right tools for the job, a die grinder with a cutoff wheel would have been 10x faster and it would have given clean cuts without mangling the surrounding sheet metal.

[@BringItMuscleCars]

I couldn’t find mine and I wasn’t about to go buy another one to use for 30 seconds. It still worked and people could see what they have to cut to make work. Oh well.

[@CurtisDrew1]

How about just asking them to sell matching spray paint to match their Tool boxes????? Mine are Orange.

[@BringItMuscleCars]

I don’t think they sell matching spray paint at harbor freight

[@chadhanna7989]

It you connect the bottom with boit's you can put wheels on the end cabinet

[@privatename8888]

Smh that's a disaster waiting to happen. That Jack is going to flip the cart over and break your foot. To damn heavy. I have the same jack I have race cars. At least get the lightweight aluminum race jack.

[@BringItMuscleCars]

If you don’t like the videos move along.

[@yeagermcbipper9008]

found the guy who can't do sheet metal work. A 4 in cut off wheel, hack saw, a file, anything but a pair of snips to go through folded steel you mook

[@devonkremer4062]

Anyone know if that side shelf with fit the snap on krsc46?

[@johnyoutsey5490]

Need to purchase a cutoff wheel whith the purchase of endcab

[@m.t.v.7934]

DO YOU HAVE A LINK FOR THOSE BUMPERS?

[@Mowersplus84]

Oh my fucking word. Not another one.

[@Ceedub3406]

Tin snips? This guy doesn't even own a zing poofer

[@CanadianCharlie64]

That jack holder looks like a big waste of time and money to me

[@secalcavazos3204]

You definitely should have place the cabinet back further so the whole front was flush, looks like shit... Good job on the video.

[@BringItMuscleCars]

If I made the front fit flush then it wouldn’t sit flush in my car trailer. If I wasn’t using it in the trailer I would have made the front flush. I had to build it to fit my needs

[@class8garage308]

problem is you could have purchased the 44" series 2 cheaper than what you got invested in jerry rigging this set up plus its pretty much plug in play out of box skid

[@BringItMuscleCars]

Smart man. I totally agree with you. I really like the cart. The end cabinet is not very useful. For what I got the cart for it’s more useful than a bigger box.

[@y0gisdad]

I did the same for mine but I then drilled 4 holes into it and remounted my folding tray to the side cabinet...then I took the magnetic paper towel holder and stuck it to the tray.... now then you’ll have the ultimate tool cart

[@BringItMuscleCars]

y0gisdad I can’t disagree with that. I should have added it back on.

[@charlesmartin8596]

@@BringItMuscleCars might want to also secure the bottom of the chest to the cart

[@BringItMuscleCars]

Charles Martin I’ll probably end up doing that. For the most part the cart will be stationary in my trailer.

[@ClientGraphics]

Did you do the swivel castor mod so they all movie easy?

[@BringItMuscleCars]

ClientGraphics I did do the swivel caster mod. I really like that mod. I watch your videos. I really like them. Thanks for watching and commenting.

[@charlesmartin8596]

@@BringItMuscleCars with this mod please support the chest otherwise you will have to replace your whole cart

[@mikeaze423]

Just my opinion but I would of just put swivel casters under the end cabinet with a block of wood for a spacer probably to much wieght for those cart wheels with that jack

[@BringItMuscleCars]

When rolling it around on flat smooth ground you don’t need casters under the cabinet. It rolls nice and smooth.

[@matthewsalomone3800]

Dremel with a cutting wheel would make the cut easier

[@Jony1660]

Am I the only one worried about the whole side cabinet hanging from that little tiny pinch seem. I feel like overtime that thing is just going to bend and your cabinet is going to fall right off.

[@BringItMuscleCars]

Been on 3 years with zero issues.

[@keithwittman4741]

I like all the upgrade ideas, for the tool cart, but this upgrade?... just get a 40inch tool cart.

[@BringItMuscleCars]

If it wasn't for storing the stuff underneath it definitely makes more sense to 40 inch box.

[@coreymarrero]

Where you snag that Jack holder?

[@IDABAYAREA650I]

*Hey man I just subscribed I have the EXACT Same box and would LOVE to do this as a add on, because I don’t want to buy a full size tool box just yet, I look forward to seeing the Review and maybe adding the casters under the End cabinet? Hopefully you show us step by step how to do it because I NEED This in my life haha my box is getting a little cramped!!*

[@BringItMuscleCars]

IDABAYAREA650I thanks man. I definitely have more in store for the box. I’m going to do casters on the cabinet.

[@IDABAYAREA650I]

Bring It Muscle Cars *hell yeah! And maybe if you can give us Step by step Details like the Caster sizes and where to bolt where or make holes and so on and so on! , I’m sure I’m asking from a lot of other people too!*

[@TheLexiconDevils]

So for normal people who do things right,unlike this fucking hatchet job on the side cart, you take a piece of flat bar the width of the lip and use the top bolts of the cabinet and washers to offset the bar. Hang cabinet as usual

[@BringItMuscleCars]

you can call it a hatchet job I don't mind. That is a very good tip but how thick is that flat bar going to need to be? Also you'll need spacers because of lid of the cart.

[@stratosjeff7007]

is there a link to that jack holder?

[@MichaelSmith-xc6pe]

Use a freakin dremel tool or a larger cut off tool

[@Blynd_HD]

What is the part # for the black jack holder? Any I find online are either silver, or made out of plastic.

[@BringItMuscleCars]

That one is made out of plastic. I got it from Amazon or SummitRacing

[@projectbumblejeep4190]

What happened to your side tray/shelf? Will it mount to the end cabinet?

[@BringItMuscleCars]

Project Bumble Jeep you could mount it in the side cabinet but you’d have to drill holes in it.

[@johnny1556]

I like the idea of to Jack holder where did you pick it up at?

[@BringItMuscleCars]

Johnny 155 I got it from Summit Racing. It worked out great. I’m glad you liked that idea.

[@mrbogeygolf6946]

Great job! Cannot find that Jack holder on Summit Tools, any chance you could link it?

[@johnbailey2034]

You want the same color jack stands ? Buy some spray paint wow that was very hard to think of right ?

[@justinwoods240]

Too bad they were recalled lmao

[@evanmohn3075]

Has anyone tried to put the end cabinet on the side of the new Full bank box? Wondering if it would fit.

[@BringItMuscleCars]

I think it fits but they are different sizes.

[@Andrew-ui1xr]

Focus ur damn camera. Fkn aye man. Smh

[@blkmike1818]

if you mounted the side box flush to the front the power strip could be put on the back unless you need to set the tool box flat to a wall idk just thinkin

[@BringItMuscleCars]

I actually built this to go in my car trailer. So I wanted it to sit flush against the wall. Otherwise I would have flushed the front. If you did that then mount the power strip in the back. You could drill a hole to run the cables through to charge stuff with the lid down.

[@loghome7061]

What is that matching green spray paint?

[@tommater2724]

Flush the front and overhang the rear add sum wheels on the side cab for stability

[@BringItMuscleCars]

Tom Mater I choose to have it flush in the back because I mount it in my trailer. If it wasn’t for that I’d have it flush in the front.

[@dmckimmey1]

This is my first time watching your channel. I'm wondering with the type of work you do, the bada$$ Pony in the back ground that you would even bother with HF. I see you have Kobalt and Husky as well. I'm not judging at all. I think that is genius how you set that up. It obviously wouldn't take a genius to figure that the cabinet will need casters. That's a given, I wonder if the structure of the cart it's self will be able to with stand the weight of all the tools. Sitting in one place would be okay but once it goes into motion, weight shifting, if that maybe cause a big issue? Definitely liked your video!

[@BringItMuscleCars]

dmckimmey1 cheaper tools work nearly as good as really expensive ones. I need to save money on the tools to help mod the Shelby. Only so much to around. Why spend $100 on a tool when a $20 tool works just as well. That’s enough to buy race gas and a hotdog at the track. The cabinet may need wheels. For the most part it’s strapped into the car trailer.

[@shane3350]

@@BringItMuscleCars I'm the same way with my tools. My cart and most of my sockets, ratchets, my jack and stands, etc are all harbor freight. But anything powered such as my 18v/12v impacts, drivers, electric ratchets are all milwakee.

[@BringItMuscleCars]

Shan s I have a Milwaukee ratchet which is awesome. Then my 1/2” impact is Kobalt. That thing has been a beast. No complaints on that. I’ve never used the harbor freight electric tools. Not sure I will at this point.

[@shane3350]

@@BringItMuscleCars the only thing electric I have from them is the plug in angle grinder which I've had for years and works fine. A close friend of mine started using their new cordless 1/2" impact recently and it's been good to him. However it is larger and not as powerful as my milwakee mid torque. I've had to come break a few crank pulley bolts for him.

[@BringItMuscleCars]

Shan s my bet in a year or two they will be much better on all of the cordless power tools.

[@aux1z11]

If i was you I would put some wings and a train horn and a hayabusa motor on it.

[@BringItMuscleCars]

aux1z11 next mods coming up. Thanks for the great idea. I think Hayabusa motor might be to big though. Maybe a ninja motor.

[@andrewgarcia9841]

Don't worry about part number

[@jasonn2284]

With all those invested. I’d rather just buy a blue point tool cart.

[@BringItMuscleCars]

I might look into one of those. I need something that has better wheels.

[@kriskline7559]

10 lbs of shit in a 3 lb wrapper. Lol

[@adamduplin]

Better return those jackstands

[@Jmon45]

Bring It Muscle Cars. Is there a way to mount caster wheels on the side box??? ..... great video thank u guys

[@Jmon45]

I liked and subscribed.

[@BringItMuscleCars]

Thanks for liking and subscribing. I would say you can mount them underneath but it will take some fab work.

[@xrp861]

I did this like 5 years ago. Still wasnt enuff room.

[@BringItMuscleCars]

I agree. The side cabinet really isn’t that useful for the price. You’re better off just getting a 22 inch box imo.

[@josuejaime6018]

Seeing this now and they no longer have the green 14.5 cabinets :/

[@BringItMuscleCars]

That sucks if you already have all green boxes.

[@humbleorgins4125]

Why so many chrome sockets?

[@mattbrodacki4980]

be trick if you could get onto a carla cargo type trailers, but retro fit for your tool box. They run around with giant fed ex deliveries in NYC. Narrow low profile trailer goes on back of an e-bike or anything with ball hitch (I pull something similar I made with my mower around property to bring tools to machines. Could drive that baby right over to the car out on the track ;-). Thanks for sharing.

[@williamwaugh6050]

This is a good idea. Thanks for posting this. You talked about the color of your jack stands. How about painting your floor jack and jack holder to match everything else?

[@BringItMuscleCars]

William Waugh I’m actually just going to get the green jack from Harbor Freight. I think the texture of the jack holder won’t take paint very well. Thanks for watching. I appreciate the support.

[@gecko6952]

Just picked up one of these carts for racing superbikes. My cart will be travel to the race track in a trailer. You mentioned that yours travels in a trailer. How do you strap your cart down in the trailer? I assume you use ratchet straps, but how do you strap it in. With my current cart, I use “D” hooks on the floor and strap the hooks around the square steel tube of the Bluepoint cart frame. The HF cart frame doesn’t seem sturdy enough to handle being hooked and strapped. I was thinking of doing E-track on the trailer wall and strapping around the cart to the wall. Just wondering what solution you came up with. Thanks in advance. JohnV.

[@BringItMuscleCars]

I have two D rings on the wall I strap it to. It runs across the drawer and I have to slide the strap up and down. I haven’t had a problem with it moving or loosing up.

[@gecko6952]

@@BringItMuscleCars Thank you for the reply. Do you still do that even with the extra add on box that hangs from the right side of the cart side? I guess the bumper guards, placed properly, can serve as a protector from any rash caused by the straps going across the front of the cart. JohnV.

[@BringItMuscleCars]

@@gecko6952 I still do. The strap did wear some of the paint though. It’s not the best layout overall because it’s a lot harder to load and unload from the trailer.

[@privatename8888]

Smh why do you need a jack holder? That's dumb af

[@BringItMuscleCars]

It’s a mobile work station for my race trailer. You have to keep the Jack somewhere. But what do I know.

[@ohboah320]

If the front was flush you would only have one cut in the back.

[@BringItMuscleCars]

Bo B definitely. But I wanted the back flush because it’s normally in my car trailer.

[@Carlos-ip2ir]

Training the camera man

[@michaelthompson9127]

I think I would have made some standoffs to mount the side cabinet and added casters it’s going to be heavy on cabinet side when the jack is being used

[@BringItMuscleCars]

It sits fine. If you are going to roll it around a lot a frame under everything would help a lot. I originally built it to sit in my trailer.

[@michaelthompson9127]

@@BringItMuscleCars goog to know thanks for the video