How to Apply a Ceramic Coating to your Car!!! - VETERAN 9H

[@CleanandShineCarCare]

❗For more information about the steps to prepare your car's paint and to protect with ceramic coating, CHECK OUT THIS VIDEO!!! 👉 kzbin.info/www/bejne/bHqblXqXl76VmKc

[@mlackey9812]

In answer to Marv Woo frustration re: no 'explanation' of what is used and why: here you go I understand your frustration. I, as a tradesman completely understood/understand the products and the steps without the 'words' Let me give you some insight. 1st. wash your car, 2nd, use a 'clay bar' to scour the paint, 3rd. use a 'polishing compound' with a power polisher. It looks like he's using 2 separate grits of polishing compound or one, the first one, as a polisher and the second time as a 'sealer' ( a 'sealer' is a separate product to fill in 'Micro scratching' left by the polishing compound). Then and only 'then' does he apply the 9H-Mr. Fix auto ceramic coating. Read....a lot of prep before the actual application of the 'ceramic coating' And there you go....the 'tradesman translation' or at least what 'I' see.

[@nikolamin3548]

Thank you!

[@niknoks7638]

Great translation 👍

[@geoffwood6044]

I would just add, IMO after claying I would wash again to remove any residue left by the lubricant, most wouldn't need to use a compound (1st pass) and just use a swirl remover (2nd pass, I would then use a "tack cloth" (decorators use these), this will remove all residues, very important to do this before ceramic coating and NEVER afterwards (as this will weaken the structure of the coating), then use sparingly, the ceramic coating, some need a little longer than others but as mentioned, watch for the rainbow haze (glancing sideways along the paint), then buff to a glass like finish. These ceramic coatings are pretty good if you're not an avid car "detailer" ie waxes etc I also use ceramic coatings on side windows NEVER windscreen, the wife uses it indoors on the shower screen, so it really is a versatile product for not only car but house as well, use it on your house windows and you'll not get those nasty waterspots for a long time.

[@MrEye4get]

No idea why people thumbs down this. Great demonstration!

[@juansantos1614]

Because maybe just maybe those are really really good

[@enfield7123]

Just don my mokka again after 2 years still come out like new car brilliant product

[@bwilliam4023]

You have to wipe off what's left after polish, the ceramic coating only bound to clear coat. If you don't this probably only last for a year

[@bluesparky727]

Not my video but I will say ceramic coating will last about two years and properly protect your paint wax is simply a coverup for crap paint. When you use a product like this you need to make sure the paint finish is corrected. This means buffing and polishing the entire car then the car needs to be cleaned by hand w a wax and grease removing cleaner. Once the paint has been cleaned and polished then you can add this coating. This coating adds a layer on top of the clear coat where as wax fills in the existing scratches temporarily. Once paint is corrected apply the coating in a crisscross patteren evenly on the whole panel you can most the panel with water lightly to help spread the coating. Let this set up for about ten minutes longer if it’s cold and then lightly buff the panel with a microfiber if you doing an entire car simply start on one panel and work around the car until you come back to the original panel then use your microfiber. It is critical that the car is cleaned and washed between each step leading up the the wipe down with wax and grease cleaner

[@reno775nv86regal]

I missed the whole video. I just heard the music bumping and immediately started dancing. This is the third time I’m attempting to watch this video

[@mynsxt6]

Please focus

[@ronj5714]

Very relaxing to watch, but did speed it up to 2. Most enjoyable.

[@vladC02]

Hello ! could you tell me what kind of products did you use throughout the process? including the used polishing machine and sponges? I would be grateful

[@King_drew]

1: clay bar (the blue thing) 2. Microfiber towel 3. DCutting/ Polishing compound 4. Ceramic coating kit

[@elihucasillas7538]

Was there a polish in between?

[@TomLee-wz3ke]

Why did you miss the bottom left while buffing? OCD triggered....

[@WutichaiToemprom]

😅

[@WutichaiToemprom]

😅

[@SydneyEpoxysolution]

Most useful video I’ve seen very good thank you master

[@mihai0377]

Straight to the point ! All the others videos which are 25min long teach you nothing but bla bla ! This is spot on ! Well done sir !

[@LGarbac]

you missed one of most important steps, ipa/ panel wipe cleanse before coating

[@830983208]

was thinking the same exact thing

[@mtnmann72]

Complete fail

[@x-manroman2595]

Agree he don't know what he's doing

[@markgutsche5067]

Good eye...

[@sergeribeiro8704]

What is this step please ? Will it be the same work on a brand new car ?

[@tvanb8729]

I achieve exactly the same effect without the powertools :)

[@gogomagog3584]

How??

[@mgshizzle2213]

No u don't this guy obviously never detailed anything it would literally take u days what a machine can do in a few hrs

[@muhammadfaridhakimi3728]

First two and three what step ? Three ceramic coating right ?

[@illusionzauto]

I don't mean to bust your balls buddy but was the surface wiped with a prep spray after polishing or was the polish like a primer polish that has Sio2 allowing you to go right to the ceramic coating? Only asking because ceramic coating will fail if there is any polishing oils left behind and missing that key point will have a lot of people wondering why the coating didn't last.

[@kishore2460]

Please can you tell me what were the other two applicants name before you used the ceramic coating

[@eddietabartalibong1040]

Helo po sir ano po Ang clasing chimicals pwede gamitin sa ceramic coat yong pag paint coreccetion kailangan ba mag step 1 Hanggang step 3 sample hard compound polish paint protect last ceramic coat pls reply me dogang kaalaman po Isa po Ako deteler ompisa palang mag comic coat

[@jonwear9791]

Wow, a big difference.

[@elcomandante5160]

To make it even better claybar the vehicle after washing then rewash the vehicle, and proceed with these steps👍

[@marfigue777]

how many bottles of the product do we need for a whole car?

[@muneebaraees3032]

Can this glass coating be washed away with soap? Because I would wanna think for getting my car washed

[@Beto_proanimals]

hello, how many seconds do you have to wait to remove the ceramic?

[@shaikhirfangaming6902]

2 min

[@marcosantoniogoncalves7718]

Bela demostração.... Profissional excelente...tpo

[@gueriog.9745]

What are the revolutions on that machine?

[@Bzr228]

Most of the videos i watch uses a degreaser before applying the ceramic coat since polishing compound contains natural oil in them. So... can you do without the degreaser?

[@1990paulieboy]

pol pol personality I always use an alcohol + water mixture! Basically, a ceramic coating is pretty much a layer of glass on top of you car for possibly upto 3 years there is no real “maintenance” after you apply it a good rinse is enough to clean your car after it has been coated, there is no polishing or waxing the ceramic coating that’s why a lot of people like it me person don’t use it on my own car because I love claying, , cutting, polishing, waxing etc... but this is why you do it before hand (just clay bar, cut, polish) no need for wax as the alcohol mixture with just remove it anyway... but basically if you have a hologram or water mark on your car or some kind of imperfection on you paint and then do your ceramic coating you’ll seal it all under the coating, the alcohol mixture removes holograms and stuff so you don’t need to worry about it after the coating goes on. Once it’s on its on!! It’ll take come very aggressive cutting to remove it and in some cases, sanding!!

[@Bzr228]

@@1990paulieboy Thank you very much for your help!!!

[@caseykittel]

Did you end up with a permanent imprint of a square on the hood? Off center? Seems like a risky demo.

[@joegolfer9372]

Is the little blue bottle the actual ceramic?

[@rajeevmaharaj47]

Can u apply the ceramic coating after just washing ?

[@Vanlifecrisis]

If you want it to look bad for the next 2 years. Unless its a brand new car from the factory.

[@bengong105]

Hi I am car spray worker in Penang, wax coating or water coating better¿

[@AbdulHameed-dp3hq]

very nice . detailed method for ceramic coating. Really appreciable

[@VijjisBeautyTips777]

What the chemicals you using in machine

[@MDB-amandrinksbeer]

Clay is abrasive by itself. Also when you pick up small particles they scratch paint for a while.

[@pd9888]

y u gotta flip it, remold it frequently, otherwise ur scratching the hell out of uer car, lik htis guy. why would you polish pre coeramic coat ? huh ?

[@King_drew]

Only a rookie does not fold it in itself to create a clean surface for claying.

[@sezziek1]

Hello, a complete noob here. I want to do the same for my car. I understood the end bit with the Mr Fix, but please would you explain the stuff you did before that and what products and equipment you used. . Sorry, I’m learning from scratch and don’t know much about this stuff. Many thanks :-)

[@MagicTheKrakening]

Mr fix is trash bro

[@andrefrank6659]

Mr fix isnt trash people just knock it cause if the price point it works good it's all about the prep on the end. I been detailing since I was 8 and I'm 30 I use cermaic pro I'm certified by ceramic pro and glass parency and will be by g technique when I finish my training but Mr fix is a good DIY product you can get a good year maybe two out of the coating if you properly maintain it.Get you a sio2 infused soap wash only with that and after you was get you ceramic booster if you search it you will see it they are even selling ceramic sprays at auto zone on store shelves now. Just make sure you wash with sio2 and spray the booster after at least every 3months unless u get a good booster than u can make 5 or 6 month

[@fabridee]

ilike what you did, some people talk so much bullshit...iwas in the car industry for over 20 years and iknow when people talk too much shit. and you did just a great job 👏 👍

[@antonisrousias2790]

How much bottles do you use for a small hatchback?

[@kevinwilson6270]

1 bottle

[@gioviardesigngraphic8403]

what kind of products did you use ?

[@andriwcuervo9023]

Buenas tardes , deseo más información sobre este producto , tienen algún contacto en Medellín Colombia, gracias

[@herbertmartinez7639]

How bout an orbiter is it affective too?

[@mrnoob0219]

It’s easy to install in home??

[@zy4498]

Can apply on windshield?

[@jeromeoxida8076]

What is the 1st 2 before the ceramic?

[@mankoesamuel1736]

I think it's machine compound and machine polish or maybe even machine glaze...

[@skysvloggaming539]

Hi how long did u wait for the coating to take effect?

[@mohdsyafiq7561]

Hello ..something not right on video..since title is about testing 9 H coating...so u should wash full bonet...and also wax full bonet...then put tape...and lastly touch up with 9H coating..if u do like that..sure so big difference on ur bonet...

[@ptheledge5390]

Where’s the IPA wipe down to make sure any remaining polishes are gone?

[@redbaron1954100]

Once ceramic coat applied how long or what indication did u used to wipe off and how long after applied and wiped would u wait to apply another coat

[@mankoesamuel1736]

Approximately 3 months.

[@ONI1013.]

You forgot to remove the polish with an IPA wipe before applying your Ceramic Coat. 🤦🏻‍♂️

[@Jayg80]

GHN1013 so glad it’s not just me that picked up on that!

[@rickyreid3520]

Do u wax cars like him also

[@raffoasus4086]

Dopo quanto tempo hai passato il panno per rimuovere il coating?

[@odevious8081]

Hurry up and remove the tape it doesnt take 10 minutes

[@edgar8016]

Hola. ¿Después de aplicar el cerámico recomiendas aplicar cera?

[@michaelrivera1966]

NO, vienen otros productos para usar como la silica o hidrosilex despues de haber usado la ceramica para mantener vivas las propiedades de la ceramica es un mantenimiento requerido por todos los manufactureros de ceramica.

[@ziman8309]

how long did u wait until u wiped the excess coating?

[@DJSEXYNONSTOP]

Wait until it oils up, basically you can see it forming tiny drops :) and would not wait more than 2 min

[@momentumtintdetail]

I have the red “hyjet” brand polisher. 21mm looks very similar. Nice video!

[@ntdtv]

Hello, I wanted to kindly remind you that I sent you a message regarding your videos. Please see my previous message. I am looking forward to hearing from you.

[@saudnasir884]

No 😂

[@raffymagaling2516]

hi! can you tell me the stuff you put using the da buffer and what brand is thos coating

[@stefanmodigh7897]

Is it possible to apply on a cellphone made out off glass for like extra protection?😊

[@hosmanygaitan5393]

Hi do I have to buff the car before ceramic coating even if the car is almost new pain

[@brycechow9178]

No unless there is any swirls or scratches then I would not polish. Just a clay bar and wax remover or 50/50 water and alcohol spray.

[@TheCowgirlNiamh]

I was hoping to coat my cars this summer but we're still on a water ban here 😩 I'm getting very cranky 😂

[@1188clean]

do what you want. land of the free

[@MrCoalcracker79]

I've never experienced a water ban. Sounds shitty.

[@Fightfitzw]

Hi, what machine are you using?

[@eriksestak6872]

Can i apply it outside?

[@dhaneshkumar7557]

Does buffing affect thickness of color?

[@redroris4906]

how to remove the white line around the box coating on that car ?

[@ferreiraolive]

good night. Congratulations on the video, can you tell me what products you used in the video?

[@marcjohn7416]

Is that an angle grinder?

[@hiazn69]

What's the difference between the 2 compounds you used on the buffer?

[@richardjohnston1818]

Different levels of cutting

[@dcarrstar7719]

The first pad was more aggressive with a compound to remove defects while smoothing/ leveling the paint. Buffer trails and a haze is left after this step. The second pad is a less aggressive polishing pad with a polish to remove the buffer trails a bring the paint to a high gloss shine. Usually a ipa or wax and grease remover is used to remove all oils from correction before adding a coating, sealant, or wax so that they will adhere better. But he skipped that step in the video.

[@AAldr]

Very professional vedio 👍

[@yonayhernandez912]

Hey where are you located??? Im intrested in having this done my car..

[@TheCreationman]

You’ve just convinced me 😱 guess I’ll be ordering some soon!

[@wildimpo]

If you really want a trick super shiny look, wet sand the car with 3000grit buff then do this ceramic coating

[@pootershnitzel]

Same applies to painted wheels?

[@FullTechBeat]

Hi, i'm getting some parts painted bij a professional, after that i want to apply the ceramic coating, do i have to polish the newly painted parts?

[@lukoitautodetailingllc3124]

The new paint requires time to 'breathe' the vapors out. You do not want to ceramic coat it immediately. It would be wise to do a light polish on the painted parts, IPA wipe down and then apply a ceramic coating.

[@junsamaniego9695]

Ke nombre todos ke produkto amigo gracias

[@rodelflores7443]

How many days of work for a ceramic coating

[@manojkumar-sj2rd]

Good video

[@gc9n]

Εισαι ευχαριστημένος με τα Etalon? σε σχέση με τα meguiar είναι παρομοιο-καλυτερο?

[@MrMombip]

You should have polished two squares and apply ceramic coating only to one of them. I suppose effect would be very similar. Polishing itself, gives you the same behaviour. I've tested this "coating" and I'm really sorry to say, that it seams it does not work.

[@marioskosmidhs9454]

Dear sir i have the same bulle polisher. I am not proffesional, please what is your opinion and expirience with this machine?? Thanks

[@noufalcm8781]

Hello how much mechine rate?

[@lifewithtravis7091]

Car gained 20hp with the ceramic coating

[@MercilessMrBrooks]

Are u seriously shit talking ceramic coating as a ricer thing to do? Wtf

[@mdetailing1336]

No ipa ???

[@garland3438]

Is also right to apply on glass and mirror s to keep water out?

[@simonghantous8034]

No u cant. There's ceramic coating for windows. The name of the product ceramic Rain.

[@luisenriquemartinezherrera6644]

Usan siempre los carros con mejor pintura usen auto con estado normal de pintura para saber si funcionan o no el producto

[@yannickmarsolais8982]

Are you using the same applicator for the entire car?

[@ntdtv]

Hello, It's Peter from NTD Television. Your videos are great! Our mission is to uplift the world through sharing Truth, Hope and Humanity. We would like to upload your content to our media pages. Can we have your permission to do that? Thank you.

[@boyssansiro5614]

No🤣

[@manojjain9761]

Where can we get this solution and at what price?

[@hardyb311]

Ebay or Amazon

[@mshnamteeskol9861]

Before coating, can we using all type of wax?

[@Abdullah..S]

No off course

[@loveritobeatsmusic1131]

excelente video 😷👍🇵🇪🇵🇪

[@ilmarsdzenisflorida]

Nice, thanks.

[@karaju6961]

How to remove whater sports on car glasses

[@louie8368]

Is it okay to put a PPF on top of ceramic coating?

[@sundeepbhawsar]

yes you can

[@prstravelstips8523]

How much price this chemical

[@MrHalomaster8]

Wash and clay can I Used Ardex micro 1 compound and Ardex wax apply 9H to it would that be okay.

[@joemama2907]

Avoid waxing before ceramic coating you’ll get high spots. This guy in the video isn’t a professional

[@vinayakgawade8057]

Nice video...

[@kevinkoppes1068]

Have fun getting tape residue off!

[@0zakaMarek0]

It's not a glue residue. It is a polishing compound that managed to get under the tape. It would have disappeared if he wiped the surface after de-taping.

[@vaporionesteticaautomotiva5722]

how long will during this coating?

[@ajiempi]

Can ceramic coating be used on front glass car?

[@mankoesamuel1736]

You can use nano ceramic for glass.

[@deklang1874]

i want buy how much? i from malaysia

[@Yunggeck]

what song is this ?

[@NasirHussain-wt2si]

Very nice explained 👍

[@1keykneedeep]

Suppose to use damp applicator to apply ceramic product. Let set up aprox 10mins and wipe with clean dry microfiber towel. Let cure 2-3hours and no washing for 24- 48 hours.

[@-ANguyenthikieutrang]

Can I buy it back to my country?

[@sarathsamuel201]

In chennai how much cost for R15 v3