HOW TO ASSEMBLE 16 IN OSCILLATING STAND FAN UNBOXING AND REVIEW

Check out my amazon influencer page www.amazon.com... Become a patron member / youtubejarred333
Check out the merch redbubble.com/p...

[@jeanstrope7019]

I could not have done it without your help. Thank you!

[@devynglass3781]

Omg thank you!!!!! I couldn’t have put this fan together without you!!!!!! God bless KZbin for the people who don’t understand the instructions on paper!!

[@coreycoleman980]

*I like how quiet it is, how well it works and **Fastly.Cool** , This was perfect to help air out a guest room and to use instead of AC when I only want one room kept cool. Works great!*

[@derrickwilson648]

I don’t know who you are or where you are from but let me tell you this. I have never had fun putting a damn fan together but you had me laughing through the whole damn video while helping figure out how to put this damn thing together. You could be a damn comedian. I was in tears. 👍🏾👍🏾

[@terissashirley8380]

Thank you so much , I couldn't figure this out but I also cannot figure out how to put that black piece in the very middle that says climate keeper to snap in mine is not already in there

[@ljjuiceman4922]

Same here mines ain't working either the middle part keep falling down

[@Ddeath.Eaterr]

Omg thank you so much! I was beginning to get pissed at this fan but the video helped

[@georgeharris267]

It helps when U read the instructions and that the threads are left handed

[@darkviolet1221]

It helps when you buy a product that needs to be assembled and they actually give you the instructions

[@iyamwhatiyam547]

If both fan spinners were clockwise - they’d eventually cause themselves to loosen. It’s science ;)

[@breebree6587]

The instructions we’re so useless, thank you!!

[@robinanncaron]

It would've been a lot easier if you were sober. 🙄

[@corycg1956]

😂

[@raccoon681]

he's still more sober then some of the people working in construction iv seen

[@z33andme71]

LOL... I just bought 2 from Amazon & it came here yesterday but FedEx & Amazon didn't bother to send me an e-mail until 1:15 AM telling me it was here. Then FedEx didn't bother leaving them on my porch, they left them outside of my fence at the end of my driveway so I thought it was stolen until this morning... Freaking asshole!

[@the_real_drwhoroblox1935]

This comment as well as these replies made me balk when assembling a fan for my bedroom.

[@marysweet3093]

It never ceases to amaze me how many ROTTEN people there are in this world. So ungrateful! I thank you sir for helping me assemble my fan.

[@sabrinadean2347]

Thanks .. This helped me. My rob didn’t have a hole but fan still works

[@Drgn-vs2kw]

The instructions are terrible so I'm watching this

[@AMDRADEONRUBY]

You dont need instructions come on...

[@Drgn-vs2kw]

@@AMDRADEONRUBY I had a polarwind it took hours to get one part on

[@nancyfischer4875]

@AMDRADEONRUBY you do bitch

[@krystencoy7226]

They're definitely terrible. I had to look at the picture on the box and still don't know what a piece is... so here I am

[@SuperDenise128]

It screws on counter clockwise instead of the normal clockwise.

[@gbeans9213]

Dude learn how to shoot a a video or have someone shoot it for you you're not even showing what you're doing

[@layah28]

My metal piece doesn’t even have a hole and the other end had a black cap on it so I can’t connect the top fan to the base 🤦🏾‍♀️

[@Doncar97]

Some problem

[@ginadistefano3055]

@@Doncar97 seriously. What the fuck?!? How do you put this fucking thing together?!? Do you take the plastic piece off??

[@Doncar97]

@@ginadistefano3055 kinda hard for me to explain

[@angelroddy3525]

Mine is the same way, did you get it fixed? If so, how?

[@nikkiwatson5194]

.

[@sharene4362]

POS fan is what it is

[@ren8096]

Thank you so much

[@jamminjoe44]

The instructions were terrible!! Thanks for your video, now I can take another crack at it and get it right lol Edit: I have the 12 inch version.. I think the damn thing should be fully assembled right out of the box.

[@melmelv5652]

My fan is not working but, when I lift the front grill up my fan works?

[@AnabMohamed-ld8vh]

Thank you

[@jessicamassey829]

The end caps dont fit

[@minxkapinx4ever]

Thanks so much!

[@superbrofusion9059]

For some reason mines has a fuse 😒

[@T小伙伴]

SuperBroFusion 90

[@storyofmylife7080]

Mines or mine?

[@savagebaby326]

You need to do better on your video because you couldn't see what you was doing

[@xmarksthespot8216]

So how do you adjust the height? why is piece under thumb tightener threaded. It seems screwed up.

[@iyamwhatiyam547]

Thanks !

[@bradykalman4781]

Well when I turn mine on the back shakes so much it sounds like a jet fan is in my room

[@iyamwhatiyam547]

Yah put it together wrong. Look at where he puts the 2 tightening things.

[@BAYLEY713]

What if the pole has no hole when screwing on main unit into place

[@queenal7710]

Same problem -one part is thicker of the tube and I don't know which way to fit it. It's too thick on one side to fit either side

[@layah28]

@@queenal7710 same with mine

[@cecilezechman9874]

Same no hole

[@sugainhu5444]

Feels like a dad sendinf you a video from college bc you dont know how to do shit by yourself Ps im the dumb daughter. Thank you

[@lynettethompson1284]

Mine came without the black ring, so i cant even connect the fan part correctly...kept trying to figure out what was wrong & then came upom your video & figured out why! 😂😒 Safe to say, I will NEVER purchase this fan again!! 🤞🏾

[@maxwellfogleman4187]

mine came with missing parts fml

[@savianbattle]

Thank u!

[@briannaderby459]

Uhm my pole has no hole …..

[@Bobbythefanman]

Wow you are rough with that fan

[@ethann1986]

0:51

[@Mk-bv4ee]

Thanks bro

[@rickybrown5817]

You are fail how to build the fan

[@robinanncaron]

He started at the last step. I think he was drunk.

[@angeliquegerbers1684]

Looks like comfort zone fan

[@joanmorales8332]

its not it looks like it is a comfort zone fan

[@buttersnapswright126]

Looks like a ocsclating fan to me

[@brendagordon4600]

😑😑☹️☹️

[@whistleblowerlouisiana4699]

This guy is a over the place... no help at all

[@daleamathis6620]

Too wobbly

[@daleamathis6620]

Could not get the metal piece and bottom of pole to tighten

[@DavidFales]

Worst. Assembly. Video. Ever.

[@lovelyt2107]

Why leave out important parts of the video? How’d you get the little cap off you didnt even show that