I have no idea how he doesn't have more subscribers, these videos are top notch! Bought one of his udemy coarses ass well👍
@geespeed76453 жыл бұрын
It's the irritating boink.
@basashanker19653 жыл бұрын
hi i faced all these problems.now i realised the importance of your video.
@djlotfiwah10 ай бұрын
i like your videos, simple and clear . thanks
@GTRGTX9993 жыл бұрын
Very high quality video! Everyone making a crossover should watch this! Thank you!
@greenbeginner92213 жыл бұрын
I'm trying but he left me totally in the dust. I have no idea how the drawing at 4:22 turned into the final product. Is there some kind of explanation code that he didn't show?
@jbarelds784 жыл бұрын
Very nice tutorial. I follow pretty much the same procedure, but never use the screw terminals. I just solder some wires directly to it. The rubber gaskets is a nice tip. Until now I just screwed them to the inside of the box with some 5mm long M4 nylon washers in between. Never had any issue with rattles, but your method does make sense to me.
@guitarguyf162 жыл бұрын
Such a helpful video. Thank you so much!
@mag2903 жыл бұрын
Even better, no terminals or clips, point to point wiring. Twist the wires together well then solder. Use High purity copper wire, preferably solid core and Polyethylene or P.T.F E wire insulation
@tensorprodukt3 жыл бұрын
Really nice Tutorals!
@southerner662 жыл бұрын
Years ago I used some hot glue to lock down capacitors, and when I came back to check on them, I found that the speaker vibrations had caused them to pop loose. There are other adhesives that work much better. You can still get the parts off if you have to, but they will not loose their grip the way hot glue can.
@bailey25172 жыл бұрын
do you think wood glue woud work if i stick the capacitors on mdf? edit: or would super glue be better?
@ekimandersom4478 Жыл бұрын
@@bailey2517 Wood glue is for wood, nothing else
@niharadawade44424 жыл бұрын
Perfect explanation and demo..!
@olobiksnagol21784 жыл бұрын
Thanks, I've learned something with every video. I'm going to have to make a change to the inductors on my last crossover, one will have to go vertical. Thanks again!
@greenbeginner92213 жыл бұрын
I'm totally confused! Do you have any idea how he translated the technical circuit drawing at 4:22 into the reality he laid out at 8:36? Is there a code for translating one to the other? They look nothing like each other.
@olobiksnagol21783 жыл бұрын
@@greenbeginner9221 The diagram at 4:22 represents the desired circuit, at 8:36 he's showing the practical application. Often when I'm designing a circuit of any kind I'll draw it out (CAD or paper & pen) so I understand which components I need and how they're connected. When I go to implement a circuit the space available dictates how the circuit will be manipulated to fit, but the original drawing still dictates the connections which I must make. I will also breadboard circuits using multiple breadboards to test them before implementing. If this doesn't help please reply with details which are not clear.
@greenbeginner92213 жыл бұрын
@@olobiksnagol2178 Here's my chief point of confusion: You say that you use the schematic to determine how the components are to be connected. That's what I'm missing. How do I determine those connections? Here's an example schematic: It's the first image called Crowbar Circuit www.allaboutcircuits.com/technical-articles/understanding-schematics/ There's a horizontal wire running across the bottom from 0V on the left and Load on the right. There are four dots on this wire. So, that tells my mind that I use a razor blade and expose the metal of that wire in four places so that four vertical wires can be soldered in those four locations and the order of events is maintained. But maybe there is no order of events. If that is so, I can skip a lot of the wire stripping and connect the ends of all four vertical wires In a single junction along with the point called 0V and the point called Load. Which one is correct or am I totally misunderstanding?
@olobiksnagol21783 жыл бұрын
@@greenbeginner9221 The order of events should be maintained, your example," Crowbar Circuit" is pretty straight forward. You could indeed use a razor, strip the wire at the points indicated, and solder the components in the order shown, and the circuit would function as designed. Connecting all of the components to two junction points OV and Load would result in a circuit that will not provide the expected outcomes. As far as not understanding the circuits, you are doing the right thing, asking questions. I've learned by asking questions and making mistakes, many mistakes. I still consider myself a rookie at the age of 65. I was in education for 37 years and when I retired I decided I wanted to make my own speakers, I'm learning on the fly. I'll do my best to answer questions, I just hope Marius will jump in if I make an incorrect statement.
@greenbeginner92213 жыл бұрын
@@olobiksnagol2178 Thank you for your reply. Your explanation is the most reassuring I've heard over the past 30 days of asking around. I have posted questions to Marius on this video and he basically told me to go find some other website to answer my questions. I think they are a little too elementary for him. I am planning to put together a pair of GR Research XLS Encore Loudspeakers. We will see how well I do. I am 61 years of age myself. I took Electronics in school and could make zero sense of it. However, I guess the school just didn't want anybody to stick around so I was given a passing grade and was pointed to the exit door. Welcome to American education, right?
@harshavardhanreddy24634 жыл бұрын
Great see u agian ...
@berkayu3 жыл бұрын
Hey! Love your work and learned a lot from your online courses! Please keep going! Cheers
@kcleach93123 жыл бұрын
your voice is very relaxing!
@WeBuild4Life Жыл бұрын
Dumb question - what is your preffered way to wire the speakers to the terminal? Just wedge and screw it in?
@thomasschafer72685 ай бұрын
Very good tutorial. But Silikon is better than hot glue. Gets hard an doesn't fit!!
@Schjoenz2 жыл бұрын
OCD here. hahaha. I don't care if it's inside or out, Seen or not as long as it is looking great and sounding greater.
@kwacker1323 жыл бұрын
I don't know if you did this but I use DATS V3 to check the values of all my components beforehand. Also I sleeve my component leads and mount the board on rubber stand offs to the box.
@AudioJudgement3 жыл бұрын
Measuring the components is a very good habit, especially if the components are cheap ones.
@crossoverchef11 ай бұрын
cool
@ericschulze56413 жыл бұрын
Hey you can use brass screws
@jaxmg10 ай бұрын
how do you calculate the crossover...are there any formulas or something?
@AudioJudgement10 ай бұрын
You just need to measure your speakers inside the box (acoustically and electrically). You load those measurements into XSim, which is a crossover design app, and you model the crossover design there.
@Punjabi-Cyprus-ton-Pb109 ай бұрын
Can you tell me all components name and number bcz i want build crossover. In my country not available like this crossover plz tell me names and numbers off all components. I’m from India PUNJAB.
@jcruiz492 жыл бұрын
Hi great work but I have a question is this something I should use even if I have a dbx driverack 260? Because it does have a crossover but I have a feeling adding this to each of my mid and high frequency boxes would give me a better sound
@nemoaspieman3693 жыл бұрын
I am new to your channel, have subbed and have found your videos refreshing. I am planning to build a Passive 4th order High Pass filter for my tweeter, which is able to play down to 1kHz, and thus I plan to have the signal to be attenuated to 60dB by 1kHz and be at 1.4kHz at 83dB, basically filtering at just below 1.6kHz. Is there a reason why a 3rd order is better suited as a High Pass filter for a tweeter like mine? I have read that when it comes to the phase difference between 4th and 3rd order filters 4th orders can cause resonance, is this correct? I am not 100% sure if I am on the right track and would like to save some money if a 4th order will cause the tweeter to sound weird, but I really like the steep slope, so hoping it is acceptable. Furthermore, I plan to use the following components; Mundorf capacitors Mundorf Air Cored Copper Foil Coils CFC16 (inductors) Mundorf M-Resist Audiophile Resistors Which will cost me a total of $250 for two High Pass Filters. I am happy with the budget but prefer to not waste money making a mistake, especially if it is a blatant one. Thanks for sharing your knowledge.
@gtaveditorvids67763 жыл бұрын
Hi there . I have seas C18RNX and seas 27tdfc... can you tell me what caps and inductors I need to make a good network for these drivers . I have them in a bookshelf design front ported,,,
@AudioJudgement3 жыл бұрын
Without measuring your drivers inside your box, you cannot design crossovers properly.
@davide9920 Жыл бұрын
Enjoy your video , where do u find the speaker files frma, zmd, I watched your videos also on Udemy, thanks
@AudioJudgement Жыл бұрын
You have to make the measurements yourself. Files provided by the manufacturer are not useful because the size and shape of your enclosure changes the response considerably.
@davide9920 Жыл бұрын
@@AudioJudgement thanks do u have a video on that ?
@AudioJudgement Жыл бұрын
@David E Well, you said you watched my Udemy courses. Acoustics 201 is the one with acoustical measurements.
@davide9920 Жыл бұрын
@@AudioJudgement ok I will check that again thanks
@extrap513 жыл бұрын
Hi can the conductor be connected from any end or is there a in end and a out end, thanks
@AudioJudgement3 жыл бұрын
If by conductor you mean inductor, then yes, you can connect them at whatever end. Same for resistors. And the same for capacitors if they are non-polarized. If they are polarized then they have an actual + and - and you need to be aware of that.
@extrap513 жыл бұрын
@@AudioJudgement thanks for the reply 👍
@ericschulze56413 жыл бұрын
You should paint the board with a non conductive flat black paint applied in 26 mil. Layer's measure with a mitutoya model xc34116 if you don't have one a model x 34873 will work if the layers of paint exceed . 002 redo it until you reach the desired tolerance after you do this you may need to tweak it depending on what kind of paint you used
@ericschulze56413 жыл бұрын
By the way you are the best one out there just making fun of the people who think they have reinvented proven scientific formulas that are bound to the laws of psyics
@greenbeginner92213 жыл бұрын
How did you translate what you have drawn at 4:22 to what you have drawn at 8:36? They look nothing like each other. Are they really for the same crossover?
@AudioJudgement3 жыл бұрын
Yep, it's the same thing. On the circuit diagram you have the amp (input) on the left and the speakers on the right. On the actual crossover (and that piece of paper which I used to sketch the position of the components) you have the input and the speakers all clumped up on the right side. You can imagine that I have to rearrange the components. The connections are the same, the position of the components is different.
@greenbeginner92213 жыл бұрын
@@AudioJudgement So, on the 4:22 paper, you have a wire running from C1 to C2. But dead between them you have a wire going straight down to L1 . I didn't see you strip a section of wire between those on the video. How did you connect a wire between C1 and C2 without doing that?
@AudioJudgement3 жыл бұрын
@@greenbeginner9221 If you are asking why is there no wire between C1 and C2 ... It's because you solder the components directly to one another. You only use wire when absolutely needed (when the components are too far apart).
@greenbeginner92213 жыл бұрын
@@AudioJudgement I'm confused as to why you have two different drawings. If all three go together, why not draw it that way in the first place with everything in place the way you're really going to solder it together?
@AudioJudgement3 жыл бұрын
@@greenbeginner9221 You can't really skip the "reality" drawing as some components are large and you need to know how they fit before drilling any holes. Also, you need to be aware of inductor orientation, which is not a thing in the circuit diagram.
@merchantier42194 жыл бұрын
Oi mister Marius, sir, plis teach me to make a nice sounding speaker from scratch. I give you many kk :)))
@ericschulze56413 жыл бұрын
No No no you must use glue made for the space shuttle all other glues affect the coefficiency of the translateral vibratory effect
@wood-metalworkshop29433 жыл бұрын
На русском есть? Привет.
@ericschulze56413 жыл бұрын
NEVER use wire underneath because crappy copper foil boards are much better
@ericschulze56413 жыл бұрын
No No No you can't use a terminal block unless it's gold plated even then they should be made of solid gold
@ericschulze56413 жыл бұрын
OH no sacralidge you made it too simple your supposed to keep the ametuer confused you broke the rules
@greenbeginner92213 жыл бұрын
Well, he succeeded in confusing me. I must be a grade a amateur!