I polished my pistons and honed the cylinders. I recommend replacing the rings and oils seal. you didn't look at the oil seal holes mine were clogged so I drilled them out.
@PeterFinnTheCarDoctor9 жыл бұрын
+JJ Slay Good work !
@dbest1aVlogs8 жыл бұрын
Just put in new piston rings on my burning oil, running on 3cylinders chevy prizm (corolla) . God that was a feat got 3 done .. 1 still not done . Also with the piston compressor, to loosen put the Allen key in, turn to tighten slightly then press release mechanism , Then you can turn the Allen key to loosen. Great video, a big help . Thank you .
@PeterFinnTheCarDoctor8 жыл бұрын
You are welcome and Thank You for Your feedback. :-)
@dbest1aVlogs8 жыл бұрын
Anytime. I had the same issue of the top ring not going in.
@ashystyle6 жыл бұрын
How much should replacing all the piston rings and oil seals cost at a garage?
@PeterFinnTheCarDoctor6 жыл бұрын
About 1000 US $
@andreipopa97856 жыл бұрын
I like your video
@wearediffrent5 жыл бұрын
why did you use dirty pistons buy new ones. 3rd ring looks very bad.
@PeterFinnTheCarDoctor5 жыл бұрын
Ok
@rogerjemiera37844 жыл бұрын
How much the piston ring gap master
@lawrenceasigri94823 жыл бұрын
I hope this piston rings gap clocking is only good for 2Az engines
@PeterFinnTheCarDoctor3 жыл бұрын
Good 👍😀
@freepalestine40494 жыл бұрын
Kotor yela hodoh😂😂 TQ info
@bobbarnaby32984 жыл бұрын
your replacing that filthy piston in that engine !!! how about the ring lands ?? and the bottom of the grooves !!! that piston is covered in old burnt oil on the out side of the engine ... there is only a few thousands of free play !!! and the install!!! the piston???!!!... look at the filth on that piston!!! .... back to school buddy!!! wow!!!! ....
@blazinown13334 жыл бұрын
You should have changed those rings.
@PeterFinnTheCarDoctor4 жыл бұрын
Hi and Thanks for comment. 😃👍
@geojor8 жыл бұрын
thank you Peter ...
@PeterFinnTheCarDoctor8 жыл бұрын
And Thanks for great info! :-)
@chrisjohnomnia10 жыл бұрын
kiitos
@PeterFinnTheCarDoctor10 жыл бұрын
Chris John Thank You for comment.
@chrisjohnomnia10 жыл бұрын
Mä opiskelen auto asentajaksi Omniassa. Aikuisopistossa
@zackyzakkarov23896 жыл бұрын
@@chrisjohnomnia pidän hänen elokuvaa paljon. Hän voi puhuu englanti tosi hyvä.