How to assemble ERA // it's FPV 5" Freestyle Drone 2024 // ASMR

Parts used
Frame: it's FPV ERA
Motors: T-Motor x it's FPV it's 2306.5 1750KV
FC: T-Motor F7 Pro Full Function 30x30 Flight Controller
ESC: T-Motor F55A PROIII 3-8S BL32 ESC
VTX: Caddx Vista with original DJI Camera
RX: Radiomaster ELRS 2.4GHz RP1 V2 Nano
LIPO: Tattu R-Line 1050mAh 95C 22.2V 6S1P
PROPS: GEMFAN F4S - 5.1x3.6x3
Action Cam Mount: DJI ACTION 2 20°
----------------------
TIMESTAMPS
Unboxing 0:00
Frame Assembly 1:04
Cage Preaparation 6:00
ELRS Antenna Preparation 6:46
ELRS Antenna Installation 7:43
Cage Installation 8:45
Motor Installation 9:59
Cable Protector Installation 11:50
ESC Unboxing 13:17
ESC Preparation 13:50
ESC Installation 21:45
FC Unboxing 23:40
VTX Soldering 25:35
ELRS Soldering 27:35
FC Installation 31:00
VTX Antenna Installation 31:58
Top Plate Installtion 33:17
Super Sticky Lipo Pad 35:00
Action Cam Mount DJI Action 2 36:37
Does it work? 37:15
Betaflight Update to 4.5 37:31
Betaflight Setup 38:01
Filter/Motor Settings 39:32
PID Settings 40:34
ELRS Flash 41:08
Modes Tab 41:54
OSD 42:52
AUW 43:45
www.itsfpv.de

[@Ovaflo]

Just ordered mine, keen to see how it hold up. Keep up the good work lads

[@PattyFlipz]

Congratulations! The frame and motors looks very nice. 👍

[@edenr1988]

Great walkthrough! Very detailed. I just ordered mine and can't wait to try it. Thanks!

[@rharripersad]

gonna do this build with the 2208s, a dji o3, a 1400mah pack and maybe a GoPro hero 12

[@nils_vo]

top tier ASMR

[@hi_desert_rat]

Very nice, looks pretty tough.

[@Smagsfpv]

Looks like a great frame

[@fpvkevlar8101]

Cool build video. KZbin showed me your channel just subed.

[@lagezon5270]

nice one Ken. I hope this goes well and you consider doing a 3.5"

[@Smagsfpv]

Looks like a interesting frame. I like the camera cage and the middle plate thats soft and keeps the arms together. I would like to try this frame, maybe make a review video myself

[@HunnyFPV]

What is the weight of the frame?

[@bluefpv3263]

hätt ich schon bock drauf sieht geil aus das teil

[@dinosabic5383]

Just placed an order for mine :D Cant wait!!

[@FlyZoneFpv]

Awesome build I’m very impressed I saw the bash video from Mamba and review from Drainman . If get one I will review it as well. We have a fpv event we are doing in July me and our team I’m gonna share this with them.

[@crumbled_fpv]

awesome build... freestyle4live❤

[@Rcschim]

Sehr geiles Build Video - bin froh daß ich das noch rechtzeitig gesehen hab, bevor ich mit meinen eigenen Lösungen anfang. Freu mich richtig auf's Basteln (und das soll was heißen bei mir!). lg, Mario

[@ITS_FPV]

Vielen Dank! Viel Spaß beim bauen ;)

[@Rcschim]

​@@ITS_FPV ist schon geflogen!

[@juliusen7336]

what's the weight of the frame itself? it feels as if you're hiding that information on purpose, because i can't seem to find that info anywhere! 🧐

[@HunnyFPV]

That’s for sure. I suppose it’s near 160-170 mark, otherwise they would not hide it

[@HunnyFPV]

Also, they answer other comments questions but not this one)

[@marcelbee]

Any chance you could offer these beefy lipo straps individually? At least i couldnt find them in your shop. Either in 250mm or maybe different length. ❤

[@itskenfpv]

You can find them in spare parts :)

[@taktaktony]

What PIDS would you recommend for a ICM FC? I accidentally bought the wrong one

[@ITS_FPV]

Hi! Don't worry, we tested the ICM too and it worked great. Just check for hot motor temp and in case you enable LP2 again.

[@sagivlevi]

frame weight only?

[@athirfpv9310]

hi have you got special tune for the frame (im going to use it with fettec alpha .FC&ESC) AND is there any grub or discord serva to follow thanks

[@ITS_FPV]

We only have a special tune for betaflight 4.5. You can join our FB Group called it's FPV Squad!

[@ryanthurm3165]

What gauge wire did you use for your capacitor extension?

[@ITS_FPV]

22AWG, you can use your left over motor wires

[@erlendlkka5144]

Does the part in 7:14 come in the package with the frame? And whats that gum looking stuff you use at 14:05 called?

[@ITS_FPV]

No we sell the ELRS antenna holders seperately as they only fit the Radiomaster RP1 V2 antenna. But in case you have a 3D Printer - you can download the STL on Thingiverse or itsfpv.de for free. The gum is called Blu Tack/ Patafix.

[@FREEDOMFPV84]

Nice frame are the props in view of the 03 camera

[@ITS_FPV]

Yes they are in view!

[@zlachannel8674]

​@@ITS_FPV can the cage have 40 degrees angle for o3....?kindly to advice sir

[@Booster388]

So my question is are you going to have any stl files for other GoPro

[@ITS_FPV]

We uploaded the "base mount" of our action cam mounts to our FB group "it's FPV Squad" - you can easily remix to your own specific camera.

[@sebfpv1974]

what is the carbon type used here please ?

[@ITS_FPV]

Bottom Plate Front and Bottom Plate Back T800, Arms and Top Plate T700

[@hantu66]

❤❤saw drainman’s video about this frame… it’s on the way now .. can’t wait lol😅

[@maradon._.]

are motors etc. included in the ERA 5'' Frame Kit?

[@ITS_FPV]

No, you can buy motors separately in our store.

[@maradon._.]

@@ITS_FPV awesome!

[@3eggerfpv397]

A hundred dollar frame and the press nuts aren't pre-installed....alrighty then! Not a complaint, really, but hmmmmmmmm!

[@itskenfpv]

Installing pressnuts is incredibly satisfying when building this frame, at least for me. You'd be missing out haha

[@Normandy616]

А где полет бро?