How To - Audio Settings Standard Mode on Pioneer AVH-EX In Dash Receivers 2018

[@RAAUUULLLL4268]

Wow... That was Evey well explained

[@deckerdotto6035]

You can find a full playlist of Pioneer How To videos about AVH-EX receivers here: kzbin.info/www/bejne/eJe0ooWcbc-kotU and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@brandonfillinger3034]

Any idea why my avh500ex would be slow on bluetooth when I watch KZbin or any song or videos. It seems slow to catch up.

[@deckerdotto6035]

This is normal operation for the product. The Pioneer AVH-500EX is not designed to be a Bluetooth speaker used to watch movies on a phone while driving. You can find more How To videos for the AVH-500EX here: kzbin.info/www/bejne/oYOqgX2DYs94oas Please be sure to install the latest firmware for your Pioneer AVH-500EX. You can find it here: www.pioneerelectronics.com/PUSA/Car/DVD+Receivers/AVH-500EX#downloads You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@ridemydirt2005]

Thanks for the helpful info.

[@Murrayfan]

When I go into audio settings everything is grayed out except mute level. What do I need to do

[@deckerdotto6035]

I recommend to press the microprocessor reset button located on the Hard Key Button Panel. You'll need a paperclip or some other small point to press the microprocessor reset button. Next do a Full System Restore. You'll find System Restore in the System Menu. When the system restarts, choose an audio source, like AM/FM radio and then the Audio Settings. Be sure you have the latest firmware installed on your particular in-dash receiver. You can find it here: www.pioneerelectronics.com/PUSA/Car/DVD+Receivers/AVH-601EX#downloads You can find more videos about Pioneer AVH-601EX here: kzbin.info/www/bejne/eJe0ooWcbc-kotU and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@kylesvideos59]

How do you access “position” under listening position. It’s constantly greyed out

[@deckerdotto6035]

Listening Position is not available if you are using Network Mode. From the main system menu, you can see what Listening Position setting you are using with the "Position" display. You change this under the "Listening Position" setting. You can see it here: kzbin.info/www/bejne/iHPZmn6hZ8iEec0 You can find more videos about Pioneer AVH-601EX here: kzbin.info/www/bejne/pZWkmYtoa9yZqpI Please be sure to have the latest firmware installed for your Pioneer AVH-601EX. You can find it here: www.pioneerelectronics.com/PUSA/Car/DVD+Receivers/AVH-601EX#downloads and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@hondapilotab]

My problem is with avh 501ex, bluetooth is delayed like 2 sec from my phone, with sound and the function also like skip next track. Can you please help me

[@deckerdotto6035]

This is normal operation for the product. It's not designed to watch a video on your phone and use the in-dash receiver as the Bluetooth audio system. Please be sure to have the latest firmware installed on the in-dash receiver. You can find it here: www.pioneerelectronics.com/PUSA/Car/DVD+Receivers/AVH-501EX#downloads You can find more videos about Pioneer AVH-501EX in this You Tube playlist: kzbin.info/www/bejne/eJe0ooWcbc-kotU and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@waveofayougen1941]

I have the pioneer avh 501 ex everything is wired correctly. But i cant get the xm radio to work. Is that in standard mode or network?

[@deckerdotto6035]

Standard Mode or Network Mode operation is the same for SiriusXM. It does not matter which one you use. You can see the operation here: kzbin.info/www/bejne/b3a2gaGebKyegbc Do you have the optional SXV300 Tuner from SiriusXM installed in the system? It installs on the back of the in-dash receiver. You can see the back of the receiver in this video: kzbin.info/www/bejne/eoWkZ4CuhZWXd5I After you install the optional SXV300 Tuner from SiriusXM I recommend to press the microprocessor reset button found on the face of the Pioneer AVH-501EX on the top left, beside the eject button. You'll need a paper clip or some other small point to press reset. Touch the source list and choose SiriusXM. You can find more videos about Pioneer AVH-501EX here: kzbin.info/www/bejne/p6KsnZmwi8ejqpo

[@Awol_n_Dallas_Blue_Trumpet]

I have the avh 600 i just got. Now i cant play music off my sd card. How can or what can i do to play all my music from my sd card????...

[@deckerdotto6035]

The Pioneer AVH-600EX does not have an SD card slot, so it will not play music from SD. It does have a USB port on the back and a USB extension is included in the box. I recommend to transfer your music to a USB thumb drive and play the music from the USB source. You can see it here: kzbin.info/www/bejne/eJe0ooWcbc-kotU The USB port is on the back of the in dash receiver, you can see it here: kzbin.info/www/bejne/j4a0Z2iffM17m6c You can find more videos about Pioneer AVH-600EX here: kzbin.info/www/bejne/nKnRkISfobV2fdE

[@dremiller1]

My woofers don't work at all.. the amp is on but no sound

[@pioneerelectronics]

Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? What is the amplifier? Did you run RCA cables from the in-dash receiver to the external amplifier? Or are you trying to use speaker level input to the external amplifier? What is the subwoofer? If you have a Pioneer EX receiver, do you have the subwoofer output switched on? You can learn more about the subwoofer output on Pioneer EX receivers in the Pioneer How To video: kzbin.info/www/bejne/mKrUlo2ro5igfc0 and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@dremiller1]

@@pioneerelectronics I have the AVH-X390BS MixTrax 3000 watt Planet Audio with two 12 inch kickers

[@pioneerelectronics]

Please watch this How To video from Pioneer about setting up your subwoofer output. It's nearly identical to the operation on AVH-X390BS: kzbin.info/www/bejne/sKO6amWQrcR_has Be sure to set the receiver's subwoofer output to ON. The AVH-X390BS has 3 pairs of RCA outputs used for operating external amplifiers. You can see them in this unboxing videos from Pioneer here: kzbin.info/www/bejne/aWLPqYqDeaZ8grs You'll need to run RCA cables from the receiver's bottom pair of RCA outputs directly to your amplifier. You can find a full playlist of How To videos from Pioneer about AVH-X390BS here: kzbin.info/www/bejne/nJ3Qg3uZfL-LadE and you can find more videos on Pioneer's KZbin Channel here: kzbin.info