HOW TO BEND PVC PIPE EASY!

HOW TO BEND PVC PIPE EASY!
In this video, I show you an EASY way to Bend and Shape PVC Pipe into almost any design you want. And the best part, it takes less than 5 minutes.
I recently purchased a new tool called the PVC Bendit. It is the only PVC heating tool that I know of that heats the pipe from the inside.
This tool is a must have for anyone who loves making projects with PVC pipe.
This video will show you how the PVC Bendit tool works and everything that is included with the kit.
PVC Bendit on Amazon:
amzn.to/2wlDZBK
Other PVC Pipe Projects:
10 Life Hacks with PVC (#1 of 24+)
• 10 Life Hacks with PVC
DIY Water Mist System for Summer - PVC Pipe Project
• DIY Water Mist System ...
PVC Dog Wash - Pet Life Hacks
• DIY Dog Wash - PVC Dog...
How to make a LONGBOARD with PVC PIPE
• I Made a LONGBOARD fro...
Your results may vary depending on type of materials, your craftsmanship, and tools at hand. We are not responsible for any damages or injuries that might occur. Use of video content for personal projects is at your own risk.
Some links in description are affiliate links that let you help support our channel at no extra cost to you.
John 3:16-17

[@alant5757]

I use a LARGE propane tipped torch (not the little one on most torches) but you have to keep it constantly moving so it doesn't burn. Works great... been doing it for years on big and small PVC pipes.

[@kathleen2937]

Thanks for this. I just ordered one and hope it works as wells as you show here. We have a small shop so using sand or a torch is out of the question.

[@m0odi]

You can use PVC to make an outside working table. That could be a nice project.

[@julietbonilla7853]

Great review my husband will love this 🤗 thank you for sharing have a blessed day

[@SpecificLove7]

You are very welcome

[@shuca7442]

I love it. But at $300, I just don't see it in my toolbox because this probably would be a "nice to have tool" but I really don't see myself using it all the time around my garage.

[@jjo5375]

This is really great...no need for all those elbows and 'T's', etc. fittings! Thanks for the demonstration! : )

[@SpecificLove7]

You are very welcome

[@daciasdiy1861]

That’s true , cud be a money saver in the bling run

[@proapp]

That's awesome! This will be awesome for conduit when running low voltage wire!

[@SpecificLove7]

Very true

[@davidsteinfeld9123]

So true can't do that work easily with a heat gun would take for ever and will look like crap not to mention how many burns later however that's awesome I am interested got a project lined up for such a tool tell me were you got it so I can get me one Thanks for sharing this juicer morsial

[@djacob7]

That heated PVC will kink easily if you're not careful. Sand filling is better.

[@wakkywabbit5446]

You can't bend ends well using sand. An expanding heated spring prevents collapse and allows ends to be curved. This method is very similar to heated, expanded springs.

[@dougalexander7204]

$300.00 something for tool but worth it if project needs custom bent pvc. Thank you for sharing.

[@mattchumoore4214]

It ain’t worth it

[@cyberi4a]

Interesting, can't wait to see what you make now with bended PVC.

[@SpecificLove7]

+cyberi4a I have a few ideas I hope to work on soon.

[@wakkywabbit5446]

Thanks a lot. I'm probably going to purchase this item.

[@ROOKTABULA]

Wow. The "bend station" is just pipe insulation; a standard junction box; some steel braid insulation; and another $20 or $25 worth of off the shelf stuff! Wonder what they're charging? $300?!??? Lol! There's 1 born every minute I guess.

[@jerryparisi2885]

Can You Give A Better Or More Info. On How To Make This Tool? I Would Love Making Things With PVC Pipe Like Dog And Cat Houses, Green Houses Just About Anything That Comes To Mind. Thanks.

[@kathleen2937]

Hey Rooky, the cost is due to the CSA certificate. Using electrical devices without the CSA rating voids your insurance. Plus if you are doing 20 of these bends every month it is worth it.

[@TheLightHouseLady]

Wow, very cool

[@SpecificLove7]

+TheLightHouseLady Thank you

[@docink6175]

I see a cool raft/table top hanging up, if you only knew of some material to make clamp on legs out of..... That is an interesting device to be sure

[@SpecificLove7]

+Doc Ink Thank you

[@starshipgus8578]

Great presentation,I used a heat gun but the results were not like this special tool.Thanks.

[@christianadventure]

That is wild to how it gets to be like a garden hose in the way it bends that easily!

[@SpecificLove7]

The smile in amazement on my face was real, I did not think it would be that easy.

[@gitnessframtacerpest2813]

Hey if you take a heat gun and make a trough out of some wood then cover it with metal tape then put you’re PVC pipe and it heat up it will only take about a minute and it works great

[@mypawfectfamily]

Wow this is so cool! So could you do a project using these, because I can't come up with anything to use this for. I'm sure you could come up with some great ideas:). Also, since it's back to school season, could you do a back to school related video if you get a chance? Thank you:) another great video :))

[@SpecificLove7]

+My Pawfect Family I am currently working on some ideas that hope to release in a couple of weeks. As for the back to school, that is a maybe.

[@lindam.9282]

WOW! It sure is expensive. I think I'll stick with the "hot sand" idea. YIKES! I can't afford this thing, but I sure wish I could. UGH.

[@CheersWarren]

Hi so if you don't kink it is there any loss of strength to the pvc? I did some bending with a heat gun and later it cracked . Thanks for posting .warren

[@SpecificLove7]

In the short term, the pipe still feels strong. But like any plastic that has been heated, it can become fragile over time.

[@Jetexinc]

Great videos and project ideas

[@SpecificLove7]

+JetEx, Inc. Thanks

[@linod7265]

Hi, great review, have you tried to bend PVC with solar vaccume tubes? It great because the temperature won't let the PVC to burn (no toxic fumes), and is from free energy!! The cons are is that in cloudy days, the temperature is barely enough to bend PVC, and the only wides that are possible to bend are 1/2 inch and 3/4 inch. I will upload the video about it, in my channel, it's in spanish, but as soon as I translate it, I'll upload the english version. Congratulations! regards

[@SpecificLove7]

Sounds like an interesting idea

[@timroberts9345]

Lino Delgrande

[@harnarayankushwaha3691]

Nice

[@nwembly]

How do you maintain the shape without collapsing the tubes diameter, being theirs nothing inside to prevent it?

[@batmanthedarkknight4227]

You defined the laws of physics

[@henrycems]

Wow that is cool !!! Have an idea for you. How about a PVC horse shoe set bet that would be fun. Thanks.

[@SpecificLove7]

+henrycems I just might do that, thanks

[@timhickman9911]

Specific Love Creations You could use 1/2 " schdl. 40 bent for one set of horse shoes and filled with sand for weight, then capped on both ends. Then try the grey pvc conduit for the second set. Use 1" Schdl. 80 capped on one end and cut at a 60° angle on the other for the posts.

[@ItaloLima]

Cool !!

[@hansdegroot8549]

Good review of probably a good product. Only "a little bit expensive. I think somebody clever can make it for less than one tenth of this price.

[@gitnessframtacerpest2813]

Hans de Groot yep you can heat up sand in a pan then pour it into the pipe or you can make a trough out of wood and ducting tape then use a heat gun to heat it up

[@محمدجابر-غ1ن6خ]

Can it be use on PPR pipes? Or its only for PVC .

[@danburch9989]

Time to bend is from a PREHEATED state. I think 1/2" or 1/4" copper pipe with many holes drilled into it and a heat gun adapted to it is less expensive. At least it's worth a try.

[@yousefmatthew9879]

Dunno if you guys cares but if you are stoned like me during the covid times you can watch all the latest series on instaflixxer. Have been binge watching with my girlfriend for the last months xD

[@calvinsullivan9100]

@Yousef Matthew definitely, I have been using instaflixxer for since november myself =)

[@i_am_a_freespirit]

I heard of filling the PVC pipe with Sand, use end caps and then heat slowly as you bend

[@rickden8362]

Even easier is Boiling water.

[@Dan-un4vt]

TIP,, YOU CAN USE BOILING WATER ,,JUST PUT THE WATER INSIDE OF PIPE.

[@togetherwemake8048]

great review thank you

[@georgechapman1259]

DAVID 24 he

[@kijeshistyle647]

Can you build a lawn chair out of PVC now that you have a PVC Bendit with you please

[@SpecificLove7]

+Kijeshi Style maybe

[@1952banjo]

That's great !!

[@SpecificLove7]

Thanks

[@poindeml]

$300!?!??! You could make one with heat tape and flex-conduit for much less. Just sayin'...

[@CrankyPantss]

poindeml go ahead then...

[@poindeml]

CrankyPants I will

[@spuriouseffect]

All you have to do is heat some sand up in a pan, put a piece of tape over the end, and use a funnel to pour in the hot sand.

[@jamestang1265]

poindeml

[@jerryparisi2885]

Can You Give Me An Idea On How To Build Something That Will Do This? I Have Projects In Mind All Ready. But No Heating Tool. Thanks

[@Ofageover50]

$300, you can buy a lot of play sand for that... and the sand will also keep the pvc from collapsing on itself....

[@mattchumoore4214]

Yeah just put the sand in the oven cap the pvc pour it in after it’s hot and boom ezpz

[@toddshobbyzone659]

i was thinking the exact same thing-- unless you are doing this for a business or using every day the $300 is a hard pill to swallow.

[@apkn1955]

Andy Kaufman is alive.

[@imlovingslots9878]

Can you bend 2" pvc?

[@gemlenz]

$300 for the system... yikes!

[@SpecificLove7]

+George Lenz Most useful tools can cost high. That is why I waited to make sure it worked before letting everyone know.

[@11304800]

NO to $500 NO to $300!! God down to alliance store and buy a loooooong heating element and make your own--!!!!

[@hankfoto]

What is the largest diameter it will take?

[@SpecificLove7]

The bending tools have a couple sizes.

[@prasantapatro597]

how about thick PVC bending?

[@24nikita]

This PVC bender named "Bendit PVC" is on sale nowhere on the internet.

[@antoleyo3857]

can it bend 4 inches PVC pipe?

[@Bend_PVC]

There are seven different models of the PVC Bendit. All can be used to bend 4" pvc schedule 40 but you will need to have some additional materials. Please take a look at the KZbin video "How to bend clear schedule 40 pvc pipe"

[@germang2831]

Thank you 😂🤣

[@stanwebb3480]

At $299 for your machine.... This machine better be able to make breakfast as well take the children to school!!!!!!

[@wokeup1969]

Hair dryer or torch. Take the difference and spend time with the family.

[@Oldbutschooled]

Heated sand is much cheaper and faster!

[@rsyn27575]

sand and a heat gun works too

[@flavigator]

hot water does the same....nearly free!

[@BJBDF]

300 dollars for this contraption is pretty ridiculous.

[@akilasampath1945]

how much this mazin

[@Luke-jo2xi]

Step one, buy a pvc bendit

[@SpecificLove7]

+LittleBrownPirate I have tried several other ways and this is the fastest and easiest way to do it.

[@11304800]

$300!!!!!!!!!! No way

[@jerryparisi2885]

PVC Bendit, Is That The Name Of The Tool?

[@prasantapatro597]

How about combination of PVC and Metal

[@ff669channel2]

Make a boomerang pvc

[@madunbar]

Its kind of pricey at $299. Does the PVC Bend-It have a temperature regulator?

[@SpecificLove7]

As far as I can tell, it only has one temperature which is set just for PVC.

[@veli_vi]

What if someone doesn't have the money to buy this PVC heater? Can this person still bend the PVC tube? Yes, use heat up sand, you still can do the same job.

[@rickden8362]

Boiling water is even a easier.

[@ShadowdesforgesShadowdesforges]

Cool thing but expensive.

[@pitbulllaw7772]

Plus no flat sections

[@therealandrewcano]

This dude looks like a high school kid 😆

[@SpecificLove7]

Thank you very much

[@JohnDoe-kp3sw]

Did some one say $300. Damn

[@SwampDonkey64]

Take it apart in next video. We want to see the insides. To make it are self. Save some doe.

[@marcm83]

You should ditch the loud background music.

[@ThePlanet_L.I.]

Make a table out of pvc pipes

[@SpecificLove7]

+LongIslandADED. I have some plans for that in the near future.

[@ThePlanet_L.I.]

Specific Love Creations that's what's up can't wait to see the vid

[@pitbulllaw7772]

Hot Sand

[@jerryparisi2885]

Hot Sand! Many People Mentioned That, How Do You Heat Up Sand, And Enough To Do A Larger Project?Again How Do You Heat Up Sand? What Kind Of Sand? Does It Make A Difference?

[@tysonmcdonald5595]

Hot sand works better... By far

[@joeyarbogast6327]

You have the gloves on the wrong hands

[@prasantapatro597]

CAN YOU MAKE A SAND BLASTER USING PVC?

[@SpecificLove7]

+P Patro Sand blasters are usually made of metal because they would destroy a plastic gun.

[@andrewmarvell982]

P Patro i

[@havefunandgameon6514]

FIRST

[@FrozenMammothMusic]

How to bend PVC easy: Buy this $300 tool.

[@Ms.Byrd68]

This costs over $250 though...

[@gengpan]

I wanna do the opposite. Make bended pipe straight

[@lukepotosky7710]

Dude this is an extremely over priced item and this video is basically just an ad for it.

[@stonedDawg]

i thought im gonna learn something, instead of advertisement...

[@therealandrewcano]

👍🏼

[@petrino]

500 dollars for a single project? pass. back to heating up sand.

[@gengpan]

Hah? 350usd?

[@jeffmilkey]

$300!!! I think not.

[@davekgill]

This is joke right?

[@jerryparisi2885]

Why Do You Ask? Did I Miss Something? Seems Like A Cool Tool, Just Priced To High.

[@ricpineda8621]

Wasting money

[@6969Suzanne]

ERROR in your video title!! Correct English is "How to Bend PVC Pipe Easily!", NOT "Easy"!