HOW TO: BLACK OUT LANCER GRILLE WITH Plastidip

  Рет қаралды 126,100

BillyVisuals

BillyVisuals

11 жыл бұрын

TURN ON ANNOTATIONS IT HELPS!!!
Extra Tips!!!
1. PLEASE RIP OFF THE MASKING WHEN THE PAINT IS STILL A LITTLE WET.
2. Spray from a distance.
3. Also clean the surface with some goo cleaner to get rid of grease and nasty stuff!
Blacked out the nose of the Lancer using Plastidip!

Пікірлер: 113
@ethancollier5939
@ethancollier5939 7 жыл бұрын
don't be fooled i thought he was kidding about the Chinese newspaper but when i did it with normal newspaper my car caught on fire
@BillyVisuals
@BillyVisuals 7 жыл бұрын
hahaha 😂
@AnimexesPiano
@AnimexesPiano 5 жыл бұрын
some people will take that comment seriously lmao
@OASIEROFFICIAL
@OASIEROFFICIAL 4 жыл бұрын
😂😂😂😂😂
@evancunningham9872
@evancunningham9872 9 жыл бұрын
i have an evo x, and i can tell you that came out really well.
@navaneethakannanv
@navaneethakannanv 9 жыл бұрын
Worked out so well. thanks very much for sharing!
@futureyeet
@futureyeet 8 жыл бұрын
Came out really nice!
@jasonweremy4391
@jasonweremy4391 10 жыл бұрын
You did a great job but I have some pointers for you. When you dip a project you should have prepped the area with DYC Pre dip spray, Windex, or a mix of rubbing alcohol and water(50/50). If the project is wet or dirty, dip isn't going to cure and it could bubble and lift the dip. The reason why it's running is because you're spraying too close. You need to have some space between the can and your project. Stock nozzles that come with cans suck, get an aftermarket nozzle. There isn't a lot of spray that comes out so you're going to have to do more passes to get more product with each coat. It's especially when you're doing 6 coats with a stock nozzles. Even though 6 coats on a stock nozzle is still very thin. Great video none the less.
@BillyVisuals
@BillyVisuals 10 жыл бұрын
Yeah I should definitely get different nozzles, this was my first time plastidipping so my bad for the extremely novice job.
@BillyVisuals
@BillyVisuals 11 жыл бұрын
Thanks a lot! really appreciate it
@jaipatel69
@jaipatel69 11 жыл бұрын
Nice video and lancer man
@Fail-Safe-1
@Fail-Safe-1 9 жыл бұрын
I used matte black vinyl wrap lasts a lot longer. Takes time to put in though :)
@frankiwilliams8620
@frankiwilliams8620 2 жыл бұрын
Looks hella good, will be doing this for my '15 ES
@BillyVisuals
@BillyVisuals 2 жыл бұрын
Amazing! How did it turn out?
@pineappleapplepens
@pineappleapplepens 8 жыл бұрын
chinese newspaper is the key to success
@ktg6548
@ktg6548 7 жыл бұрын
AllYouHearIsSwoosh lol
@jtaghackerv6976
@jtaghackerv6976 7 жыл бұрын
I went with a 2014 lancer Es just for the Evo look that had 20.00km for the same price as a new lancer
@SteelEagle
@SteelEagle 9 жыл бұрын
Looks great
@ge69rh
@ge69rh 10 жыл бұрын
I found it just as easy to take out the chrome piece to spray it. Your car looks good.
@jaimemedrano1788
@jaimemedrano1788 4 жыл бұрын
My lancer is already blacked out how it came when i bought it its the gt lancer but took my license plate so I can put it on the side
@dskinnydudefitness
@dskinnydudefitness 9 жыл бұрын
Nice job there! BTW, your first tip you mentioned "rip the masking when paint is still wet", won't the first few coats rip as well since you had to dry it out between coats?
@BillyVisuals
@BillyVisuals 9 жыл бұрын
Thanks, and to be honest It didn't happen like that. It was still kind of damp after 10 minutes of waiting for each coat. So it still worked out fine for me when I ripped off the masking. However If you have another way of ripping off the mask without ruining the paint then please suggest it so I can inform others. Thanks!!
@DRat_
@DRat_ 4 жыл бұрын
Its like when you paint a wall. Or anything you do more than one layer but between every layer you wait for it to "dry". You dont wait until it is completely dry or you will get a sandy texture and not a smooth texture you wait until its kinda like a gooey consistency and you spray the next layer. After you spray the amount of layers you want or need you rip it off but not until the last layer is gooey. And if you keep adding moisturizer to a wet surface it won't dry completely so thats how it doesn't dry at the bottom.
@eddykintana6932
@eddykintana6932 9 жыл бұрын
Excellent job ! Did you remove the masking after the first coat or after you done all of them ?
@JawDropMedia
@JawDropMedia 9 жыл бұрын
I'm pretty sure he removed masking after he finished all 5 coats. or else he would overspray on to the car
@dakotakavana
@dakotakavana 10 ай бұрын
@@JawDropMedia lmao
@prophecy0618
@prophecy0618 10 жыл бұрын
Looking to do the same work on my 09 GTS, what were the problems u ran into with removing the license plate? Looks damn good by the way too dude.
@BillyVisuals
@BillyVisuals 10 жыл бұрын
Thanks a lot! prophecy0618 I think the main problem is spraying too close and also taking off the masking while the paint is still wet. if you don't take it off while the paint is wet, then you'll rip out the plastidip too.
@angelbluerider9588
@angelbluerider9588 6 жыл бұрын
does the plasidip last long from ppl bumping their cars into your bumper? and from car washes?
@jasper_north
@jasper_north 5 жыл бұрын
Angel bluerider nobody uses carwashes...we all do it by hand. We hate scratch machines.
@carl3837
@carl3837 4 жыл бұрын
wait, does American newspaper work or is chinese newpaper specially made for mitsubishi car projects?
@BillyVisuals
@BillyVisuals 4 жыл бұрын
I've heard those newspapers can cause some issues but go on and try it! It might just be okay!
@SpaceRocket23
@SpaceRocket23 8 жыл бұрын
Hey legend! Which number coat did you take off the masking?
@BillyVisuals
@BillyVisuals 7 жыл бұрын
5 coats. thanks for stopping by :)
@jram5720
@jram5720 6 жыл бұрын
Does that spray paint last long ?? Or does it fade ??
@davidnorthern4257
@davidnorthern4257 5 жыл бұрын
It doesn't fade it just peels
@Pepperjack57IsAwesome
@Pepperjack57IsAwesome 2 жыл бұрын
Any future update about how this car’s front grill has held up with the plastidip? Has it chipped or peeled at all?
@BillyVisuals
@BillyVisuals 2 жыл бұрын
Since this video, it has mainly chipped on the top silver trim edges (not visible from afar). Hasn't really lost it's look, though it might be a bit duller that's all.
@Pepperjack57IsAwesome
@Pepperjack57IsAwesome 2 жыл бұрын
@@BillyVisuals Awesome! Wow didn’t expect you to reply so soon, and also yeah I sorta figured.. would sanding the chrome trim before help to better stick tho? Lol
@BillyVisuals
@BillyVisuals 2 жыл бұрын
@@Pepperjack57IsAwesome please don't! not with plastidip. It's meant to be a temporary type of aesthetic enhancement not permanent. So if you sand it down it would mean that one day when you decide to peal it off, it would be damaged
@Pepperjack57IsAwesome
@Pepperjack57IsAwesome 2 жыл бұрын
@@BillyVisuals Aight thx for the tip bro 👏
@jaimeprado23
@jaimeprado23 10 жыл бұрын
Is it better with or without the chrome?
@BillyVisuals
@BillyVisuals 10 жыл бұрын
I feel like its better because it just looks more aggressive without the chrome. and the chrome is tacky
@feliipepulidojr8306
@feliipepulidojr8306 9 жыл бұрын
Ay eso excelente!!! Soy quiero voy
@kenvangheel6494
@kenvangheel6494 9 жыл бұрын
nice one! I have got the same car and i am also going to do some plasti dip. How long did you wait between coats?
@bicecream88
@bicecream88 9 жыл бұрын
about 10 mins.
@kenvangheel6494
@kenvangheel6494 9 жыл бұрын
ok thanks
@dariomiskovic8342
@dariomiskovic8342 10 жыл бұрын
How many coats did you apply?
@BillyVisuals
@BillyVisuals 10 жыл бұрын
Did like 5 coats? 5 + coats is the recommended amount of coats or else it'll chip or won't come off as a all in one piece.
@germansosa136
@germansosa136 9 жыл бұрын
Some dude told me you had to sand the paint first or else it will get ruined, is that true or no?
@BillyVisuals
@BillyVisuals 9 жыл бұрын
NO do not do that for plastidip... there is no need for that with plastidip because it's self adhesive. You only sand it if you're permanently painting your car parts with real paint. Plastidip is only a rubber compound for protection over your parts
@germansosa136
@germansosa136 9 жыл бұрын
Cool thanks! You're car looks sick by the way! 👌 mines is a white lancer I hope I do a good job on it.. Thanks!
@jabbamackie18
@jabbamackie18 10 жыл бұрын
How many cans did you use?
@BillyVisuals
@BillyVisuals 10 жыл бұрын
Just one can of Plastidip.
@chriscapps4334
@chriscapps4334 7 жыл бұрын
how many coats did ya do?
@BillyVisuals
@BillyVisuals 7 жыл бұрын
About like 6 coats?
@zachrider3416
@zachrider3416 3 жыл бұрын
GUYS..HOW TO CHANGE LANCER EX LOOK LIKE EVO ...
@TehTrixxable
@TehTrixxable 7 жыл бұрын
Thanks, off to my chinese supermarket
@consarellis4669
@consarellis4669 8 жыл бұрын
how many coats?
@bryanbui8545
@bryanbui8545 8 жыл бұрын
+con Sarellis 3-4 is usually a good amount.
@jorgeromero1502
@jorgeromero1502 8 жыл бұрын
What year is this car?
@ambassadorofcorruption3276
@ambassadorofcorruption3276 8 жыл бұрын
2009 year model
@luisca27ro41
@luisca27ro41 10 ай бұрын
Could i use normal ping if i can’t find plastidip?
@BillyVisuals
@BillyVisuals 10 ай бұрын
Absolutely, there is probably some type of vinyl spray at your local hardware store. But if you only have spray paint, you should use sandpaper to sand down the area you want to paint first. That way the colour will actually stick.
@luisca27ro41
@luisca27ro41 10 ай бұрын
@@BillyVisuals Appreciate it!
@BT-xv8xh
@BT-xv8xh 2 жыл бұрын
Nice
@BillyVisuals
@BillyVisuals 2 жыл бұрын
Thanks
@XxTournaquetxX
@XxTournaquetxX 9 жыл бұрын
That is the best color for the Lancer GTS.
@yurrien8305
@yurrien8305 3 жыл бұрын
That blue middle part aint that able to come out??
@BillyVisuals
@BillyVisuals 3 жыл бұрын
Nope, it's built into the bumper
@yurrien8305
@yurrien8305 3 жыл бұрын
@@BillyVisuals but it looks like just a cover to hide the steel frame
@BillyVisuals
@BillyVisuals 3 жыл бұрын
@@yurrien8305 it looks like that but unfortunately it's not like that
@Pkerkillingz
@Pkerkillingz 9 жыл бұрын
Can i use hindi newspaper
@BillyVisuals
@BillyVisuals 9 жыл бұрын
I heard hindi newspaper might be the better than Chinese but I can't say that for sure, you're going to have to test it out!
@swegybucket69
@swegybucket69 9 жыл бұрын
Row Zor wtf man lmfaoo
@jaimeprado23
@jaimeprado23 10 жыл бұрын
Wait the chrome is integrated on gts models?? Thats a no no only ES n DE are detachable
@BillyVisuals
@BillyVisuals 10 жыл бұрын
For 2008+ models they had the chrome up until 2011+ models, they changed the look of the front bumper to have the chrome all around the blacked out area on the GTS Lancer in 2011.
@jaimeprado23
@jaimeprado23 10 жыл бұрын
HikaruDesigns Cool nice video well imma plasti dip mine you got any other mods
@BillyVisuals
@BillyVisuals 10 жыл бұрын
Check my channel under lancer playlist. I have the GTS shifter mod video. Unless of course you're already driving manual
@jaimeprado23
@jaimeprado23 10 жыл бұрын
Yea i have it already but i was looking into performance like takeda SRI it says it gives up 15 HP
@user-mc5oq1ow7p
@user-mc5oq1ow7p 9 жыл бұрын
你是台灣人嗎
@trapsoulx
@trapsoulx 9 жыл бұрын
how long will it take till the paint fades?
@BillyVisuals
@BillyVisuals 9 жыл бұрын
Lil H I haven't really had any kind of fading in my paint. So I guess a long time
@nivlac4150
@nivlac4150 8 жыл бұрын
It's plasti dip not paint plasti dip is a rubberized coating in a can and a really cool feature is that you can peal it off when you don't want it on anymore or if you want to re do it and it should last you a long time
@kdmo7814
@kdmo7814 9 жыл бұрын
hey youtube.. today i will be blacking out the front.. WIND... WIND... WIND... WIND... WIND... of the lancer.. WIND... WIND.. WIND.. look like evo or ralliart
@bicecream88
@bicecream88 9 жыл бұрын
+Kd Mo LOL dead
@MitsubishiLancerGTS
@MitsubishiLancerGTS 9 жыл бұрын
Anyone plastidip the wing? Im going to this weekend!
@JawDropMedia
@JawDropMedia 9 жыл бұрын
What colour you plastidipping it? and what colour is your car?
@LanceB86
@LanceB86 8 жыл бұрын
Good thing my license plate is in the back..
@SASpooky
@SASpooky 9 жыл бұрын
I love how you made a video of a common sense job lmfao
@lildab42
@lildab42 7 жыл бұрын
ever seen a video on how to open a door....
@perre6385
@perre6385 6 жыл бұрын
Doesn’t look good with a colored car. Black grills only look good with black cars, should’ve kept it chrome
@DRE_OTB
@DRE_OTB 5 жыл бұрын
Max your definitely the only person who thinks that lmfao
@caseyjones9650
@caseyjones9650 4 жыл бұрын
What about jewish newspaper
@BillyVisuals
@BillyVisuals 4 жыл бұрын
That will work too!
@Evo.senpai
@Evo.senpai 9 жыл бұрын
should've left the bottom blue
@ViggenStory
@ViggenStory 7 жыл бұрын
Just trade it for an Evo Bro
@davidnorthern4257
@davidnorthern4257 5 жыл бұрын
Evo is about 2 to 3 times as much
@EXMerser
@EXMerser 9 жыл бұрын
Колхоз...
@RadDTaco
@RadDTaco 6 жыл бұрын
Plasti dip is horrible
@Farren2007
@Farren2007 7 жыл бұрын
still not an evo
@BillyVisuals
@BillyVisuals 7 жыл бұрын
Wow! Shit, you're right. I would have never known that. Thanks for reminding me that I have a mitsubishi lancer N/A edition, I wish I somehow I said that in the video... Or else I would've forgotten and thought I owned an EVO this whole time!
@Farren2007
@Farren2007 7 жыл бұрын
I can't hear you over the wind.
@BillyVisuals
@BillyVisuals 7 жыл бұрын
Its cool dude.
@Farren2007
@Farren2007 7 жыл бұрын
But you should definitely get an evo.
@theblacklancer9655
@theblacklancer9655 9 жыл бұрын
because ricer
@mekx738
@mekx738 6 жыл бұрын
TheBlackLancer not even lmao
@ge69rh
@ge69rh 10 жыл бұрын
I found it just as easy to take out the chrome piece to spray it. Your car looks good.
@BillyVisuals
@BillyVisuals 10 жыл бұрын
Thanks Alot Gary! Did you have to break any clips when you pulled out the chrome piece? cause for me that was a risk I did not want to take, so I did not take out the chrome piece.
@ge69rh
@ge69rh 10 жыл бұрын
HikaruDesigns No I didn't, I had heard about that concerned and was very careful not to force anything too much.
How To Overall Build Up Your Lancers (CJ’s,CF’s & C series)
9:16
CJLANCERTURBØCLUB
Рет қаралды 43 М.
Каха заблудился в горах
00:57
К-Media
Рет қаралды 10 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 33 МЛН
Mitsubishi Lancer Idoing Headunit Install & Hidden Features!! (07-17)
17:48
How To Plasti Dip Bumpers
8:44
9to5 Escape
Рет қаралды 195 М.
HyperDip vs. Plasti Dip - Which is Better?
13:14
Ehab Halat
Рет қаралды 367 М.
Replacing The Broken Chrome Ring on the Lancer
10:16
The Snyds
Рет қаралды 4,5 М.
Plasti Dipping Emblems-The best $5 car mod
8:06
KC Creations
Рет қаралды 1,5 МЛН
HOW TO BLACK OUT LANCER NOSE WITH PLASTIDIP
5:31
Brinrex
Рет қаралды 121 М.
CJ MITSUBISHI LANCER FOG LIGHTS INSTALL FROM START TO FINISH.
25:45
Entertainment Channel OZ
Рет қаралды 15 М.
MOBIL AKI AZHIRA #shorts #mobilaki #car #mainananak
0:19
AZHIRA SYAFIA
Рет қаралды 9 МЛН
Лайфхак для водителя езда на спуске 🚘
0:35
Авто.Бот
Рет қаралды 1,1 МЛН
ПОЧЕМУ НЕ НУЖНО ПОКУПАТЬ ГЕЛИК ЗА 18 МИЛЛИОНОВ🙅‍♂️
0:59
AUTOSAMKA | Купить авто под ключ из Грузии
Рет қаралды 2,3 МЛН