HOW TO BUILD A CUSTOM MOTORCYCLE FRAME JIG

See the complete bike build using this jig here: • Urchfab's Biker Build ...
Here's how I built a heavy duty custom motorcycle frame jig.
Full build series here: • Xtreme CB 550 Chopper ...
Dice Kit: ebay.us/Q62K67​​
MP200 Welder Raffle: urchfab.com/​​
​Support the channel: / ​​​​
Instagram: / matt_urchfa...​
Facebook: / ​​​​
Website: urchfab.com/​​
Thanks to my channel sponsors:
xtremeplasma.e...​​​​
www.inverterfu...
My camera gear:
Camera. amzn.to/2Dbvxd...
Mic. amzn.to/2DbyKd...
Tripod. amzn.to/2DxaEu...
My name's Matt Urch and I own and run Urchfab welding and fabrication.
I specialise in custom automotive fabrication from building roll cages to complete one off builds. I built the worlds most unique and oldest drift car known as 'The Drift Rod' which can be found on my channel.
So if you're into grinding, welding, fabricating, etc, you're in the right place!

[@staxonvehicletracking3468]

It was good to see it all come together. I know I’ve seen it all before, but I liked it. I’ve missed your metalworking capabilities.

[@riffraffchoppers]

For the time spent and cost of materials just buy a chop source jig

[@JShel14]

Such a masterpiece of a video. The pain of the damaged mug! The heartache of the snapped Tap! And the triumph of the finished jig! Kidding aside, this was really cool to see. I've always wanted to know how frames for bikes got assembled by hand.

[@Urchfab]

Glad you enjoyed it, Cheers

[@johncunningham4820]

BTW . That Engine in the Frame at the end is a Honda 750 four . SOHC , probably an early K-series Motor .

[@trevorjarvis3021]

A very Skilled Engineer at work!

[@markblundell9461]

Great job, extremely professional. I do like to leave the axle plate mount bracket adjustable. To allow for different length hard tails.

[@100Jeanluc]

Hi Matt, Great vid as always. If I could give you one bit of advice it would be, chamfer all the holes prior to tapping. Chamfering after can have a slight tendency to mess up the top of the thread. Otherwise faultless work.

[@Urchfab]

Noted! Cheers mate.

[@kevinlyon9501]

Nice job Matt that plasma table certainly saves a lot time, shame about the mug, still could always turn up a new one on the lathe👍

[@Urchfab]

Sure does mate.

[@markhills3922]

Now that is a nice piece of work! I'd love to have a workshop like that but I'd have to sell my house to get all the machinery. Then there's the fact that I'd have to spend a few months teaching myself how to use the Plasma Table! I've subscribed so I can watch more of your fantastic work! Cheers

[@MorganizerT]

I miss the angle grinder intro, bring it back!

[@tomscustomshop]

I have the starts of a jig at my workshop. One of them things that came up for grabs I got it and haven’t had time to even consider making it work 🤣

[@davidgrason161]

Actually, this guy is not teaching me how to build my jig. He's just showing off all the damn tools that I don't have.

[@похуйпляшем-й1н]

Excellent! But I should buy all this equipment at first and to improve my skills up to the same level! 😁

[@rasoulsadeghi8635]

can we build it up on top of a workbench?

[@crazymtbrider]

Looks alot cheaper than buying one my m8 had one made of I beams for building buggy's on but it took up most of the shed and needed a forklift to move it!

[@charmin1279]

Es lo que siempre quise hacer, buen trabajo. Good job.

[@oldgeeser]

Outstanding fab skills, just watched you build the bike. Just wondering if you are selling plans for the bike frame jig.? thank you.

[@gregebbert2153]

next project. "How to Plasma cut and Weld a coffee mug" 😂

[@peterwall9896]

I've seen mug welding on bad obsession Motorsport

[@BrianSmart1959]

I'd like to see that!

[@jeromeclements6532]

Coffee cups and soda bottles have a short life fab shops, welding shops and machine shops. I've dragged them off benches and table with my TIG cable, knocked them over, knocked them off and in general broken them into pieces in 50 different way. I worked for several years where you could only have styrafoam and soda in cans. Made sense.

[@wijayacanel4062]

kreatif & ketrampil yg hebat 👍

[@bezsobsaki]

Рядом чайник болгаркой почистил норм,накрыть не варик?

[@SuperCycle-23]

Good job.

[@MusondaV]

Can I change the frame of a small regular bike to make it look like a Superbike?... I love superbikes but I can't afford them so I want to build myself a frame of a Superbike but using every other thing for Bajaj Boxer.

[@crozwayne]

Hi, quick question, is your mill a Thiel? looks bigger than a Deckel, great mills

[@Goblingimp]

The pain when the coffee mug broke 😭

[@MadMotoInc]

Very clean 👊🏽💀

[@johnstilljohn3181]

Cool. Are you building more bikes, then...? Hope so...

[@allensnok1429]

great job😊

[@DJResearclab]

Hey would make a video on bobber shadow frame?

[@eduardosampoia5480]

Is that pulsed mig?

[@mattblack156]

Nice job. What's the milling machine?

[@glaubererbiste3976]

Parabéns irmão !!! Essa ferramenta é a mais bem feita que eu já vi !!! Você se importa de me dar o projeto para eu fazer uma ?

[@cuckoldawife]

Impeccable

[@emilycroot6306]

love this non talky vid. nice job.v cool.

[@iguanabelga8028]

When is the next bike coming?

[@joebalpascual5254]

Saan po location ng shop nyo po

[@haroldpearson6025]

Simplest way is to get a very good frame and build a jig round it.

[@kittonsmitton]

Brilliant really Urch-Fab

[@Rudimentary007]

Subbed. Nice work.👍

[@Urchfab]

Much appreciated!

[@mitsos_306]

Great work!

[@darrendaniels2415]

Tht spirit level shud say Bob on👍

[@glynprice3815]

An honourable way for a mug to go.

[@imouse3246]

No food or drink in the lab!

[@ifyoudontknow4767]

That's great if you have all the fancy machines but what about the ones who don't have 100k worth of gadgets to use I did enjoy the video and be cool to be able to make one but I'm looking for how to make one without the high end machines

[@gyrenrockz]

That mug will haunt you when you sleep

[@MrStacy1974]

I feel like I've seen this video before 😉

[@muammarmukhsin2315]

Ford Escort MKII spotted!

[@dave1secondago]

great build that was

[@average_lead_eater]

Rest in peace coffe🙏🥲

[@seanhorton3811]

Your ASMR fans are in heaven.

[@carlosvieira9462]

Excelente trabalho.

[@peterwall9896]

Top content Matt 😎❤️❤️❤️❤️❤️❤️❤️

[@GRAHAMAUS]

Chevette, Chevette, Chevette, Chevette! (ra ra ra)

[@sabiondocolors325]

nice thank you for sharing your video , greetings from the south of Mexico. How nice to have all the equipment to do it, those very sophisticated machines. not even working two whole lives could he buy one of them. Here the minimum salary the day in Mexico is 135 pesos all day, equivalent to 6.75 dollars. outside of my hands, I have only been able to buy a makita drill and I spent 3 years saving together with my wife

[@renegaderieths5629]

Are you using Inkscape to draw your parts?

[@Urchfab]

Emachine shop

[@bannangammasteknik3940]

Kereen

[@scottthomas5450]

How much for all of the plasma cut sections UK postage 👍

[@Urchfab]

Il have to price that up bud.

[@moderatefkr6666]

​@@Urchfab That was essentially my question too. You do some Very impressive work here Matt. Is this jig for any particular type of frame? I would be interested in one that can do a variety of frames for adventure bikes and cafe racers, as well as road and race bikes. I don't have access to the machining facilities you have. I'm sure I'm not alone in being a potential customer.

[@flaviocosta5767]

5:47 ...nice

[@picsi-software]

It would be nice to get the drawings :)

[@handonoreticulatus]

Bad coffe moment 😭

[@davidwalters4014]

RIP coffee cup

[@riffraffchoppers]

You’re Really paranoid Of that grind dust huh ha

[@davidhudson8415]

The floor is level 🤣

[@SalvageMasterEssex]

That's what I thought, if I tried that in our workshop level would be off scale due to dodgy floor :-)

[@alegre681]

1:31 noooooooo

[@TheSnup23]

Watch this video: kzbin.info/www/bejne/r6CZqoKohbWLgNE Message in English at 31:38 minutes!

[@ruglund]

nice video of your fabrication process mate - shame about the cuppa

[@Urchfab]

Cheers.

[@Ed70Nova427]

Hey Matt, Hope you can check this video. The guy has the same plasma cutter you have and seems to be happy with a dry air improvement he made. I don't know where he is located but maybe you can go check his cutter's performance comparing it to yours. Might just be a help in your fabrication business. kzbin.info/www/bejne/pZ-UqIGZj5qWg9E Like the video and I had to laugh when I saw your reaction when you showed that cup again. Ed D

[@SửaChữaBảoTrìXeTayGa]

Helo 👏👏👏👏👏👏👏👏👏👏✅✅✅✅✅✅✅✅✅✅✅❤️❤️❤️❤️❤️❤️❤️👉👉👉👉👉👉👉🔔🔔🔔🔔🔔🔔🔔🔔

[@tientruong-dx6ko]

Poor thể cup

[@sweetchildomine2276]

V

[@tonguterpase1630]

You are too fast, why not send a normal video

[@Pastuhowlad]

Like

[@mitchellkennedy3556]

Step 1. But 80k in tools. Step 2. Find magic experience beans 🫘 Step 3. Return to school. Sounds easy enough