HOW TO Build a Foil Board | Volume 2 | Shaping and Track Instillation

[@charleswilson7570]

Thanks for taking the time to put this together. Definitely one of the best foilboard build videos out. Video and audio are on point! Can’t wait for part 3 🤙🏼🤘🏻

[@Lanceisoutside]

Much appreciated Charles. Sorry it took a while. Im stoked for part 3 also.

[@scottewers9507]

Hi Lance, Have you ever had an issue with a loose strong box, or a strong box getting ripped out? I see you re-enforce your boxes with pour foam top tubes. I like that approach. Seems like a great way to add the right amount of enforcement while keeping the weight down.

[@Lanceisoutside]

Hi Scott, I’ve have had issues before, yes. But not from the box getting ripped out of the foam and board. My issues have been water getting into the board caused by improper fiberglassing techniques. Causing delamination around the pourfoam boxes. The other time i had problems is from not having the pour foam go all the way through to the deck. I made the block only 2 inches thick with perforations to the deck. Foam block eventually ripped away from the eps foam inside. But did not rip off from the carbon or tracks. Hope this makes sense. Just have the high density foam go all the way through to the deck if you’re going to use it.

[@scottewers9507]

@@Lanceisoutside thanks Lance good advice, I’ll run it all the way through with the 6lbs pour foam.

[@Lanceisoutside]

@scottewers9507 you’re welcome. I use 8 pound pour foam.

[@drgeatman]

nice Lance. thanks for sharing.

[@Lanceisoutside]

You’re welcome, Gordon. Hope all is well.

[@joebenjamin6139]

I love it, as pure and simple as it can be. Great Job!!! waiting for the next one.

[@Lanceisoutside]

Thanks so much, Joe. Next segment is gonna be fun Vaccum bagging it. My first time.

[@erikalane2807]

Great job putting this together and sharing your ideas 😊

[@BabbittdaWabbitt]

Thanks for sharing. Gotta love KZbin-U !

[@Lanceisoutside]

My pleasure! Thanks for watching.

[@jeromesurffoil7033]

@Lance is outside Nice work man!

[@Lanceisoutside]

Thanks Jerome!

[@RhettBonner]

I met Eric in Hood River! Great guy! How is your board working?

[@Lanceisoutside]

Awesome Rhett! He’s Really good guy. I haven’t been down there yet to Vaccum bag the board. Eric has been out of town most of the month. We will be glassing it in September for sure! Video to follow soon.

[@robindeakin5468]

I see this was fitted 1 years ago! I want to fit a PVC twin hydrofoil box on my board , therefore my question is: did the box work and not break off? and are the plastic inserts strong enough for the hydrofoil attachment? P.S has anyone on youtube used these PVC plastic twin boxes successfully? without losing their hydrofoil?

[@Lanceisoutside]

This is still my main board i use for wingfoiling. Ive been using these boxes for 5 years now with no box failure. If you place them in the foam surfboard with out any strong reinforcement. Then you will lose your boxes and foil. I reinforce them with the 8lb high density pour foam. Works fine. My friend glues wooden stringers to them and wraps them in carbon fibers. There are multiple ways to install them.

[@Lanceisoutside]

“Dorsal” 10 inch longboard fin box is the brand

[@robindeakin5468]

thankyou, I will now make my track box as a winter project as tempertures are dropping fast in uk, cheers robin@@Lanceisoutside

[@Lanceisoutside]

@robindeakin5468 you’re welcome. Take your time, think it out and enjoy the process. Cheers

[@RaulMartinez-ex2pc]

fart in 5:35

[@Lanceisoutside]

🤣🤣 finally someone noticed 🤣