How to Build a Memorial Flag Display Case

[@mcleod55]

That was better than any gift you could have bought. Nice job!

[@jhscheppele2448]

Thanks for the shout out to the veterans.🇺🇸👍

[@donpresser16]

This is amazing how you made the display case. I had a friend who just passed away at the age of 83 and his 2 Daughters both received Flags and I thought it would be very appropriate if I made the cases for them seeing as how I knew their Father for over 30 years. His wife passed away 11 months ago also. I know both Daughters are going to like this very much.

[@jamescooley7849]

From all veterans and all who served I salute you. Great job and well done. I hope my children and grandchildren have the heart to make one for my flag when it comes!

[@wcrandellsr3393]

Good job...your grandfather would be very proud. My father was a WWII veteran. He was K.I.A in Korea, Sept. 01, 1950. I was three and have missed him to this day.

[@joshferguson4660]

Great Job! That walnut came out really nice and gives it a custom look. Being crafted for a loved one makes it even more special. I'm sure you father will cherish the gift for many years to come. Keep up the great work!

[@masonhall7361]

Love this. My grandpa also served in WWII and this is a great way to honor the greatest generation.

[@cspann2872]

Thanks Aaron- just the incentive I was looking for. What a wonderful tribute to your grandfather! I will be making one for dads flag. He was stationed in Okinawa with the Army Corps of Engineers during the Korean Conflict. He was refurbishing heavy equipment stored there after WWII and he just passed at 91.

[@jeffreyfelder7981]

Thank you, awesome work, my Dad just passed and I'm planning on making a Flag case for his... really great video....

[@Slottech1965]

Great Video and an Honor to you and the American Patriots that have served our great country.

[@timbruce7694]

Very inspiring, my 89 year old grandfathers funeral was today and I plan on making a case just as beautiful as the one you made. It's for sure more special than just buying one. Wonderful job :)

[@georgewest153]

Great job. Looks better than some I have seen coming from fully stocked shops. I especially like your can do attitude. Don't have all the tools, you may want for a project, so you adapt, and use what you do have. Congratulations on that alone. Splendid ending, with a shout out to the troops. They make our freedom happen, and we should never lose sight of that.

[@sandrahoolahan9391]

Thank you my husband is going to try and do this for my Dads flag that is a 100 years old 🇺🇸

[@Deejerbeej]

Thanks for that info. A good friend is losing her husband to cancer and asked me to build her a display case...I've been doing custom woodworking for years but never made one of these so your video really helps...thanks again

[@Hoehihoh]

I loved this. Both the intent behind it as well as you procedure and the product. Way to go!

[@ozthebuilder]

Hey, just wanted to drop a comment and say this video really helped me when I was making a pair of memorial flag display cases. Going with a hinged frame and a strong magnet was incredibly versatile. Thanks for the help!

[@robertsprojects7698]

nice video, and thank you to your grandfather for his service

[@oneguy4196]

I've been active duty for 17 years and counting. I have a few flags from my career. I was about to just get rid of them or give them away but I will use your video to make a case and keep them in the family for years to come. Thanks.

[@mariolombardi3864]

Great job. I need to make one for my father-in-law's flag.

[@soilsrus]

Thanks for your ideas on modifying the design. I love how it turned out!

[@valeryrigot9740]

Nice work, I really liked the tenoning jig tip!

[@ryansimmons3818]

Absolutely LOVE this piece! 👌🏼

[@steveminla]

Well done!! Great video. God bless you and your family for their service.

[@Phobophile]

Thanks for sharing this. I was looking at the same plans from Woodworkers' Journal, but I quite like some of your modifications. This is just what I needed to get started on a case I've promised someone.

[@sheilahill3215]

I just wanted to comment and tell u this video is really helpful! I am having someone make me a box for my husbands memorial flag display case. I like the display case you designed! Also, making it with a hinged frame and a strong magnet was a great idea. Thanks for the help! Paulino Costa Paulino Costa 3 years ago wow... It's a very great job... congratulations! Samtagri Samtagri 3 years ago Hey man, cool to put such a personal project online. Nice video. 2 Tearyatobitz Tearyatobitz 3 years ago Awesome job! It would have been cool if you got like your grandfathers name etched into the glass. Just a suggestion 2 smahalko smahalko 1 year ago Well done!! Great video. God bless you and your family for their service. Josh Ferguson Josh Ferguson 3 years ago Great Job! That walnut came out really nice and gives it a custom look. Being crafted for a loved one makes it even more special. I'm sure you father will cherish the gift for many years to come. Keep up the great work! 1 Derek 10 months ago Thank you for making this video, I'm going to start work on my grandfathers flag case here pretty soon, any recommendations on it after you finished? Things you would do different if you were to do it again? PojntFX Classics 3 years ago Yeah, I'd love to see a router build! Peter Anger 3 years ago Great job, Semper Fi! 2 Chuck Abbe 1 year ago Thanks for this video Aaron. I have been asked by a friend to build two of these for her recently deceased husbands flags and I wasn't sure how to proceed. Your video was very easy to follow. I can't wait to get started! Mason Hall 3 years ago Love this. My grandpa also served in WWII and this is a great way to honor the greatest generation. Christian Weaver 2 years ago Great build, thanks for sharing! Roberts Projects 3 years ago nice video, and thank you to your grandfather for his service Justin Prewitt 3 years ago Good job. It looks great! Humus Workshop 3 years ago Nice project! 1 Yedaiah 3 years ago I loved this. Both the intent behind it as well as you procedure and the product. Way to go! Abby Love 1 year ago Looks fantastic. I’m in a similar situation, and I’d also like to make a case for my dad. Although, I don’t have the tools to build it. Any suggestions on what I should do? Thanks. Roy Henderson 3 years ago Harry was the one who told me to google Woody Hyezmar. And yes, the woodworking book is still available. Up next AUTOPLAY 9:43 NOW PLAYING Building a Memorial Flag Case w/ Your Router & Tablesaw Infinity Cutting Tools 19K views Frye Women's Casual boot Brown Carson... Brown Carson Leather Boot - Women. A little bit country, a little bit rock n'... Ad $139.99 • Zulily 13:20 NOW PLAYING Build Your Own Flag Display Case, DIY JON'S DIY 32K views 5:55 NOW PLAYING How to cut over 45 degrees on your miter saw! Sawdust and Wood 164K views 29:20 NOW PLAYING Removing Popcorn Texture? Here's the Step by Step method of removing it That Kilted Guy DIY Home Improvement 450K views 8:13 NOW PLAYING A clever idea from an old motor! Why didn't I know this before! HandCraft Recommended for you 13:07 NOW PLAYING 10 Beginner Mistakes Installing Vinyl Plank Flooring Fix This Build That 1.4M views 13:18 NOW PLAYING Make Double Sided Rings out of Coins - Tips for Beginners fencekid Recommended for you 8:36 NOW PLAYING IS THIS THE MOST USEFUL TOOL IN THE WORLD? Watch And Decide!! (5-In-1, 6-In-1,Painter's Tool) The Honest Carpenter 813K views 16:23 NOW PLAYING How to Make Epoxy Cutting Boards YouCanMakeThisToo 570K views 10:30 NOW PLAYING This joint looks complicated, but it's only TWO cuts!! What would you call it?? 3x3Custom - Tamar 1.4M views 17:22 NOW PLAYING How to install baseboard and corners like a pro CanaDIYan 518K views 10:18 NOW PLAYING Dust collection adapters shop vac to PVC made fast on the table saw Slow and Expensive 602K views 12:20 NOW PLAYING How to Make: Veteran's Memorial Flag Display Case The Muz Shop 12K views 7:10 NOW PLAYING Flag case. In honor of the 1-7 Field Artillery on Veterans Day, 11-11-11. Steve Ramsey - Woodworking for Mere Mortals 35K views 10:56 NOW PLAYING Making a "US flag" end grain cutting board mtmwood 682K views 12:03 NOW PLAYING How to Build a Flag Case thegreenworkbench 26K views The Original Brown Paper Floor: DIY Alternative To Hard Wood Floors AnOregonCottage Recommended for you How To Build A Track Saw Austin Denherder Sailing VALERIA 1.4M views Turning a tree into lumber using a homemade Alaskan Mill David Groth Recommended for you ASALAS WW#5 FLAG FOR MY FATHER - Memorial Day 2015 Andres Salas 17K views Saved to Watch later

[@chucktherunner]

Thanks for this video Aaron. I have been asked by a friend to build two of these for her recently deceased husbands flags and I wasn't sure how to proceed. Your video was very easy to follow. I can't wait to get started!

[@PopsCustomSignsLLC]

Thanks for the video. I searched for a video like this and yours was the first one to show in my feed. I will be making one similar, except the one I will be making will have a cremation urn in the base. I subscribed to your channel based on this video. Thanks again.......and to your Grandfather I offer him a Heavenly heart felt "Saaaaaaaaaalute!"

[@scottbitterman1331]

Love the case do you have a video on how to make the jig

[@fxmckee]

Nice job but you glossed over the 22.5 degree cut that I've found to be the biggest problem. I use a radial arm saw and am struggling to safely make this cut.

[@Samtagri]

Hey man, cool to put such a personal project online. Nice video.

[@dantheruggedman5485]

Why couldn’t you use compound miter saw to cut the 22 degree angle?

[@billwilliams5963]

Good job man.

[@sallywnuk8595]

Watched the video but need more info on how to make the 22 1/2 degree cut safely. Please

[@boxxjw1]

I'm building out of red cedar and my 22.5 angle fits wouldn't work I had to go to 20 degree on the table saw and it fits alot closer but throws my 45 off

[@paulinocosta2849]

wow... It's a very great job... congratulations!

[@justinprewitt6794]

Good job. It looks great!

[@Renard_bh]

Grate job on the flag box. In my opinion i think if you make a small label or gold plank with details of you grand fathers info 😇👍🏻

[@BraxtlyTools]

This is another great video! Keep up the good work. Emmy Braxtly

[@darsweave]

Great build, thanks for sharing!

[@BCdesign1]

Nice work,the case looks great!

[@TheLosiracer]

Why couldn’t you cut the 22.5 degree cuts on your miter saw?

[@swanaviation]

Well done, Aaron.

[@tommyblanche6550]

Very nice piece

[@duvalian]

Il’ll be doing this for my Union Jack I had during the first gulf war. I can only hope and pray mine comes out anywhere near as god as yours mate lol. Great vid btw, and I’ve subscribed 👍

[@Tearyatobitz]

Awesome job! It would have been cool if you got like your grandfathers name etched into the glass. Just a suggestion

[@Sklallamstrong]

Thank you for making this video, I'm going to start work on my grandfathers flag case here pretty soon, any recommendations on it after you finished? Things you would do different if you were to do it again?

[@q2anger]

Great job, Semper Fi!

[@webcrawler3332]

Great Job! Can you tell what Dado Stack you are using on the table saw? Mine is a 7430 and i dont have a long enough arbor to put on on. Curious how your are doing it? Thanks!

[@bobscruggs8886]

What do you mean you can't cut 22.5 or 45 degree on table or miter saw? I did try these cuts for a flag case and they don't work out why ? thanks

[@williamhoward8319]

great job i need to build mine will have ribbons and medals in it some way

[@abbyloveluzern]

Looks fantastic. I’m in a similar situation, and I’d also like to make a case for my dad. Although, I don’t have the tools to build it. Any suggestions on what I should do? Thanks.

[@mihumus]

Nice project!

[@Rubbernecker]

Well done.

[@mitchsorrell2861]

I think your box is sharp!

[@jimcarter4929]

I want to make one of these, but incorporate a lower box or something for my Dads army picture and some others.

[@lickitysplit2413]

Hey Arron, I have what might seem like a stupid question to seasoned woodworkers but as I am a newbie to woodworking I am having trouble figuring out where to make my cut on a longer than needed board in order to place it in the tenoning jig for the angle cuts; by the way, I made a jig for my table saw following your pattern and it works well, thank you. My question is this, after I have cut one end of the bottom piece of wood for the flag box at 22-1/2degrees and I have a longer than needed piece of wood for the bottom, how does one know exactly where to cut the board off to perform the opposite 22-1/2 degree cut in the tenoning jig? I simply took an eyeball measurement with tape measure to the adjacent side of the first 22-1/2 degree cut, got the measurement and then added this measurement to the other end of the board to figure out where I needed to cut the board off. Just wondering how one would figure this out without a set of plans already in hand. My father's flag needed different measurements for a flag box for some reason.

[@sonnybeltran7096]

Awesome!! 🇺🇸💪🏽👍🏼

[@audreyyoung5154]

I'm going to try to make this for my dad flag that I got when he passed away

[@254JROCK]

Great job !!

[@royhenderson984]

Harry was the one who told me to google Woody Hyezmar. And yes, the woodworking book is still available.

[@zerocaster6818]

Hooah. You made my day.

[@tooljunkie555]

Very nice..how long are each of the pieces I had a relative recently passed away he was a curry and/or that 1 and make one of these for him also just need to know the lengths of the 3 pieces

[@bobscruggs8886]

ok I got it the 22.5 is a deep cut not sure I understand it but will have to cut the miters upright thought this was going to be easy fooled again.

[@tooljunkie555]

Never mind found the dimensions in the plans in the link you left below

[@jeezee007]

nice work!!!

[@daveday7396]

Thanks for the help. Good stuff. I plan to make a case for my sons flag. SSG David F Day KIA Baghdad Iraq 21Feb2005

[@sandrahoolahan9391]

Wish you could make one for me thanks so pretty ❣️

[@cameronackerman4396]

What wood did you use

[@cameronackerman4396]

Thank you

[@pojntfxclassics3132]

Yeah, I'd love to see a router build!

[@TheShadow19962810]

my dad is retired army

[@jeffroth6575]

Hey nice work can you make me one

[@jasonshrout8921]

Hooah!

[@davidbarger-cw9cd]

How to build a memorial flag case

[@rosemarykent4353]

T gold

[@kg7yts187]

Could you make one for me to give to the wife of one of my friend who died? He served in the Army.

[@stephenpeterson7479]

I hate fast motion videos!