How to Build A Paint Booth

[@countchockula6111]

Right when I was about to cut into my savings to buy a painting booth Justin comes out with a tutorial Tuesday for one

[@ashtls6273]

just when i’m thinking “I should build a paint booth,too lazy going outside especially if it’s night to do paint jobs” and boom your notifications pop out what a coincidence 🤣

[@animousworks]

Just built mine today with your instructions. Hella cheaper than buying a replacement and works better than the amazon one i had lol

[@oliverstevengodio7160]

Studio G's video really helped me, I'm an aspiring builder but lacks knowledge on how and where to start. luckily this channel provides basic and easily understood contents to help aspiring builders like me

[@serdaraytemiz]

Definately use filter... It will slow the flow of air as well so you paint is not pulled in different directions when you are painting. Helps avoid fires as you are using an open fan. it wont stop it but will help prevent. dont forget to replace it. It will protect the fan from being destroyed due to paint build up on it. If you mount the fan from the from you can actually put all the realated parts in the bin and store the box away.

[@WD30th]

An exhaust fan and a duct hose is one of the missing pieces to build one. This video on the paints and the fumes are very helpful input thank you for you experience about this.

[@Somethingwontchange]

usually i paint with acrylic paint so i never plan to build/buy paint booth but since i started using lacquer based paint i thank you for this tutorial

[@kishin_a]

That "crying children" got me good haha. Great tips as usual.

[@JGrove303]

How do you safely wire the vent for wall outlets use? Aren’t those tide into mains power with a switch to operate them?

[@hafizizudin3645]

The only trouble that I have now..... Laziness 😂😂

[@qpiekkola1715]

Time to build a booth! The exhaust fan is a genius idea!

[@shinjinagato]

Thanks from malaysia 😊

[@harazization]

New week, new trick Thanks brooo

[@minghuifoong378]

TIME TO BUILD ONE THIS WEEKEND. PERIOD.. hahahaha Good vid bro

[@lifeneedsmorechill]

All cool and all for the equipment but what i NEED most for a paint booth is a spare ROOM, how do i get that?

[@zacharytaplin375]

This guy is my role model.

[@silverhand.johnny]

From reminding me of my love for Gundam to tutorials for my own studio (in the future). Thank you!!

[@Darknerdn64]

I started watching vids 2 weeks ago and was looking for the paint booth video 😂

[@Ball-destroyers]

Hey justin did you use an extension cord for the power cord cause it looks like it

[@kaosthedemigod8189]

I built one 2 weeks ago...I wish this video was out then...I used an inline duct fan and found a carbon air filter. I messed up my configuration and have to take it apart and rebuild it with the filter inside the box.

[@geoffreylewis5435]

Thank you for this. Been thinking about getting into Gunpla and really getting serious about customizing. This will make that possible.

[@땃쥐-v4i]

Now i need my own room

[@sandymercado4998]

Do you need a spark proof exhaust fan when you are using solvent base products?

[@axl60]

YES. He kinda glossed over it, but YES. Unless you’re doing strictly acrylics. This is still a really good video.

[@ranid.p.6909]

I am planning to make one soon. Your tips are duly noted. 😁

[@placross]

Great video Justin! I was thinking about this just last week! Short and straight to the point. Love it!

[@Nu_Chowe]

Do you need a filter and why? Also what is the least amount of cfm you would recommend the fan or vent to have. Also I have crying children's. That hit hard

[@andyangtoonkeng201]

Very useful,thanks for sharing

[@DaniloCentenodbc]

i am hoping you could suggest an airbrush set for beginners on your next tutorial. thnx. stay safe.

[@jankyxvi921]

Can you tell me if this is a good idea if in planning to use Spray cans? I'll eventually get an airbrush but can I do this and use Spray cans ?

[@placross]

It should be fine. You are basically saving yourself some time later. If you are going to paint your kits I'd say invest on a spray booth. Makes your live easier!

[@ashtls6273]

Janky XVI yes you could,but since spray can area of spray is bigger than airbrush.A bigger paint booth is recommended

[@jakallucifer239]

Tnx hoping to make gundams like that. What best or prefered for customize gundam? Rg? Hg? Or ??

[@mkvenn77]

Glad I stumbled onto you. I've been trying to figure out a better fan other the a box fan. 👍

[@wfong92]

Nice tutorial very helpful 👍🏻

[@giant133]

Can you show how you have it set up

[@christophercaras3091]

Heloo, great tutorial, i was wondering, what kind of filter do i need if will use one?

[@fmulder94]

Is the pre-packaged booth from Amazon that you recommend good for using lacquer based paints? I keep reading conflicting information on which fans are okay and which aren't and what is safe and what isn't.

[@fmulder94]

This might be a dumb question, but how do you turn on a fan like that without it being wired to a wall switch? Is there a switch on it?

[@ryanchan536]

Is it possible to just paint it on the box without the fan but with lightings

[@markkirbybenitez355]

Can you use a Gundam marker for coloring tutorial for beginners If they don't have money to buy Tamiya colors and spray colors

[@leighsgunpla6116]

Do you have tutorial for beginners? Like what tools are needed on getting started building a gunpla

[@kevinpham3805]

hey could you make a tutorial on how to remove seam lines :D

[@thebomtasticraidenchannel2608]

This is going to be helpful

[@feliztan3737]

I love the previous hair 😁

[@PatrickOhm]

nice video, thanks for sharing

[@Einhauen_jager]

Can i use the back of a fan for the exhaust fan?

[@tuanau6449]

my room to small, can i build a paint booth in my bed room with small size? i hear some lacquer paint very toxic, is it ok?

[@jasoncombs3232]

I use a 20x20 box fan with a pack of 20x20 air filters from home depot. $30 for everything.

[@AdraTheGhost]

Would that still need a hose then?

[@hyp3rx312]

Wait do I put the filter like just outside the cover or do I replace the cover with the filter

[@erraddict]

Do you ever get pain on your walls/carpet etc?

[@-HRSH-]

Thanks it's a great help, i was always wondering how to make one

[@robmcmuffin8453]

awesome video man! love all of the safety and cutting advice as well! thanks for sharing!

[@LeoNelBuilds]

Pretty cool, I built one similar and it works great!

[@jamborabbit7281]

Thanks for this. Ive been thinking about making one but was unsure how so thanks for the guide man!!

[@azynooky11]

Good video. Thanks

[@logunder4597]

What type of filter should I use?

[@IndraBoham]

tutorial LED USB please, thank you

[@Eggsi__]

Might be a stupid question to ask but, Would you still need a mask to wear?

[@tutelnaha6081]

I all​ready​ had one but why not 2

[@Gunplahrazzi]

65k wow 🤩

[@ChrisDeger]

Great video

[@pizzalord3n]

Awesome 👍

[@mikazukiaugus8422]

Damn nice tutorial as always, hopefully u make about pla plate for next tutorial tuesday :)

[@seanhigby2656]

Looks nice man! I think I might make myself one, but I'll put it in my garage, if I can find some room, there has to be room. Right?

[@SazParts]

Question, if I paint outside, do I need a paint Booth?

[@MabushiiKage]

Has the paint ever been a problem during re-assembly?

[@jaredjjacobs]

i cant believe the only thing i already have for this is the exact same ring light

[@d4nkm33ms__8]

"Away from crying children".... Huh it does help

[@BuzzBoi315]

Wouldn't help for me. They're on the inside, too.

[@d4nkm33ms__8]

@@BuzzBoi315 I feel ya m8..... Atleast they get to see the work

[@moistmercenary]

"Safety first" -Last 30 seconds of video

[@nordindelosreyes3473]

Thanks for this very helpful video!! Now I can avoid lung cancer!!!!

[@kprosales13]

I haven't finished watching it but already slapped the like button. For some reason I already know it'll be an awesome vid.

[@Maramara13Fly]

Is a n95 mask good for painting if I'm painting outside? Thanks

[@Oneklickmedia]

No always use mask specifically design for paint, trust me don’t put a price on your health

[@Maramara13Fly]

@@Oneklickmedia thank you for the tip Sir. Yes I was able to buy a proper mask about a year ago. :)

[@arehandoro_daio]

Yes them crying children, chickens, and cows outside are quite annoying lol ;) ... especially when painting lol Great video straight to the point and tip#3 seems important.

[@giant133]

I’m stuck on the power supply part

[@drake-ur1mf]

how im build a studio?

[@simonsinaga9243]

Finally uploaded @a.simon.s

[@abcgefp]

Gotta protect your gunpla from those crying children

[@oni_chan8404]

Wow

[@zhangedward3044]

It the best to have your paint booth negative pressured.

[@darkclaw7009]

🔥🔥

[@enrikingoftusok430]

Im making a oo xn raiser

[@orichumo]

is really just a fan in a box uh? i seems like easy enough to make by your own

[@benjamin8399]

you didn't talk about the electricity part :(

[@IcarusIcarus76]

Bathroom exhaust style fans canot handle the fumes from lacquer paints/thinners etc, only the centrifugal sirocco industrial blower fans can.

[@marcavillanosa1466]

Built the same, just smaller

[@kipasangin2782]

bro, teach us how did you get your accent ? it is not Fillipino at all

[@justicefreedom5985]

Hallo

[@VuPham-ys7zs]

Phụ đề tiếng việt đi :< ko hiểu j hết !!!

[@hazetv8754]

Crying Children make your gunpla easy to break

[@enrikingoftusok430]

Mg

[@FetusDeletus9336]

instructions not clear i still hear children crying in the basement

[@epsilonanimations71]

No not the chickens!!!!!!!

[@enrikingoftusok430]

Im just 13yrs

[@mother_ducker1123]

Ummm. I rhink I'll stick with painting outside

[@Nu_Chowe]

Them damn crying kids

[@adnanchowdhury4050]

Now I can paint better.