Some people brought up some concerns about the capacitor placement which made me take a look at it now that I've flown this quad for a bit. It did look like it was going to cause a problem eventually. I decided to remove the tape, shorten the leads, and solder wires onto them. Then I used heat shrink tubing to cover the exposed spots. The cap is in the same place, it is just better protected now. Thanks to those that pointed that out!
@Kars.-3 ай бұрын
The buzzer you got can be turned off by plugging in the battery again and removing it. Just once, as soon as it is removed for the first time plug it back in wait 2 seconds, unplug and you are done :)
@William_NS3 ай бұрын
This is the reason to buy Vifly buzzers. I bought a couple flight buzzers once because the Vifly buzzers were out of stock and I learned very quickly that all buzzers are not created equally!
@DanielJohnFPV3 ай бұрын
Good tip - I may try that next time I fly.
@Kars.-3 ай бұрын
Same here haha, bought a couple from aliexpress and yeah button only..
@Lift.Life03 ай бұрын
I learn much more by watching your video than by paying a $500 course on how to build a drone, thank you, new follower
@DanielJohnFPV3 ай бұрын
Appreciate that! Hope it helps. And hope you got a refund! 😅
@bjohn83652 күн бұрын
Thanks!
@DanielJohnFPV2 күн бұрын
@@bjohn8365 thanks so much!! ❤️❤️
@dondupuis40072 ай бұрын
I use heat shrink to go over antenna and the antenna mount, to keep antenna from coming out of holder. Great video, enjoying it.
@DanielJohnFPV2 ай бұрын
Over the 3d printed mount? That's interesting - do you notice a difference?
@xwing01783 ай бұрын
i flipped my stack around put the cap in the front then flipped it around in betaflight by 180 degrees. Works good
@DanielJohnFPV3 ай бұрын
Good idea. I considered this, but didn't cause I was too lazy I suppose 😅
@WIL_FPV2 ай бұрын
That's the clean quad, broooo, love it 😍
@DanielJohnFPV2 ай бұрын
Thanks man! Still going strong after a year +
@dondupuis4007Ай бұрын
Everything seems to be holding tight, first I tried it on the Tanq put out by Rotor Riot, when I learned about the heat shrinking antennas from Shaw in the you tube they put out for step by step build. Now I do it on most all my drones that have 3d printed antenna mount, I am a newbie at FPV, so I have had some pretty hard crashes to test the heat shrink method. Some day I crash so much I question why I am enjoying FPV, but slowly getting better.
@kijin_13 ай бұрын
wow what an amazing drone
@DanielJohnFPV3 ай бұрын
🙌🏼🙌🏼
@oscr_zen3 ай бұрын
fantastic work, amazing shots!
@DanielJohnFPV3 ай бұрын
🙌🏼🙌🏼
@geo.explorer3 ай бұрын
SUCH a great resource!! Love the sick action shots at the end too!! 👏🏼 👏🏼 👏🏼
@DanielJohnFPV3 ай бұрын
Thanks! Tried to explain as much as I could 😅
@73FPV3 ай бұрын
I really like your build video. Its better than my apex LW build video. I enjoyed your edit. Good work.
@DanielJohnFPV3 ай бұрын
Glad you got something out of it! 🙌
@efelton26993 ай бұрын
The mamba stacks are the best out there. I have the aio in my Aos3.5 and the mini stack with the big dog 66amp esc for my aos5.5
@DanielJohnFPV3 ай бұрын
I’ve been curious about the AIOs. I have some build ideas and they seem worth trying
@mordoortas5323 ай бұрын
very nice video, congratulations Please make a video while configuring betaflight so we can learn the settings.
@DanielJohnFPV3 ай бұрын
I hope to eventually 🙌🏼 I’ll have to be more organized next time 😅
@PrOpJuNkiE3 ай бұрын
It definitely sucks to get to that button but the Vifly is an absolute necessity for me... There is an easier way, just plug the battery right back in until it completes it's series of beeps then you can disconnect again and it's no different then having had pressed the button
@DanielJohnFPV3 ай бұрын
I'll have to try that next time I go out. I have it in a pretty secure spot now, but it does get jostled sometimes.
@PrOpJuNkiE3 ай бұрын
@@DanielJohnFPV Yeah, me too cause the button when accessible is more convenient for sure..... But the battery double tap is a good back up if it moves or something and you cant get it...
@protec28693 ай бұрын
I wouldn’t recommend placing the receiver on the fc, and get some smaller zip ties . But otherwise the build is awesome.
@DanielJohnFPV3 ай бұрын
I have some smaller ones now. I was just too lazy to go out and buy any when I was filming lol
@nasir-4442 ай бұрын
❤❤❤
@DanielJohnFPV2 ай бұрын
🙏🏼🙌🏼
@kubaaaaaaaa2 ай бұрын
I really want to build this drone! Would you be able to share some performance stats? Speed, battery life, max distance? I am new to this hobby and I am not sure what to expect :D
@DanielJohnFPV2 ай бұрын
Speed = IDK, but I have no problem keeping up with cars at 50mph. Battery life = 4-9 minutes depending on how hard you push. Distance = 🤷🏼♂️. I’ve been miles away. You don’t really want to go too far with these types of drones because you will always run out of battery before you’re able to get back and then you may lose your drone. Honestly for your first drone you just need to build something and learn to fly. I wouldn’t get too caught up in stats.
@kubaaaaaaaa2 ай бұрын
@@DanielJohnFPV Thank you! Would you ever consider doing a video on first budget drone? I saw a video couple months ago of a $150 drone, but I would love to see your take on it :D My plan is to first get a controller and learn on sim before building anyway
@DanielJohnFPV2 ай бұрын
@@kubaaaaaaaa I have definitely considered it. The only problem is it has to be analog, and I’m too cheap to buy analog goggles 😅
@kubaaaaaaaa2 ай бұрын
@@DanielJohnFPV makes sense bro, hopefully soon you will grow on KZbin and be able to make this video. I’ll be waiting 😃
@DaywalkerFPV3 ай бұрын
I had the same issue with missing a stack screw. It was really annoying. Totally held up my build for 2 days until I could get some counter sunk screws. For $100 that's some BS for sure!
@DanielJohnFPV3 ай бұрын
Did you buy yours recently? I was in one of the first waves of releases last year, so it might have just been one of those early bugs that gets ironed out over time.
@DaywalkerFPV3 ай бұрын
@DanielJohnFPV I got mine about a month or two ago. But yea hopefully they got it all sorted out.
@FPV-oh4do3 ай бұрын
Hello, blogger, the receiver and its own wires have been arranged on the FC gyroscope. Will the magnetic field affect the gyroscope after the wire is energized? Many bloggers say isn’t this great?
@DanielJohnFPV3 ай бұрын
I have had no problems after one year of flying.
@h.hristovАй бұрын
Has DJI announced the O4 Air Unit yet?
@DanielJohnFPVАй бұрын
Unfortunately not. Hopefully soon - also hopefully it’s the same size as the O3 🤞🏼
@73FPV3 ай бұрын
i subed up and liked
@DanielJohnFPV3 ай бұрын
🙏🙌
@xXEshanXx3 ай бұрын
nice video, love from italy. I'm obsessed with this world and I'd like to get started too. What do you recommend for starting?
@DanielJohnFPV3 ай бұрын
Thanks man 🙌🏼 Definitely start by getting a remote and a simulator. That’s a good way to see if you even like it lol. I use a Radiomaster Boxer
@xXEshanXx3 ай бұрын
@@DanielJohnFPV hi, it is good radiomaster pocket also ?
@DanielJohnFPV3 ай бұрын
@@xXEshanXx I have not tried the Radiomaster Pocket. It is smaller - more like a Playstation controller. I like bigger controllers because they are easier to pinch-grip. However, I am a big fan of Radiomaster. I think they make good products.
@ghost08dog3 ай бұрын
Hello, please tell me. I want to buy my first quadcopter. And I want a small one (5 inches), but with the ability to mount a GoPro, a long flight range and a flight time of 15-20 minutes (I know that I’m asking for the impossible). Maybe you know some ready-made assemblies. Thank you.
@DanielJohnFPV3 ай бұрын
Nothing pre-built will get you those specs. Maybe a Helion, but that’s a 10” drone. I understand wanting a FPV drone that flies 15-20 minutes, but the reality is that is a REALLY long time to be piloting the sticks. It is genuinely exhausting to fly so long, and you will end up with a lot of uninteresting GoPro footage. FPV is one of those hobbies where you don’t know what you don’t know. You WILL eventually lose a drone flying long range - it just happens. Learn to fly first, then get into long range. 🙌🏼
@ghost08dog3 ай бұрын
@@DanielJohnFPV Thx
@TimGeersProductions3 ай бұрын
Im on the fence: Diatone Mamba F722 55A VS Speedybee F7 V3 BL32 50A. Any recommendation? is there a big difference at all?
@clintonberechree69913 ай бұрын
speedybee should be a slight bit cheaper and they're mostly the same
@DanielJohnFPV3 ай бұрын
I haven’t used the speedybee so I can’t really comment on it. I think it’s a tiny bit cheaper, but it basically has the same function. SLIGHTLY less amperage. I’ve heard some people have problems with speedy bee boards, but that may have been in the past. I’ve also heard of people having problems with Diatone stuff in the past lol. I’ve been happy with Diatone, so I’ll probably stick with them if I’m using my own money
@Huntmx243 ай бұрын
Nice work! Which battery is your favorite on this and what are flight times like? I have another 5" build and some gnb 1300 6shv and also have some 4s 1500. Been wanting to build another quad in this frame.
@DanielJohnFPV3 ай бұрын
I've had flight times approaching eight minutes if I'm just cruising, but 5-6 is probably the average. Lately I've been using RDQ's 6s 1300mah batteries because the price point is so nice. However, I recently got some Tattu R-Line 4s 850mah for a smaller drone and love them. Next time I buy 6s batteries, they will probably be Tattus. GNB is great too, though I haven't tried any HV batteries.
@Huntmx243 ай бұрын
@@DanielJohnFPV nice! Yeah I get 4-5 min of light freestyle with the gnb 1300. Thought of trying some bigger battery's for some mountain cruising. One guy said he uses the gnb 1850 on a nazgul f5d for mountain cruising. Thought that would give a couple extra minutes.
@DanielJohnFPV3 ай бұрын
@@Huntmx24 it might give a few more minutes, but it gets to a point of diminishing returns for sure. I would only buy one to start with and then test it.
@Huntmx243 ай бұрын
@@DanielJohnFPV yeah for sure. Thanks for the replys.
@Huntmx242 ай бұрын
Question for you again. Have you tried using rocksteady on the o3 with this frame? If so does it work well? I have the rotor riot tanq frame and the way the o3camera is mounted there is to much vibrations so the gyro data on the o3 is messed up. Unstabalized its smooth but using rocksteady it doesn’t work. I don’t use a GoPro for now
@bted2223 ай бұрын
can you use a dji controller?
@bted2223 ай бұрын
and goggles
@DanielJohnFPV3 ай бұрын
You can, but you will have to leave the SBUS and ground wire attached to the Air Unit
@ghost08dog3 ай бұрын
Hi, what time of flight you get?
@DanielJohnFPV3 ай бұрын
It flies 5-8 minutes 🙌🏼
@style_texАй бұрын
Gopro is just a money waste if you have the o3 installed. And tbf theres better and cheaper actioncameras than gopro nowadays
@PrOpJuNkiE3 ай бұрын
Great video bud, but completing a circuit with the capacitor leads is a bit bigger of a deal then it sounded in the video, I mean thats direct contact to your lipo's positive and negative, have you seen what happens when you let the leads on a 6s lipo touch each other.....??? Let's just say, there will be smoke.... I am not trying to be a dick or anything, I think this is a great video but heat shrink those capacitor leads individually before you tape them up against the capacitor itself or mounting it anywhere cause you DEFINITELY DONT want to find out what happens ..... Great content bud!!
@DanielJohnFPV3 ай бұрын
That's a good idea. It's been through some gnarly crashes so far and has been fine. If I'm hitting anything hard enough to break a standoff and reach the cap, honestly the battery is probably on fire already 😅
@brandon96893 ай бұрын
You have 7 minutes to buy the parts on this list before one or more of them is sold out.
@DanielJohnFPV3 ай бұрын
So true 😅 I noticed the frame was already sold out when I posted the link - hopefully it restocks soon.
@brandon96893 ай бұрын
@@DanielJohnFPVit's just the nature of the beast when showing off a good build! Thanks for the video.