2019 ram promaster 159” wheelbase high roof. How to make DIY shelving wood
Пікірлер: 32
@mitchgroff263 Жыл бұрын
Thanks for all the detailed information you have provided in this video. I like your way of explaining every point. Keep sharing such great videos in the future also.
@andymejia12937 ай бұрын
😂
@marvellstarks24349 ай бұрын
Thanks you that's just what I needed. Gonna build shelves for my packout now
@jonathonhernandez29132 жыл бұрын
I like how this guy made shelves for snacks
@MrPropolis8 ай бұрын
nice shelves!! and such healthy food choices
@travisblackwell39952 жыл бұрын
Thank you for the video on how to 🙏🏻🙏🏻🙏🏻
@summit88872 жыл бұрын
Thank you for watching 👍
@TheDogWalksTheDog3 жыл бұрын
Well done I'm inspired to do mine .
@summit88873 жыл бұрын
Thanks! And good luck
@dennisj.plotsi92957 ай бұрын
Thank you for you video!🎉
@M4K9G22 Жыл бұрын
I can’t believe i didn’t think of adding a ridiculous amount of snack storage in my van!
@willschultz54522 жыл бұрын
Only problem is there is nothing to stop the boxes from flying out on the floor. You need a lip in the front or bungee cords to hold the stuff in.
@summit88872 жыл бұрын
It has a lip just didn’t get that in the video
@willschultz54522 жыл бұрын
@@summit8887 oh ok thank you. Yes you cant see it in the video 🙂
@FranciscoMarcialA Жыл бұрын
awesome!
@vinhgolf2 жыл бұрын
good looking shelf....i am wondering how the middle , 2x6 maybe 2x8 had the support?
@summit88872 жыл бұрын
there was holes already in the van supports that were circles. So I used a metal file and filed them all to be squares that were the same size as the bolts. That way I could pass a carriage bolt through the back of the support, then through a 2x4, and then on the front side I tightened it on with a washer , nut and a socket set.
@mikeymyke3 ай бұрын
You dont secure it to the floor as well?
@jefferylowe96102 жыл бұрын
Looks good! I'm thinking about doing something similar. Can you explain how you attached the initial boards to the van supports? Hardware used? Thank You.
@summit88872 жыл бұрын
Thank you. And ya it was a bit of a pain but there was holes already in the van supports that were circles. So I used a metal file and filed them all to be squares that were the same size as the bolts. That way I could pass a bolt through the back of the support, then through a 2x4, and then on the front side I tightened it on with a nut and a socket set.
@jefferylowe96102 жыл бұрын
@@summit8887 Are all 4 horizontal 2x4's attached to the van wall or just the 2? I was thinking about bringing my shelves out 20" so that I could standup my chip boxes on their side. Thoughts? Have you considered any modifications since your business is growing? Thanks!
@wags9777 Жыл бұрын
Nice
@daveboone1022 жыл бұрын
What happens when you make a sharp left turn?
@summit88872 жыл бұрын
My shelves have a lip / raised edge so no problem. Also have shelves on the other side and same thing 👍
@sawyersmith35282 жыл бұрын
What is the material list?
@taylorsutherland94472 жыл бұрын
Have you had any problems with your Promaster? Would you buy another?
@summit88872 жыл бұрын
No problems highly recommend
@kalihitino3 жыл бұрын
Wish I went with this instead of wire racks
@MK-wz7vc2 жыл бұрын
How did you attach the 2x4 to van
@summit88872 жыл бұрын
there was holes already in the van supports that were circles. So I used a metal file and filed them all to be squares that were the same size as the bolts. That way I could pass a carriage bolt through the back of the support, then through a 2x4, and then on the front side I tightened it on with a washer , nut and a socket set.