How to Build the Perfect Airplane Every Time | KSP 2

Hey guys, in this video I have a walk through tutorial of how to make a prefect handling airplane that doesn't spin out of control or fall apart in KSP 2. I hop you find this video helpful and enjoy!
#kerbalspaceprogram2 #ksp #space #tutorial #airplane
Chapters:
00:00 Styling and Frame
11:00 IMPORTANT PART
20:40 Flying

[@6thdriver482]

Very helpful, thanks !

[@Chladicli]

Nice tutorial, but one thing. The Center of Lift (CoL) should be behind the Center of Gravity (CoG) There are 3 options where to have CoL and CoG: 1. CoL is in front of CoG - suitable for slowly flying planes. As the plane will go at a certain speed, it will flip. 2. CoL is in the same place as CoG - with this configuration, you are able to achieve higher speeds, but again behind a certain speed limit, it will start to flipping. 3. CoL is behind CoG - this configuration is suitable for supersonic flights and for SSTOs starting as planes. It will fight with you at slower speeds, but at higher speed, it will become more stable. For a regular plane I would recommend CoL being slightly CoG (on the edge of the yellow ball or slightly behind). Tha plane will be stable enough and you will have no issues with it at all. Only when flying slowly, like 30-50 m/s will be not so possible. But it depends on the design of the plane. Also the landing gears. You can have higher front landing gear. It will help you with AoA during take off.Basicaly, the plane will take off by itself. And another point to landing gear, when building planes, the rear landing gears should be slightly behind CoG. When you will accelerate on the runway, you need to rotate your plane to take off. Rear landing gears placed too in rear of the plane will prevent the plane from rotating. Everything above i have learned in KSP1 🙂

[@halobuilder]

Well then, I am humbled by your knowledge. Thank you so much. I’ll keep that in mind while making my SSTO video

[@Chladicli]

@@halobuilder looking forward for the video :-)

[@Mr_Bruh656]

i dont know if this is my version or something but it keeps going left and i dont know why Edit: I Think i Figured it out. it was because the center of lift was to the left instead of in the middle.