How To Calibrate TPMS Sensors 2007 Impala ls

[@jdhed1601]

the little nub on the back of your "tire pressure reader" is for letting air out of the tires.

[@shobud7561]

You caint fix stupid !

[@mikesecondo2254]

Yeah...the little stub on the pressure gauge...this guy is blind!!..put the knife away!!!

[@alfatir14]

@@shobud7561 Your stupid ass watched the video though.

[@awols1er869]

Thanks

[@chrissnyder3430]

Brilliant!! Who knew???? 😃

[@ryangodbout1175]

the proper air pressure for your vehicle is based on the vehicle not the tire max pressure. read the inside door jamb on the drivers door for the manufacturer's recommended tire pressure for your vehicles. to high of pressure will cause loose feeling in steering and too low can cause excessive heat buildup.

[@artdogg50]

Much appreciated! I just bought a 2007 Chevy Impala and was surprised by this system. Haven't had a chance to try it out yet, but now I at least know what to do.

[@Silitama]

will this work with a 2008 impala

[@alphabayogmr.6482]

Hey thanks for the help! You saved my day literally guy. I had this exact problem Today and I was able to search immediately on KZbin and rather than pay for tow truck I was able to fix my vehicle, so thanks very much!! appreciate it,?keep those videos coming buddy!

[@Pepecoin123]

Did it make your car stall. Or act weird

[@kskeber]

Shouldn’t have stopped you from driving entirely.

[@jonpatch8519]

"something sharp" to let the air out. Awesome!

[@granolanbars7790]

Just tried out everything in the video, and it fixed my issue, thanks for the tip about the pressure reader letting out the air.

[@TheRocketguy13]

look in the door frame of the drivers door. their is a sticker that will tell you manufacture recommended tire pressure and sizes. all cars have it.

[@NoClanFrank]

That only applies to the original tires. All tires are different, so if you switch brands, you should check what you max is and do 10 less. More air means a little better gas mileage because of the less drag on the rubber.

[@jeffdunn6228]

Always follow the markings on your tire the door sticker is for OEM tires only

[@irvingjordan6606]

I was about to change out all the sensors on my car. Thanks dude you saved me money and taught me something. Thanks Marine hooooorah keep up the great job. Sincerely -SSG Jordan U.S. Army.

[@cwsosby]

You know what? Good info bro & keep up the good work. You’ve helped a lot of people with this video 🙂

[@Gangweezy]

when I saw the knife I was about to click off but I didn't you are the man RESPECT💪 our TPMS scanner would not work but this did FACTS

[@billbatross6856]

I also saw on another video, that the headlights & taillights will indicate which tire is next to deflate!

[@j.cooper2246]

The turn signals light up to let u know the order to check air pressure in...

[@xenthia]

""i hit the wrong one"" ""really..."" **SIGHHHH** I could not stop laughing.

[@zaqclark529]

When you let pressure out, the back of the pressure tool is actually used to remove pressure, no need for a knife, check it out, you will thank me lol

[@handsomeboy3402]

0:55 "really?"😠 And then "no no just stop"😖

[@shellypetersen9926]

so why do you let the air out if your just add some back in ? Does it reset the computer? I have a light on telling me to check my pressure will this fix it ?

[@dewman24]

If your impala does not have the button to relearn just hold the lock and unlock buttons on the car keys with the electric on until it beeps twice and gives the relearn message.

[@HailAnts]

None of the other methods worked, but this did. Thanks!

[@-MrRichBiker1967]

nice job..how much do you have to let out,like 10psi??? damn. i let out about 20psi and my tire is flat ,and the horn never went off, bad sensor, i guess!! car:2015 chevy impala limited LTZ 3.6ltr

[@Tripp31]

Will this work on 2013 impala LT ?

[@Whackloony]

Thank you for this I tried doing this myself managed to do the front two tires but when trying to do the rear it didn’t light the bulbs at the back - and when looked at the panel it had said press tick symbol to relearn the tires and it just seemed had timed out - but thank you again

[@youplaymenot]

How did you guys get into the tire relearn?

[@richardmann5049]

By luck

[@rudypaul5993]

By clicking car into right after all the tires pressure info.

[@rudypaul5993]

Second down from the top button on drivers side

[@lariianbroomfield6643]

You can also push unlock and lock buttons at the same time on your key fob while key is on in your car

[@lilpuppetthehater9347]

My car didn’t honk and I almost ran out of air . Any ideas why

[@rudypaul5993]

Question! What if I active the relearning and no horns? I only hear a clicking but no horns

[@nnyse1984]

Thanks man I really appreciate this video 💪🏿💯

[@altonlynch5464]

I hate to tell you but the back of the tire gauge is for letting the air out of the tire, don't use a knife.

[@8307c4]

He mentions as much, later in the video.

[@8307c4]

I have done this so many times and it works sometimes... After I drive for a bit one or more tires will start to "fail" on the sensor, display -- for pressure and the light comes on, sometimes one or two don't work regardless, it is random, I have no more ideas.

[@lauriemcgonigle8319]

I want to thank you for your video it helped out a lot

[@mathmadness7837]

Will it work with a lt version instead of a ls?

[@ddchows]

Only need to count to 3 one-thousand then wait 30 seconds.....

[@rekzzz14]

as what the other guy ask how did you manage to get to press check to relearn tire position?

[@richardmann5049]

knife slips .. no more air in tire.

[@8307c4]

hahaha

[@Moronesjose]

Do another video on how to install your hubcaps on right lol

[@UnavailableHandle650]

Instructions not clear, I have 4 flats and no air

[@NoClanFrank]

Thanks for the information. Mine are reverse but I will fix that tomorrow while at lunch at work. I knew you let out the air on the tires, I just didn't know the order to do it in. ;)

[@monawilliams286]

This was very helpful, thank you!

[@InvictusP37]

Mines just shows the PSI...no relearn option in my 13 LTZ

[@B_sober_w_me]

When I pressed the check my horn didn't sound.

[@rudypaul5993]

Same thing happened to my car 🤔🤔

[@Supersonicherrera8632]

My car doesn’t hank when I press check

[@TravisBon615]

The lights on your car light up to tell you which tire and secondly you only let a little air out you don't have to hold it til the air runs out

[@Guy-lk5tp]

Thank you a lot. You did a great job.

[@robertmcneely9889]

PS: YOU'RE DOING AND LEARNING. ENJOY VIDEOS

[@BFontay]

Thank you!

[@fabricioJiuJitsu]

Are u a marine?

[@brent3970]

amateur but he showed me how thanks

[@MissRailfan]

my 1 impala doesnt have that setting

[@richardmann5049]

Gravity will NOT pull the gauge out further.

[@tonyjohnson4427]

Nice bro..good lookin out

[@mobes329]

Go by the sticker on the inside driver side front door for correct tire pressure.

[@waltermartin3106]

So what I didn’t know!! Hahah

[@lewisjaygomes1617]

Wtf I didn’t get the option “ relearn tire “ I’m not surprised at all

[@thorkellofnamdalen4382]

Thanks, just had my grandmas car and mine serviced and both cars are saying service TMS.....such bullshit you pay to have something done right.

[@robertmcneely9889]

We can't see / read minu as you scroll because camera isn't in a good position. And you did menu calibration change to quickly. Slow down and hold camera so we can see what you're doing. Thanks

[@josephfiumara9065]

Nice video guys Thanks!

[@amitsudh3722]

Thanks mate

[@bbaaspencer1]

Didn’t work for me on my 2008 Impala LS. Tried 20 times! I had to buy the TPMS GM relearn tool, which is a handheld device (uses 9v battery) on eBay for $20, and hold against each tire to make it work.

[@Greenkabin]

You refuse to show 1 step or skip a step not showing how you get to the relearn program

[@g3tfvk3dmodz45]

Pretty sure five years later you figured it out but the back of that pressure gauge reader is a deflation pin it's that little knob on the back of the head are opposing side of the tire check inlet

[@edayswithdom]

You also want to look inside your car door to see what your car says the pressure should measure. The tire gives you the range, but the car tells you where it should be, yeah?

[@palmcoast26]

everything is in handbook in glove box

[@Wooptywooo]

I can’t do this because my car doesn’t t have a horn!😭

[@randyrowe3097]

You're better off going by the cars recommendation usually on the inside of the drivers door. Good job though and thanks for showing me how to reset. My used Impala didn't come with a manual.

[@jdhed1601]

I didn't watch the whole video before I posted 1st comment. ......Felt like I needed to explain c:::¿

[@_JohnDo]

thanks!

[@hersheybaybii]

thank you

[@persiangodlegend8166]

U just let out too much air

[@wolfkingcapo584]

It was nice to watch the video but once I started letting air out my car never spunded and horn honk not even once so now I am putti g air back in all the tires

[@wolfkingcapo584]

It didn't work at all. I ended up wasting time letting air out of all of my tires. And filling them back up. When I made that comment about 4 days ago I thought it was saving me time by watching the video. But once I actually tryed the method it ended up not working. 😕

[@jeffschneider5572]

[@palmcoast26]

tire pressure is inside door jab, for Chevy 30 pounds cold.....this is a bad video

[@williampickens7291]

I have a 08. Will this work

[@xKingRellx]

Can this work for a 2009 impala as well ?

[@NoviceGarage]

It should

[@williampickens7291]

Will this work with a 08