How to Change a Crossbow String | 60X Custom Bowstrings | Bow Strings

[@aidand5941]

Absolutely agree re-stringing a cam crossbow is really easy.................. That is IF you have a $400-$500 table top bow press.

[@stephenjackson8412]

Watched someone do it on KZbin with a screw driver and cocking rope.

[@38possum]

Well! I got a string from these guys and it broke dead center of the eyelet that slides onto the cam, going on had no issue. Had no issue till about shot 15 in practice when it broke. Stunning!!!! Speechless at this point, never in 20yrs of archery have I seen that.

[@yumasobkoviak9580]

Thaanks...good info...I have the right equipment which makes things easier. I have purchased replacement strings from you and always had good service and a good product.

[@kevindonahue7355]

Where is the timing marks supposed to be at on centerpoint sniper 370

[@williambutler4612]

Replacing cable and string on my TenPoint Turbo XLT it requires 5 twist (4 on bottom, 1 on top) and 15-16 twist on string. Which directions are the twist made?

[@1300SL]

Was under the impression it was a good idea to loosen off your limb retaining bolts when pressing a crossbow? Not required with this type of press?

[@elchapo-production]

Do you need to have a press tableto do this

[@bradpatsy9685]

yes you will need a press

[@gregstabryla9945]

Thanks. Had a string break on me at the end loop. Went to 60 X but none for my particular Xbow. I'm assuming archery shops around me have a press. Not all will work on a Barnett! Any reason?

[@60xcustombowstrings84]

What model do you have? We make strings for all barnetts except 1 model. Each model takes a specific string length.

[@johngraves1105]

I got a pse xb 275 how would I go about replacing the steel cables

[@60xcustombowstrings84]

I doubt you will find replacement cables anywhere. Steel cables are obsolete for the most part.

[@Porky186]

Did you check the timing???

[@tythomps]

CW to tighten on your strings, correct?

[@bradpatsy9685]

yes, cw will shorten our strings

[@tythomps]

@@bradpatsy9685 thanks 👊

[@arturoguerrero4514]

i ordered 1 for my Q 300 but the instruction said i would have to trim off some parts and bass pro shop refused to install it

[@vybzhabitz5652]

Pro tip use ratchet straps if you don’t have a press

[@sonnymichael]

What would i need to do for that to work?

[@ryanbrinks8472]

I would not do this... how will you release the strap when your done.. you would have to hope everything falls right in to place with the snap.

[@aidand5941]

No offence meant, but ratchet straps are just plane ill-suited for this application. They allow the force to be re-applied much to rapidly and with no control.

[@joshuahammond2321]

After putting new strings on do you have to resight your bow in

[@bradpatsy9685]

yes you will need to resight the crossbow

[@noyoudidnt6661]

So how do you workout what strings you need if you get a bow with no strings attached? No numbers on the bow anywhere to even say what brand it is

[@bradpatsy9685]

We would either need to know the string and cable lengths or make and model. Without either of those we wouldn't know what to build. If there are still strings on the bow you could take it to a local shop and they may be able to help.

[@noyoudidnt6661]

There was no strings at all with it and I can't find any make or model on it. I haven't removed the stock to see if there is any there. Have taken it to a few shops but everyone seems reluctant to help with it for what ever reason 🤷‍♂️

[@savannahbanna9086]

I have a bow and sting snapped but I don’t know what size it is

[@bradpatsy9685]

what is the make and model of your crossbow?

[@VV-nn5dy]

Thank you

[@TheSimba86]

all you gotta do is buy a $500 crossbow press

[@jameszulawski9910]

DON'T BOTHER REACHING OUT IF YOU HAVE A PROBLEM, "GOOD LUCK FINDING SOMEONE TO HELP YOU." was their reply

[@user-qy9rg3nt2l]

Aren't all non-essential workplaces all but shut down due to the virus outbreak?

[@jamester000]

HEY we said DON'T bother reaching out. we didn't say go cry on youtube about it. now stfu.