How to change a front ball joint VOLVO XC90 1 TUTORIAL | AUTODOC

How to change a front Ball joint / Suspension Ball Joint VOLVO XC90 1 TUTORIAL | AUTODOC
Top brands that produce Ball joint: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
On our website you will find a wide range of auto parts you are interested in: goo.gl/GOUWfB
Ball joint: goo.gl/Va88r7
Ball joint for VOLVO: goo.gl/bSiIXU
Ball joint for VOLVO XC90 1: goo.gl/UjANJ6
VOLVO Car parts: goo.gl/8hgBDH
Mobile Shop: m.autodoc.co.uk
► VOLVO XC90 car repair tutorial - • VOLVO XC90 car repair ...
► How to replace engine air filter on VOLVO XC90 1 - • How to change Air Filt...
► How to replace rear brake discs and rear brake pads on VOLVO XC90 1 - • How to change rear bra...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZbin: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...

[@chrisbotham5331]

These comments are hilarious, the video gives you an idea of what’s involved so any competent person has a bit of a heads up before doing the job, if you want to watch a 2 hour video look elsewhere but I like these videos sure some parts are glossed over but this is all I need to tackle the job 👍🏼

[@autodocuk]

Thanks for your positive comment! Stay with us! AUTODOC

[@JAMESJJEFFERS]

5:14 there is space between the resting plate of the joint and the knuckle.... 5:26 magically the joint is mated with the knuckle..LoL...

[@texasRoofDoctor]

Great video. This guy is so calm, no curses or thrown wrenches. He finally did get his orange gloves dirty though.

[@autodocuk]

We are glad that you enjoy our work! We wish you a Merry Christmas and a Happy New Year! AUTODOC

[@senorpimps4678]

I can assure you it’s not that easy I had a guy replace my ball joints and control arms over the weekend and when the control arm bolt good stock you’re gonna have to cut it out he had a $1200 snap on Impact wrench and I didn’t budget they don’t come out easy they come out easier than going in but this is going to be like a newer ball joint replacement to make the video look great

[@tykendrick800]

When it takes you 8 hrs to do what he did in minutes

[@autodocuk]

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@scotts9961]

Nice clean vehicle, artificial looking video - repairs on a car that's old enough to need repairs would be more realistic..... Could do without the music also...

[@doriwebb2515]

MUTE

[@Peppermint1]

In most cases you will have to detach the strut from the spindle, and take the spindle out to remove the bj. Lots of punching. And that's if the bj comes out easily from the lca - may need abj separator.

[@autodocuk]

Thank you for your feedback! You are absolutely right - each car requires particular replacement and everything depends on a technical condition of car parts units. To dismantle the ball joint, it is better to use a specific tool for removing it, as the cone sometimes gets sour and to remove it will be very uneasy. Best wishes, Autodoc.

[@lev1g]

Why do you think his cool procedure of exchanging right away the old and the new BJ on the stud is a bad one?

[@Albatr0ss222]

That would never come apart like that here in the rust belt, lol, the whole sanitary mechanic thing is cute though.

[@autodocuk]

Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, without going into all the technical nuances. Best regards, Autodoc.

[@RandallFlaggNY]

So easy to work on newer C-L-E-A-N cars...

[@reallyhappenings5597]

So fake. There are some magical edits jumping over the most difficult moments of the job, in which the proper (special) tools were most likely used off camera. Almost looks like he's pantomiming at times. Why do this? Note the difference between 5:14 and 5:26, where suddenly the ball joint is fully seated in the knuckle. This video is not that helpful because it doesn't honestly represent what it takes to either remove or install the ball joint.

[@autodocuk]

Thank you for the feedback! Your opinion and remarks are very important for us. Stay tuned and follow our latest updates. Best regards, Autodoc

[@juanlazaro6107]

tanks for the video was help for me :)

[@autodocuk]

Thank you for the feedback! We are glad you find our video interesting and informative. Stay tuned. Best regards, Autodoc.

[@TheDryLife]

Did he use the Volvo Tool for installing the ball joints

[@autodocuk]

Thank you for the feedback! No, he used another professional tool permissible for servicing Volvo cars. Best Regards, Autodoc.

[@riley633]

Wait! Did he just tapped the ball joint to align the holes? I thought there are gears on that? The ball joint was not seated yet and he just tightened the bolts to get it seated. Is that ok?

[@martinparker6536]

@@riley633 no splines/gears on these but they are a slight press fit

[@terryt3708]

How is it that you get the ball joint to go back in so easily? I need answers

[@autodocuk]

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@asmusubermensch5889]

You don't, this is nonsense!

[@AP-ph7hf]

I just did this job yesterday. It is not easy at all. This video is very misleading.

[@autodocuk]

Thank you for your comment. Please clarify what exactly you didn't like in our tutorials and we will sort this. Your opinion is very important for us. AUTODOC

[@Ubon94]

How can you tell if a ball joint is bad. Can you tell while driving?

[@autodocuk]

Thank you for the feedback! The ball joint has a certain stiffness, when it disappears and there is a backlash it shows that the part is worn out and requires replacement. Best Regards, Autodoc

[@s1ssysunsh1ne]

thank you

[@autodocuk]

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc

[@gerryr5729]

They left out the hardest part!!! Pressing the ball joint in required taking the spindle off and hammering the crap out of it!!!!! Total thumbs down

[@autodocuk]

Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, so some stages of the repairs might have been excluded. Best regards, Autodoc.

[@martinparker6536]

i couldnt get mine out, ther was NO lip provided for knocking it down n out and lack of access elsewhere, i had smack a chisel into the soft ally above it near the bolt hole then it fucked the bolt hole up, had to file it all level and retap it ......even then it cross threaded when trying to fit it ......GRRRRRR !!

[@h123305033]

OKOKOK

[@juanlazaro6107]

lol oviusly the video was made for show the job easy and fast cause time i change the ball join in a 04 and yes was harder and dirty asfk marketing is for viw and this video is marketing if the ball join is bad this will show movement in the end of the nut i means if you tried to install and still give u turns and turns thas a bad ball join

[@autodocuk]

Thank you for your feedback! Unfortunately, the complexity of the replacement is individual for each car. It depends on a technical condition of the main details.Our videos are informative in the replacement sequence. Best regards, Autodoc.

[@bladedspokes]

This is not at all how a ball joint job really goes on an XC90. And, who uses air tools without proper eyewear?

[@autodocuk]

Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, without going into all the technical nuances. Best regards, Autodoc.

[@FGX318]

Me !

[@asmusubermensch5889]

Me too! I just close my eyes. LOL @@FGX318

[@heimdallgsd]

Not the proper way to do the job

[@autodocuk]

Thank you for your feedback! Please, re-phrase or clarify your question. Best regards, Autodoc.

[@reallyhappenings5597]

so sterile lol

[@railman6868]

lol.....no use of a torque wrench on all bolts to tighten or any copper grease applied on threads. I somehow can't trust this actor to work on my Volvo.

[@autodocuk]

Thank you for your feedback! We make our videos to give people the basic idea on some of the details in the whole procedure. That is why some parts of any tutorial can differ for obvious reasons. Best regards, Autodoc!

[@paalnic123]

LOL!!! Thumbs down

[@autodocuk]

Thank you for watching our videos! We make our videos based on recommendations we get from people who need them. We will be very grateful if you share your preferences