How to change a PIR on your Alarm System

How to replace a movement detector on your security alarm system, if your system is five years or older , replacing the sensors can improve the operation of your alarm system and reduce false alarms.

[@RobertBristow-zg4rx]

Very useful video - invaluable tips and help for me, the tip to save the EOL resistors and install in the replacement device helped me no end, and cured a problem. Many thanks.

[@andlep]

Thank you for your tutorial. Gave me the confidence to successfully upgrade a faulty sensor.

[@pjmnica]

This vid helped me learn how to take the sensor off during the renovation. Thanks for the help.

[@MrLibbyloulou]

my system is 24 yrs old, last yr needed a new bell box..last week, the mice eaten through 2 cable in one week causing me unbelievable annoyance as i couldn't believe it was animals that caused my system to go down......good vid by the way....

[@emadwahhab2573]

Champion thanks!

[@abureehan486]

Very very nice. THANKS sir.

[@gervanooijen1417]

Nice tutorial, only de Airco is standing in the way. A part of the detection field is a blindspot

[@mdegiadegz101]

Replaced a sensor but zone light is now always on. Sensor works fine but wont trip alarm when activated.

[@chriskeenan1]

No tamper loop? Interesting!

[@jacktheninja]

How many Volt Is the T and NC

[@ayazayaz2682]

What batteries are used in Motion Detector 5890PIR Honeywell ? Cannot find the Battery, No marking on a Motion detector, no mention in available instructions. If anybody can help.

[@hurleymatthew44]

Hi there like your video just wonder if u have a video on hooking up the Motion detectors to the alarm box what wires go where

[@TechnoworxStore]

No not at the moment, will look at doing one sometime in the future

[@ArgaTheRexouium]

I have a huge collection of PIRs on my channel

[@jasonsmith9467]

dude you need to add keywords to these videos get them out their for all to see as well as get paid from youtube for great video content.. you just need to change the word {'''' HOW'''''} 2 {''''THE BEST WAY'''' } your views will explode as well as help others works for every one. cheers mate

[@alarmfannh]

Having a motion looking at an AC unit is NOT recommended.

[@samham9426]

Do you have to program the replacement sensor into the alarm system or will it just work

[@Zfurty]

It will work without programibg

[@deevooneh5638]

if you want to damage your system do it the way he did it

[@vinodgangwani2518]

how to stop false alarms by pir

[@TechnoworxStore]

+Vinod Gangwani depends on what is causing the false alarms. if there is nothing in the environment contributing to the false alarms ie. windows being left open/fan running causing curtains/blinds to blow around, insects or Ghekos crawling over the lens, it is quite possible the PIR may be faulty. it is good to rule out all possibilities prior to replacing.

[@saminadan7300]

Hi, l am interested in Nx 4 system,,,l m an installer but not familiar with hills Nx 4,, can U provide me with simple programming of the system

[@Zfurty]

There is a video on this channel programming hills alarm

[@AlexEatonPDPIGaming]

All that about false alarms and stuff after 5 years is all bull shit