How to change a tire

Changing a tire on a Terex forklift 14.00-24
Amazon page
www.amazon.com/shop/tripleati...
Tools used
Gaither 20 Ton Jack
amzn.to/2KfUI1L
Esco Bead Breaker
amzn.to/2XBUKti
Dismount & Mount Bar
amzn.to/2KpGSZl
Vise Grip
amzn.to/30r1y9V
Quick Air (female air fitting)
amzn.to/2XL1Dsi
Waterfill Adapter
amzn.to/2LOjyaa
Prevost Air Coupler
amzn.to/3586qDV

[@SidekickZero]

Really enjoyed your videos. Hope all is well my friend. Been watching for years and just hope you're doing well in life!!!

[@JonRheaume2282]

On higher ply tires you can also use the bead breaker to push in the tire to the drop center on the bottom as you insert the bars to the top and start dismounting. Use your 2 bars at the top as normal. but don't pull one out. It's just a struggle to pull 1 out. just get another bar. Make your job easier.

[@worthless4382]

Never thought about using the bead breaker to make that thick ass side wall drop down by the drop center that’s smart

[@travisjackson4331]

You most definitely need to make more videos bro I just love your videos I have learned so much from you it is not even funny thank you for putting these kind of videos out

[@ReubenIthlall]

Love your videos bro,I have the exact same job here in South Africa

[@thebackwoodsmechanic5029]

You can tell you've done this a while. I do some mobile mechanic repairs and commercial equiptment but I dont have the opportunity to work on this type of equiptment . Good video dude

[@JonRheaume2282]

Quick tip. Sometimes the bead breaker won't go in. Or it goes in so little it's in jeopardy of flying out. Put 2 short 1' spoons in the bead. 8" apart to make a gap to accept the tool.

[@borisparrill]

Awesome video as usual and thanks a lot

[@jjaguiniga]

Máster!! Simplemente numero uno!

[@gabrielmanaila]

Hi,all the best from ROMANIA. Waiting next video. You are my teacher. Hope that in March i will open my bussines, same like yours.

[@00nutt]

Changed that tire like a boss. When I was younger on the farm we had a combine tire that had to be replaced. I was told to help the tire man. Asked what I could do to help. He replied stand right over there. To this day I have much respect for y'all. That man handled that big tire like it was nothing!!! Difference was he knew how to let the weight do the work for him unlike me!!! Lessen learned!!!

[@TripleATireService]

So funny thats what I tell the customers. Stand right over there or yes you can help would you like to hold an umbrella for me because it’s hot

[@user-dm1po8wi9h]

日本の同業者です。 動画のアップを楽しみにしています♪

[@SuperTone35]

Good job👍

[@joecoronado3784]

Love your videos bro I’m from San Antonio tx I work southern tire mart

[@TripleATireService]

Thanks

[@garrettglasgow2301]

Southern Tire Mart Store #160 FP. Represent. 🤘🤘

[@Vipox92]

Respect man from a fellow tyre fitter

[@laynejohnson4289]

Can you do another service truck tour I’m sure you have changed it up within the last 3 years 👍🏻

[@gabrielamejiasolis1178]

Buen video amigo te deceo mucho exito

[@TripleATireService]

Gracias

[@laynejohnson4289]

4 months later and we are still all waiting for the next video ⌛️🤛🏻

[@jceletroeletronica]

Muito bom mesmo. Esse testalonador e muito bom. Hoje naõ mexo mais com peneu de trator. So com linha leve

[@jaredlandis8159]

What bead breaker are you using and do you recommend?

[@PowersPlays97]

Great video 👍 you make it look ez. I plan on starting my own business, any tips on how to get up and going?

[@TripleATireService]

Don’t over think any of it Just do it!

[@rodneyheathingtonjr8529]

Why kind oil do you use for your bead breaker?

[@masontyler479]

Badass i got a 1400-24 waiting on me tomorrow first time

[@DynasDaily]

Bring a blaster!

[@masontyler479]

@@DynasDaily oh i plan on it lol i figured id need that, my strap, and half a tub of murpheys to pack around the rim. Saw the tire friday before i clocked out and the beads really close together. Oh well though i finnaly get to start OTR stuff so im not gonna complain lol

[@DynasDaily]

@@masontyler479 There's a lot to learn!! But you'll love it and get real good at it eventually. Watching experienced people do it, doing research, etc. is the best way to start. Kudos to you for picking up a very skill demanding trade. Be safe and good luck!!

[@masontyler479]

@@DynasDaily thank you sir!

[@TripleATireService]

With a bead to bead tire I always start with the strap then I may lower the machine to let the tire come out of the drop center then hit it with the blaster if needed. Soap is the last draw for me I just hate the mess. Good luck to you! kzbin.info/www/bejne/g3SvomWko5J6fNk

[@garrettglasgow2301]

Keep them coming man!! Love your techniques. We change tires differently but I always try to keep in mind your methods on service calls cause you never know what you'll run into. Question? That tube was full of water? Can you elaborate on why? Just curious.

[@TripleATireService]

Thanks! The tire is supposed to be tubeless but someone previously installed a tube. Water was added for traction and stability

[@garrettglasgow2301]

@@TripleATireService Thank you.

[@jermaineale7289]

Somebody get this man a COLD BEER! I would've took it off and take back to shop, Straight on the machine lol. In this case, you're the MACHINE!

[@travisjackson4331]

And how long have you been in the industry and do you run your own business or do you work for a tire company

[@johncollings6799]

Hey you're in Florida??

[@laynejohnson4289]

Still waiting on videos 👍🏻😎

[@hard2getitrightagain314]

Like ballet except ....USEFUL!

[@user-nv9gl5cy1y]

А какой у тебя компрессор ? И качает ли он 16 атмосфер ?

[@themotorcycleguy5980]

do you get most of your tools off amazon? wheres the cheapest place?

[@mattallin3553]

Don't buy cheapest stuff...you will regret it when that tool fails and your in the middle of no where

[@user-md3qf2no9q]

👍👍👍👍👍👍

[@felipelara448]

I hate doing these 14.00r24 I'm from San Antonio n work for a small company but u make it seem too easy

[@TripleATireService]

I wish all were this easy lol

[@bustanutonya]

@@TripleATireService I was going to say that tires soft...some tires like solideal are way stiffer especially in the winter...in that case I’ll take the rim off lay it on the ground and pry the rim into the tire.

[@matthewlabrecque876]

i'd like to see this guy do it here in Canada when it's -25 and that soft bias ply tire is frozen and you have no traction because your on a sheet of ice. your good bro but you are also in near perfect weather and working conditions. not hating just stating the challenges.

[@IndioBlanco5]

how much do you charge bro?

[@956exterminator8]

How much do you charge

[@felixlaralopez7257]

Buenas Noches Amigo. Cómo se llaman tus espátulas? 👌👌👍👍

[@TripleATireService]

www.amazon.com/shop/tripleatireservice

[@chrisp8418]

Hey man, looked for your email but could not find. I am in need of GOOD valve stems for my skid loader. I want to go brass. TR618A or TR501? The 501 looks shorter, but the thickness of the rubber seal looks a lot thicker than the rim, 618 is longer but rubber looks to be the right thickness of rim? Which way should I go? Hopefully this finds you. Thank you.

[@laynejohnson4289]

I’d say TR618A I use those on all farm industrial agriculture equipment if I can they are best beacuse it’s 2 piece the insert comes out and you put your big quick air once the bead seats unscrew quick air screw in insert no fumbling of Losing the valve core but more air flow is key 👍🏻

[@luisduarte6519]

En donde haces los road services?

[@TripleATireService]

Florida

[@claudiomoraes7514]

👍👍👊🇧🇷🇧🇷

[@youssefhassane487]

I want to work with you

[@reyjimenez9203]

Dónde estás cubano

[@HughzieTube]

Are you a fan of fluid filled tyres? You'd end up in a right mess if that was on the dirt while removing.

[@TripleATireService]

Not really but it’s part of the job

[@theserialentrepreneur3071]

I’m in the process of becoming a certified tire technician. Do you have an email? I’m looking for a mentor.

[@themotorcycleguy5980]

Whats your email?

[@TripleATireService]

[e-mail]

[@fatkorn]

You disappeared again

[@youssefhassane487]

I want to work with you