How to Change Cadillac ATS 2013 o2 Oxygen Sensor

[@chriswalsh4785]

Dude well done well detailed, if somebody can't change the o2 sensor after seeing this video then they are incompetent, well done very well described, it's the first video that comes up when you search, now I know why it's:#1 💪

[@duanecarr6712]

About to do this so I like hearing that

[@duanecarr6712]

Excellent presentation good pace verbage and explanation. Outstanding

[@GabbaGabbaRob]

Hey, which way do you turn it to disconnect or take off from the screw in side? The turbo i believe is what its connected to.... Correct me if i am wrong! 😊

[@mizzbell100]

Thank you so much

[@kenyama5219]

How did you unplug the connector? As you said it’s really hard and doesn’t move at all. Was trying to find a thing that can be flex and pinched.

[@canonmikho2370]

The connection for the o2 sensor itself? There should be a prong on the connector, kind of like a safety clip. You have to lift that safety clip, which allows you to pull out the connector

[@kenyama5219]

@@canonmikho2370 Thanks for the reply :) I know you explain the safety clip. I moved to “up” position. My question was after you unlocked it how did you pull them apart because to me it is almost impossible to pull them with 4 fingers especially at such location. I was wondering if you used any tools to grab those two connectors or something.

[@ceez3317]

@@kenyama5219 did you figure it out? I got a 2014 and I can’t remove the clip at all even with the safety clip up

[@kenyama5219]

Yea I did. It’s while ago and can’t explain exactly but if you jiggle the right tab it comes off pretty smooth without requiring so much effort, so try to push/pull tabs :)

[@FirePackMack]

@@kenyama5219did any of y’all figure out how to remove it? I don’t think “jiggle” was the right word cause I’m jiggling it and not much is moving

[@JWP6948]

That guy needs a bic -Big Black 😂 for real tho thanks for the video bro! Gonna do mine tmrw after work

[@canonmikho2370]

Lmao! Thanks brotha! Good luck!

[@Mames5537]

Crazy same setup as a malibu premier but engine is sideways.

[@chanerikajohnson4684]

hey what would you do if the new sensor will not fit. like the ridges

[@canonmikho2370]

Check the sensor. Any broken/bulging/uneven grooves?

[@paulcarlino744]

I bought my upstream o2 from them and I had to change the connector from the old one and put it on the new sensor

[@addisondiaz]

I just did mine today but the down stream one for my ‘06 DTS

[@duanecarr6712]

Thank you brother

[@addisondiaz]

My question is do you have to rest it the codes or should the check engine lights turn off automatically because unfortunately for mine it’s still on

[@canonmikho2370]

You can reset them yourself. If it's still on, it can sometimes take up to a few miles for it to turn off.

[@MandosChannel]

Would this tutorial work for a 2014 ATS???

[@canonmikho2370]

It should, yes. 2.0T

[@spotonsounds6486]

Have you replaced the downstream sensors??

[@anthonycarranza8342]

U happen to know the part number?

[@n-vanb8908]

was it ever p2097? Mine switches between p0171 and p2097.

[@illmavic247]

Have you found a solution for your codes?I have 2104 with the same code errors.wondering if replacing the o2 sensor will do the trick

[@n-vanb8908]

@@illmavic247 no, it was a real pain. Nobody could figure it out. Eventually I found a small gas leak past the injectors. I began driving it insanely smoothly without pulsating the gas pedal. This did the trick.

[@n-vanb8908]

@@illmavic247 oh and check the Pcv valve on top of the engine. If there is a leak, it’ll trigger p0171. P2097 was due to by driving habits and cleared when I drove steadily on the gas

[@ML-fb4qe]

I have these very same codes always popping up it’s been a real nightmare.

[@didymus4]

not sure it will work but thank you

[@ناصرالشمري-ب9ب]

Its sensor number 2 or 1

[@StyleByHector]

What was the code it gave you?

[@thearrow5793]

I think it’s P0171....

[@anthonycarranza8342]

Is there only 1 o2 sensor?

[@derickharden2761]

Called threads dufus

[@thearrow5793]

Sorry man I know it’s too late to respond but you have cracked with the intake hose going to pcv it’s very clear it’s not the O2 sensor that’s causing the problem...

[@canonmikho2370]

Haha it was the o2 sensor. I replaced the hose after I recorded this video (I was waiting for it to come in from RockAuto!) I had the issue before the hose cracked

[@andrewgonzalez80]

My car was doing the same it is the 02 sensor

[@thearrow5793]

@@andrewgonzalez80 also I have same code and I change the hose then problem solved......

[@jefferyneitzke2474]

I changed my hose and still have the p0171 code.

[@sleepyvibes3244]

If it's so hot outside, why are you wearing a sweater? Should I be wearing a sweater while attempting this?

[@Goldenboy48]

Did you change bank 1 or bank 2?

[@dgessence]

So is there only one o2 sensor on ats?