How to change Corsa D heater resistor!

[@stevet1963]

Can be a nightmare job but you overcame the problem socket Well done fella 👍🏻👍🏻

[@HadgarageUK]

Thank you!

[@LIES666]

This was such a ballache to squeeze into position to even start fixing the problem. Kept putting it off even when I had all the parts. Glad I have all the fan settings again finally.

[@hellofromtheuk3642]

Thank you so much for post this. I've fixed my daughters corsa which had exactly this problem. A 7/32 inch socket will fit that nut. The new one came with a 7mm nut. Thanks again.

[@rabgabro6595]

Finally after lot of fidgeting. Its fixed. Thank you

[@kaiserslauternslayer]

Thank you. You did did the hard work to make my. Life easier 😊

[@roelofv3995]

Great video. Saved me a trip to the garage. Thanks mate

[@safdarkhan33]

Thanks very helpful video

[@ravey1981]

Thanks for this. It is indeed a 5.5mm. luckily I had one. Still a fiddly job getting the resistor out....

[@differentdrummer6162]

Great video - I have to do the same job. Can you recommend a brand of resistor please, such as Topran, Febi etc? I think they all have that lug in the wrong place...

[@jamesy1955]

7/32 inch socket fits best on the little bolt/screw. 🤗🤗

[@zokxso1627]

5.5mm too

[@micchaelfearn5163]

Can you please tell me where the earth wire is for the heated rear screen on vauxhall corsa D 2008, ??

[@michaelbwwfc]

Could it be the same issue if my window blowers don't work

[@shawnfernandes891]

Sorry but I am confused to where you opened the bit to access the heat resisters, cause I though you need to open up the radio using release keys?

[@HadgarageUK]

Hello 👋 It's behind the glove box.

[@ewangrant3899]

So I tried this this did everything you did but still stuck on number 4 and 123 still not working any advice?

[@masoncotton6904]

Might be an electric problem unfortunately

[@ewangrant3899]

Ye I’m not sure what it is but basically in the footwell of the passenger side there like a black thing that almost holds the vacuum hold of it in and it had basically come out

[@MyMooseman]

My blower has started to make a noise on 1, and 2 settings, seems to blow hardest rubbish at clearing the windscreen.

[@mikexc90]

Your wring was also clearly burned out which is as common also, really needed to change the plug too

[@chris-12500]

Changed mine but made no difference, still only works on setting 4. Any ideas??

[@IeuanBevan.]

Get hammer.........use hammer.....problem fixed 👁👄👁

[@kevslife]

Get a dremmel tool and cut a notch or slot in the top of that 5.5mm bolt head. Then you can use a screwdriver the next time you need to replace it.

[@alysiawilliams8005]

Did you file both sides off or just one

[@HadgarageUK]

Just the one that does not match the hole.

[@anthonyatkinson2950]

Where is the location of the resistor / wiring please?

[@aleksandardimitrov2590]

Good job

[@kevinanderson258]

Do you need to take glove box out

[@chazwalker7156]

@@kevinanderson258 No, but it does help, as you probably now know 👍

[@ciprianion4142]

That is a 5.5 …I struggled to get that screwe off as well

[@GoggyTwackGaming]

do you need to disconnect battery

[@HadgarageUK]

I didn't disconnect the battery

[@jamesy1955]

HadgarageUK Nor did I. 🤗🤗

[@chazwalker7156]

@@jamesy1955 Me neither

[@Malleabile]

Where did you buy?

[@SaBatheone]

Amazon

[@bootsmclaughlin1438]

What do you think the problem would be if its not workin on 1.2.3 or 4. Some times it works and sometimes not....Anyone plzzz

[@alan1607uk]

Mines doing the same, Give the underside of the glovebox a whack and it might start again (for a few weeks) - there is a video on youtube of someone doing this and worked for me.

[@bootsmclaughlin1438]

@@alan1607uk had to change the blower motor £75 stuck it in meself jobs a goodin. I hit it a few slaps but no joy. Apparently it's a common fault on them Vauxhalls... thanks for your reply

[@mohammedkayani8302]

@@alan1607uk i jus did this and it started working on 3/4 ..

[@bootsmclaughlin1438]

@alan1607uk better to just change it for a new motor get it done rite... save you knocking the f out of your poor car lol

[@alan1607uk]

@boots McLaughlin I agree, but a useful short term solution until you have the part

[@stefanutzzustf7244]

Romină

[@grahamstraw8533]

Not 1 of mine works any ideas

[@lawrencehenson8409]

An absolute stupid idea for locating the unit, all it needs is that one bolt & possibly to slide fit the unit, but not those stupid flaps you have to press simultaneously, what moron thought that up. BTW the bolt size isn't 5 or 6mm although the latter is a loose fit & will do the job, it's actually 7/32nds of an inch, this probably because Vauxhall is, or was part of America's General Motors (GM) and as such the company used imperial (AF) fixings