🇬🇧 Vauxhall Corsa D Heater Blower only works on 4 (Maximum) How To Repair

If your ventilation blower only works on max, this video shows how to repair the fault.
The motor resistor will be faulty, here I show how to change the damaged part.
This fault is very common on many different vehicles.
Amazon Link to buy new Heater Resistor, £9.99, amzn.to/3J3r5z0
1/4 Socket set £22 amzn.to/3868RI1
5mm.Screwdriver £6 amzn.to/33S2Wa4
Heater resistor and new connector plug £13 amzn.to/37tYVKp

[@JM-rm3lt]

Mine just needed pushing in. Many thanks mate, really helped me out when I don’t have much money.

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@kyleellis7421]

Mine just needed pushing in a bit as well! Thanks for the video

[@user-mb3cm6yz4j]

Absolutely spot on. To the point, no fluff and accurate - just what I needed and saved me from trying to access the back of the switch. Many thanks Jon

[@aaanton11]

You're very welcome Thanks for the great comments👍🏻👍🏻🛠

[@compaq416]

Video spot on, a big thank you for taking the time to do a first class job

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@glenthompson4625]

Thanks for video. Got resistor off Internet for 12 quid including P&p and managed to fit myself. Only fiddly bit was getting the screw in and out. Now the heater works as normal. Saved me quite a bit of money as garages quoted between £50-£80 to replace it. If you have the same problem with your Corsa, I would recommend you follow this video and try do it yourself. If I can do it, anyone can.

[@aaanton11]

Thanks Glen for the great comments👍🏻👍🏻🛠

[@ianrobertson9968]

Thanks for this, very helpful,my daughters Corsa D had the same problem,removed the resistor and one of the pins was corroded slightly,cleaned it up and it worked fine again.

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@hughoverend]

Thanks bud - thanks to this video got my first ever car repair done myself! Really clear instructions.

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@ElhadjiAboutKDiouf]

I need your prompt reply asap now!

[@glenns7139]

Had the same issue. Ordered a new one off amazon along with a 5.5mm socket. 5 min job all good. Thanks alot for the heads up. The only issue i had is that one of theblocating lugs was off so had to carefully grind it off. Popped in a treat.

[@aaanton11]

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

[@truebelief8870]

Thank you Anton! The video was spot on mate! Very clear, short and precise 👍 I've managed to replace the heat resistor and heaters are working perfectly fine.. Muchly appreciated!

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@ethanmiller8457]

thanks very useful information - just happend on mine wondering if this is common fault on corsas. never heard of it happening on other cars. thanks for posting

[@aaanton11]

It’s a common fault on all cars that use these resistors, thanks for the great comments 👍🏻👍🏻🛠

[@brendandeeds1020]

Great video. Unfortunately this was a long job for me due to various problems with the connector plug but I eventually got it solved. Without this video I wouldn’t even know where to start. Big thanks!!!

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@drewsmith6066]

Cheers chap just fixed mine after watching this ...i pulled the plug out and pushed it back in and it now works spot on... ..thanks again ill remember this fix

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@keithsmith6932]

Perfect. My wifes new car is a 1.2 litre Energy. Has just this problem and now I know exactly how to fix it, Most certainly deserves a like and subscription.

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@keithsmith6932]

@@aaanton11 welcome sir

[@Stefano_Marzaroli]

Hi Anton, I really congratulate you for the clarity with which you explained everything....in particular, the technique with which you extracted the resistor from its housing...really GOLD advises for me as I'm just a neophyte! !! Thanks again

[@aaanton11]

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

[@1966ianmiller]

Thank you so very much, no more freezing cold hands for me now, well done, your video was very clear and the unit was so simple to swap.

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@saimwarriach9291]

My heater is not working properly so what should i do .

[@simondavey2632]

Perfect. I have just sorted my father in laws heater using your video, thanks. FYI, his bolt was slightly bigger than 5mm so used my pals 7/32 spanner and all sorted, so thanks very much for posting.

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@tomcabot5753]

Yes - what KZbin tutorials should be like! But can confirm Simon Davey's experience. I just swapped out on a 2012 Corsa SE 1.4 and it had 5.5mm nut (although replacement-part bolt/screw was 5mm) ... initial frustration followed by some relief on finding a 5.5mm socket knocking around the house ... @@aaanton11

[@staceylee8727]

Thanks so much! Managed to contortionist myself into the footwell and do it, blower now works. So chuffed 💃🏻

[@aaanton11]

Well done, Thanks for the great comments👍🏻👍🏻🛠

[@kissrobert7599]

Thank you very much for this tutorial, it helped me soo much. I recommand this video to everyone who has this problem, thanks again!!! Liked subscribed.

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@julianwhitehead2433]

@@aaanton11 cheers, I'll order the part and give it a go.

[@bertiesworld]

Good video but when replacing it do bear in mind the mileage the vehicle might have done. I'm at 150K and I'd already replaced the resister bank quite some time ago and when the fan would only run on 4, thought I know exactly what it is (had the same on a Citroen). Swapped it out but while driving the 5 miles into town, I started to get a nice burning smell into the car. I switched the fan off! I have just taken out the fan and it runs reasonably well on pos. 4 but doesn't turn at all on pos. 1 and not much better on 2. And spinning the fan I'm lucky to get one revolution. Bearings are shot. So yes, you might get away with replacing these resisters (its an easy fix) but it isn't always the problem. Btw compared to the Citroen replacing it on the Corsa is a walk in the park.

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@bencarruk]

Brought the new part from Amazon. Unplugged the old one. Realised I don't have the right tool to remove the old one. Plugged back into the old one. It's now all working again 🤣 I've wasted £9.99. Great video though keep up the good work.

[@aaanton11]

The connector plug will be melted pull it off and check it again you might need to replace the plug there is also a link for that in the description Thanks for the great comments👍🏻👍🏻🛠

[@bencarruk]

@@aaanton11 thanks I'll see how it works next time I'm in the car.

[@muhammadadil7076]

My car heater was only working on 4 . After i changed the resister it works on all now . Thanks for upload it really helped and saved my some dosh.

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@SteveSullivan-kr9so]

Great video, took me an hour to find a socket to fit and get my massive body in the footwell. 5 mins to change

[@aaanton11]

😂 Thanks for the great comments👍🏻👍🏻🛠

[@adriancannon4401]

Daughter very happy now fan fixed on her car. Great tip about clips and how to get resistor out. Thank you

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@paulnewman9275]

Great - many thanks, my daughter and her Corsa D thank you for saving her from the "Max or nothing" syndrome :)

[@aaanton11]

Glad it helped!, Thanks Paul for the great comments👍🏻👍🏻🛠

[@thomasrpoulsen]

If you have a left-hand drive car (i.e. Opel) then the resistance must be pushed to the right when you take it out. It's a really good video. The bolt that holds the resistor is actually a 5.5 mm, completely idiotic, but I got it out with a spanner and a pair of pliers as I only have keys in whole mm. Thanks for the video mate.

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@jordankiroski9431]

Hey is the connector under the steering wheel or the glove box on the left-hand drive opels?

[@mikefranky]

My corsa van heater played up this morning only speed 4 working! A big Thankyou for the video as this is my job this week saves me booking it into a garage Cheers fella

[@aaanton11]

Thanks for the great 👍🏻👍🏻🛠

[@Stilly94]

Great video! Just followed this and my blowers are working perfect! Wish I had seen this video a year and a half ago when they first stopped working properly!

[@aaanton11]

Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

[@Stilly94]

@@aaanton11 so it has worked perfectly for the last 3 days and now it’s completely shut off again 😅. Any ideas?

[@AstonColey]

Great video and my Vauxhall Corsa van has the problem. I will be following your instructions and and will let you know if I am successful. Cheers

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@AstonColey]

It worked a treat and I now have a fully functioning fan. Cause was a dirty connector pin with verdigris on it. Measured resistance taps all good measured thermal fuse and that was 0 ohms. Cleaned pin and rubbed vasseline on the pins- reassembled tested okay. Thank you so much!!

[@antalz]

Thanks a lot mate, especially the clear footage in such a nightmare of a spot to work in was very helpful. Cheers!

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@heavymetal3rocks]

Thanks for this. I will try changing it myself once the part gets delivered.

[@aaanton11]

No problem 👍 Thanks for the great comments👍🏻👍🏻🛠

[@paulpickup6935]

thanks saved me a few bob on garage fees. part cost £5.49 on ebay . the tip about the two awkward plastic tangs (not mentioned in Haynes Corsa D manual) was useful in removing/refitting

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@wicklapaul69]

Good video, straight to the point and no rabbiting on for 10 minutes,

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@malcolmdawson4494]

Great video,this has saved me £50.00 at the garage,many many thanks top job....

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@ak-fz3vy]

Thanks - very clear. its the third one thats failed over about 8 years - so looks like a common fault

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@shadyash1978]

Excellent. Top man, I was scared that I would probably have to replace the fan.

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@dinodino5760]

Best video.BEFORE REMOVING THE PART TRY TO SHAKE IT- contact might be the issue as the part is located at the passenger feet

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@rickerd83]

Thanks!! seems like my plug just had some dirt in it. I removed it, blew the connector out with some compressed air and works perfectly now!

[@aaanton11]

Nice work! Thanks for the great comments👍🏻👍🏻🛠

[@dyathi8598]

Thanks for the good explanation. I managed to fix it. it was explained very factually and easily. nice greetings from Germany 👍👍

[@aaanton11]

Glad it helped!, Thanks for the great comments👍🏻👍🏻🛠

[@jhewitthunt]

Exactly what I needed, and brilliantly explained. Thanks very much!

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@kikabih]

Thanks so much for the video, currently have the same probem only works on 4

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@tongaib]

thanks pal, managed to replace my heat resistor today.👍

[@aaanton11]

Well done, Thanks for the great comments👍🏻👍🏻🛠

[@solroche7238]

Top man Anton, video was spot on 👍🏻

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@jimmccabe5760]

Great advice on replacement done and dusted 10 mins tks

[@aaanton11]

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

[@gunsdonovan9183]

Watched this video, done the job in 10 minutes, (im 6' 2'') note to self take the seat out first next time, thank you aaanton11, thank you very much, love my corsa again !!!!

[@aaanton11]

Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

[@kevlewis6279]

Managed it in about 10 mins. Hope it lasts a bit like. Excellent video mate.

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@JFAR49ER]

I had same problem and when I unplugged and plugged the wiring into the resistor it sorted itself. Just to say try that first before full resistor replacement

[@aaanton11]

Your connector plug will be melting, have a look at the pins, link to new one ion the video description, Thanks for the great comments👍🏻👍🏻🛠

[@jod125]

This was very helpful. I managed to change it myself. Thanks so much for the video!

[@aaanton11]

Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

[@Chalavundiinka]

I have the same issue thanks for the video mate reallly appreciate it

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@MatchboxGarage]

Thanks again mate. Unfortunately for me this is the second time referring to this video as the previous resistor didn't last long

[@aaanton11]

You will either need a new connection plug or a new motor the plug is the more common one links are in the description Thanks for the great comments👍🏻👍🏻🛠

[@mindbodysoulmeditationmusi3557]

Love your video my friend. I just changed mine following your tutorial. Wonderful video; very informative helpful!!

[@aaanton11]

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

[@connorl7012]

Great video, i actually did not know where the resistor was until this video so i just banged mine for the meantime with my hand and it works 🙂😁

[@aaanton11]

I would check the connector for melting, Thanks for the great comments👍🏻👍🏻🛠

[@steveswainsbury4035]

Thanks . Knew what the problem was but now I know where it is

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@leecowan6366]

This has just happened on me today, thank god for this vid, I'll be sorting it out myself now 👌

[@aaanton11]

well done, Thanks for the great comments👍🏻👍🏻🛠

[@puddipatrol2324]

Mine just needed a little push and started working , cheers mate , really appreciate it 💯 had to subscribe

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@SR-sr3fh]

Worked perfect, part cost £7 on eBay. Nice one 👍

[@aaanton11]

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

[@jos80ph80]

Very helpful , thanks from Italy

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@movieboy94]

Just did this for my 2012 hatchback Corsa d, it worked thanks so much!

[@aaanton11]

Glad it helped!, Thanks for the great comments👍🏻👍🏻🛠

[@sweetscience1988]

Top man! Probably saved me a few hundred quid at the garage. Thanks!

[@aaanton11]

Glad I could help Thanks for the great comments👍🏻👍🏻🛠

[@okwyikenta876]

Fantastic 👏👏👏👏,Very helpful changed my today Thanks👍

[@aaanton11]

Great to hear! Thanks for the great comments👍🏻👍🏻🛠

[@alih8138]

Thanks mate. Saved me a good £50 if I went through the garage!

[@aaanton11]

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

[@richardtwidale3459]

Thanks for demo ,great help.now know how to do it myself

[@aaanton11]

Glad to help Thanks for the great comments👍🏻👍🏻🛠

[@anthonynewman7119]

Did the job,fiddley but your video was very helpful Thanks you😎

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@adekoiki8907]

Thanks a bunch. Awesome video. Cheap fix

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@leicfoxUK]

Great tutorial, many thanks.

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@ashleywhittaker8830]

What tool do I need to take the old one out because it isn't a normal screw thank you

[@aaanton11]

The screw is a 5mm size, tool for the job if you don't have a socket set is amzn.to/33S2Wa4 for £6 Thanks for the great comments👍🏻👍🏻🛠

[@khuramnasar549]

Haha count me in too! I just been hit with the issue tgus morning

[@ashleywhittaker8830]

Did mine this morning the size is 5.5 not 5 all done and working fine

[@mariomioc3800]

Thank you aaanton11!! Saved me some money going to garage! Greetings from Croatia!

[@aaanton11]

Great stuff, Thanks for the great comments👍🏻👍🏻🛠

[@Discover99]

That's wat is called professional video and support

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@marcelogasbarro6943]

Just did for my corsa E. Thanks for the video!!

[@aaanton11]

Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

[@MatchboxGarage]

Thank you mate. You helped me do the wife's car today 👍🏼😎💪🏼

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@dylanrayphotography3850]

Thank you, I’ve got same problem exactly .

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@fax4933]

Absolutely brilliant video well explained thank you

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@alexanderwiebe8109]

Thank you very much for this very good video. I've must resolve now this problem, too and this clip is perfect to replace this resister on my own. I learned that there should be different values ​​of resistance (or does it not matter?). Which one would be for a 2011 Vauxhall Corsa (german production)? Best Regards from germany.

[@aaanton11]

Amazon Link to buy new Heater Resistor, £9.99, amzn.to/3J3r5z0 1/4 Socket set £22 amzn.to/3868RI1 5mm.Screwdriver £6 amzn.to/33S2Wa4 Heater resistor and new connector plug £13 amzn.to/37tYVKp Thanks for the great comments👍🏻👍🏻🛠

[@danmatthews3431]

Thanks for this - mine works on every setting EXCEPT 4, any idea if it's the same issue?

[@aaanton11]

It should be. Thanks for the great comments👍🏻👍🏻🛠

[@mahmoudal-katib1560]

Thank you, this clip is very helpful ,great effort

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@jmanj5902]

Thank you so much very easy vedio to follow you saved me money. God bless you

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@simonwells61]

FABULOUS- Thank you for your work. Informative and practical

[@aaanton11]

You are so welcome! Thanks for the great comments👍🏻👍🏻🛠

[@jayland1874]

Great video! I've just ordered my new resistor as I have the same fault. Do you know if the bad resistor will cause the car and spanner light to come on? I've ran a obd check and no codes but my light is on so I'm wondering if it's down to this?.

[@aaanton11]

Not normally, the spanner light will be another fault, Thanks for the great comments👍🏻👍🏻🛠

[@LeoC3]

Same problem here, thank you very much.

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@jamieannakin2346]

Hi Anton great video. Can I ask, would this be the same solution on a Vauxhall corsa 1.2 2008 model with same issue please ?

[@aaanton11]

Yes all the same, Thanks for the great comments👍🏻👍🏻🛠

[@MrZazs]

Big Thanks just fix my corsa.

[@aaanton11]

Glad I could help Thanks for the great comments👍🏻👍🏻🛠

[@monicaalauddin4422]

Thank you so much for this and so easy to understand too you kind person

[@aaanton11]

You are so welcome! Thanks for the great comments👍🏻👍🏻🛠

[@niksonjaat7353]

Amezing video..very useful..Thank you

[@aaanton11]

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

[@mikexc90]

Did the replacement one double up on the power pins ? As normally it only has 2 power wires, the later ones have 4 pins, 2 live and 2 negative so need to also change to an new plug and add the extra 2 wires in

[@aaanton11]

It will work just leave the extra pins blank, Thanks for the great comments👍🏻👍🏻🛠

[@Esk8Nomad]

Thanks so much for the help first time fixing a issue thanks for the clear help

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@stevenchew7949]

Thanks Bro, you just saved my ass ❤

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@jamiesmitham2713]

hi could you tell why i would have low pressure coming through the vents of my Corsa d blower seems to be working fine on all 4 setting can here it but nearly no air ? thanks for these videos

[@aaanton11]

Your pollen filter might be blocked, Thanks for the great comments👍🏻👍🏻🛠

[@pooledrivingschool]

Great vid, My son has this problem with his Corsa so we ordered the part and fixed, happy days. One day later it went back to same problem, he also said he could smell a "burning smell" before and after we replaced the part. Any ideas?

[@aaanton11]

possible the connector plug is melted, or the heater motor is binding, usually the connector is the issue, new ones amzn.to/37tYVKp Thanks for the great comments👍🏻👍🏻🛠

[@john11k]

Brilliant Thank you , can get my heaters sorted now. Owe you a pint sir. 🙏☘️

[@aaanton11]

You are very welcome Thanks for the great comments👍🏻👍🏻🛠

[@adamwake1915]

Question.......was the car on the floor or up on a ramp? Almost breaking my back trying to squeeze the 2 clips together to remove the old resistor. Seems to be major ag being left handed.

[@aaanton11]

on the floor, Thanks for the great comments👍🏻👍🏻🛠

[@BaljinderSingh-cq6sh]

Great video 👍

[@aaanton11]

Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠

[@precioush7214]

I have this exact problem so thank you for sharing. My windscreen fan suddenly stopped working but there's a noise coming through. Will this fix it or is it a separate problem do you know? Thank you!

[@aaanton11]

If warm air is blowing from other vents its not this issue, Thanks for the great comments👍🏻👍🏻🛠

[@precioush7214]

@@aaanton11 That's great! Thank you for your response 🙂

[@bobdeverbouwer]

Thanks for the video man!! Made me save like €100,-👌

[@aaanton11]

Glad I could help, Thanks for the great comments👍🏻👍🏻🛠

[@vb6941]

Make this man prime minister

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@qingshenjing777]

My car's battery was flat after 3 weeks of not being used, and I have noticed exactly the same problem emerged with the heater blower after the car was jumped to start. Actually by telling from the time when the digital clock stopped working in the car the battery was drained in only 17 days. Just wondering could it be the faulty resistor accelerated the drainage of the battery? I will replace it anyway. Thanks for the video by the way!

[@aaanton11]

The resistor will not cause a drain, but the moisture accumulated with lack of use would cause corrosion finishing off the resistor. Thanks for the great comments👍🏻👍🏻🛠

[@MM-qm7jl]

Hi anton I’m wondering if my heater matrix needs to be replaced it makes a gurgle liquidy sound in the same area whilst driving

[@aaanton11]

wont be the matrix unless its leaking, possible air in the system, Thanks for the great comments👍🏻👍🏻🛠

[@All.i.need.]

Thank you!! Great video! Going to try this tomorrow

[@aaanton11]

Have fun! Thanks for the great comments👍🏻👍🏻🛠

[@ChrisTheCarBuilder]

5.5mm socket is actually correct but thanks for the how to!

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@engineunderyou]

Thanks! I'll order my replacement today

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@pirotti]

Thanks a million. Your shared content was helpfulness.

[@aaanton11]

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

[@micksharlotte9282]

Thanks very much did my self and saved a lot of money 👍

[@aaanton11]

Glad I could help Thanks for the great comments👍🏻👍🏻🛠

[@marwanoko]

Thanks for the video! I replaced mine, but it broke down again a few days later. Could it be the fusee and do you perhaps now which one it is?

[@aaanton11]

If your motor is pulling too many amps it will damage the resistor, does it work on max or has it stopped all-together Thanks for the great comments👍🏻👍🏻🛠