How to Change DTF Print Head

[@mncustom-made-barblafond6825]

Thanks for the detailed video!

[@WHOLEPRINTING]

Thanks for watching :P

[@ugilopez]

Really helpful video tks

[@WHOLEPRINTING]

[@baileywalters753]

honestly man, ive taken the print head right out and cleaned it with some 99% iso alcohol and it has worked great on many occasions

[@WHOLEPRINTING]

Same here!

[@sabrinawilliams8185]

Ty for your help it’s much appreciated My cable has a crease in it will it affect my printing

[@WHOLEPRINTING]

@@sabrinawilliams8185 thank you for your kind words happy to help! It should be okay as long as the pins on the cable is not affected

[@CornyFlakes100]

HI,THANKS FOR THE HELP,DO YOU RE USE THE OTHER PRINT HEAD OR CLEAN IT AND SWAP THEM?THANKS IN ADVANCE.

[@WHOLEPRINTING]

Email us - [e-mail]

[@HarrisFamilyCouponing]

Where did you get your print head from? Thank you for sharing.

[@WHOLEPRINTING]

I sourced it from the seller of the printer, contact them on Amazon or Skype if you have their information:)

[@orlandocallo]

Very helpful.., I would like to ask..is it the print head are same on Epson L1800? Thanks sir

[@WHOLEPRINTING]

Yes Epson L1800 but this video applies to most models anyways :)

[@jesusarellano3737]

Hello I can use the epson l805 print head on to the procolored l805 right ? It won’t affect it? It fitted perfectly and all is the same.

[@WHOLEPRINTING]

Hello, what do you mean?

[@christinagrieve6397]

@@WHOLEPRINTING think there asking , if they can use the print head that's listed as epson L805 printer on the proctored L805 DTF , I had the same Question, im assuming its Yes but Id love to here your thoughts, Im about to buy a used A4 DTF printer L805 that needs a new printhead so stumbled on this as I was looking for info :)

[@KinsleeTreadwell]

after doing this and restarting printer all lights on front are flashing and when i hit print it acts as if paper jam any ideas?

[@WHOLEPRINTING]

There’s many variables that can cause this problem to happen, are you still experiencing issues?

[@jacquelinemarshall6696]

How did you move the print head so easily? I have the same dtf printer however there is no release without turning the printer on.

[@WHOLEPRINTING]

I lift it up before sliding

[@carlosjb709]

Hey I have the same dtf printer, I’m having an issue where it is ghost printing code instead of the actual image, have you guys experienced this or have had a similar issue?

[@WHOLEPRINTING]

No sorry not sure what you're talking about... email us - [e-mail]

[@seddy21086]

Same thing. I believe it is a fuse that needs to be replaced. The inkjets aren't functioning

[@kennychengquanchua1029]

Thank you for another great video. Currently, I have an issue with the INK or waste INK leaking on the left side of the printer! Have you encountered this problem? If you have would you mind sharing a video on how to solve this issue?

[@HarrisFamilyCouponing]

Hello, Do you have this same printer?

[@WHOLEPRINTING]

Very good question! I would need to see more. If you’d like you can join our free Facebook group, I’ll be able to take a look and get back to you, link in community tab of my channel

[@kennychengquanchua1029]

@@HarrisFamilyCouponing yes I do have the same printer.

[@kennychengquanchua1029]

@@WHOLEPRINTING Great! thx and ur videos have been really helpful to us, I appreciated it.

[@WHOLEPRINTING]

@@kennychengquanchua1029 thanks grateful appreciated

[@jacquelinemarshall6696]

Do you have any idea why my prints are streaking? I am at a loss. Thank you

[@WHOLEPRINTING]

Email us! [e-mail]

[@marvingalero6313]

Hi I watched your video its really great and very helpful. Had one issue on my printer I did all the instructions from your video and when printing its not releasing ink like its printing blank pages. If you know how to solved this issues hope you can help me with it. Thank you!

[@WHOLEPRINTING]

You might need a new print head or to unclog it! Please email us - [e-mail]

[@marvingalero6313]

Thanks for the reply. Unfortunately, I just changed it with new print head. I dont know what's wrong with it.

[@WHOLEPRINTING]

@@marvingalero6313 please email us - we will try our best to fix this with you - [e-mail]

[@marvingalero6313]

Thank you will do email you

[@kimmolina4658]

I did this and now my ink light is red, what could be wrong? Any help would be appreciated. thanks

[@WHOLEPRINTING]

Your print head is either broken or not properly installed

[@chamuco97]

i did the same thing but now the printer does not power only the termo part need please help what did i do wrong ?

[@WHOLEPRINTING]

Email us - [e-mail]

[@thetweakhead3723]

I've got the same issue... is there a remedy to this?

[@chamuco97]

@@thetweakhead3723 i had to change the mother board plus the print head cable and a new print head as well and now it went back to work normally

[@wengky9228]

how often do you change a head in a year?

[@WHOLEPRINTING]

Ideally never! It’s mostly when there’s been ink inside the printer for a long time and you haven’t done the maintenance within a few days... intense clogging can occur. I haven’t changed it in my main printer and I have the main printer it’s been way over 1 year, the new one I bought got clogged because it was a used printer and during the transportation it clogged to the point of no return so buying a new print head is essential in my case! I hope this helps😁 happy printing

[@JoelArra89]

hey, do you remove the plastic from the hole on the cartridge where the ink comes out?

[@WHOLEPRINTING]

What plastic I’m a bit confused Can you send me photo on email? Thanks

[@JoelArra89]

Ok will email you but seeing a lot of stuff recently too that dtf can be dangerous to health esp like the powder 😮 right now my printer that I only got like less than a month is down, they say it's the print head and all of a sudden I start seeing videos about how hazardous it is to health

[@WHOLEPRINTING]

@@JoelArra89 I can imagine that it’s not the healthiest thing in the world… Wearing a mask and using gloves will most definitely help!

[@katiecowdell8291]

I know this video is old but I am having problems with my printer. I purchased it 5 days ago so havent really done much with it, I am having problems with black in spitting out from what looks like where the waste ink goes before coming out into the waste ink bottle. It has like a small cage with ink in. I do a head clean and it spits out everywhere. Do you have any advice please? Thank you in advance.

[@katiecowdell8291]

I forgot to add I purchased this second hand.

[@WHOLEPRINTING]

Send us an email and we can assist you with your particular case! [e-mail]

[@Ilovespace222]

I have the same printer, do you think it is a good idea ( i use mine almost daily ) to keep a printhead on hand in case of failure? I've had mine almost a year. I do regular maintenance, but I have heard that printheads need to be changed every year or so.

[@WHOLEPRINTING]

Absolutely! I always try to keep 3 print heads extra I have 3 printers so anytime something happens I got an extra one ready to go! Especially a good ideal if you print high volume

[@Ilovespace222]

@@WHOLEPRINTING Thanks for the video, and for the quick response! I just ordered one in.

[@alvaromoreira6047]

Hi where can i buy a new print head for a good a price?

[@WHOLEPRINTING]

@@alvaromoreira6047 e-mail us- [e-mail]

[@marcfrancois9]

Just my printer and I have not printed anything with it but I am getting ink out error while the ink cartridges are full

[@WHOLEPRINTING]

Do you have access to the after sales team?

[@marcfrancois9]

@@WHOLEPRINTING no communication whatsoever

[@WHOLEPRINTING]

@@marcfrancois9 that’s unfortunate ... this is why it’s important do to proper research before buying, the links I have in description are for printers that come with after sale support. I feel your pain... feel free to reach out via email - [e-mail] and we will see if we can be of any assistance

[@KevinGuzman-dr6pf]

My prints keep going bad. I do a head cleaning and then the white shows up and squirts out on my waste. Then I start a print and the white ink is good and half way through the ink stops printing. I have changed the dampers, I have cleaned the head, i have used head cleaning solution, i have sucked all the bubbles out. Nothing seems to work and im at a lost. I tried messaging my seller but they are in china so it takes so long to get any response. Please help.

[@WHOLEPRINTING]

Email us! We will get you back to printing in NO TIME👌 - [e-mail]

[@FootballHighlights-u2v]

I’m Having the same problem with my printer

[@crumble7598]

Bro you really NEED to get a gopro

[@WHOLEPRINTING]

Next video: how to change print head with POV (GoPro)

[@crumble7598]

@@WHOLEPRINTING looking fwd to it