How to change front ABS sensor on AUDI A4 B5 Saloon [TUTORIAL AUTODOC]

[@lisztamazan7647]

Just did this job you guys make some really great a detailed videos keep it up!

[@autodocuk]

Thanks for your positive comment! Stay with us!

[@alz.7716]

The axle bolt that you loosen to make room for the sensor is one time use only, because it is torque to yield. It needs to be replaced after loosening.

[@autodocuk]

Thanks for the clarification, your comment will be helpful to many of our viewers.

[@cleberdrums100]

When you pushed the sensor how much i push the sensor for inner how the distance

[@autodocuk]

It is not possible to answer your question unambiguously, you can find this information in the technical documentation for repairing your car.

[@Snowdogash]

Whats the clip with the mirror showing us? I have to do this job in a few days.

[@autodocuk]

The mechanic used a mirror to look at the distance between the sensor and the ABS gear ring.

[@Snowdogash]

​@autodocuk thanks for your response. I've bought a new sensor, and like yours it has three plugs. But the car only has one connection. Are these extras optional or do I have the wrong part?

[@Martin-zm8tj]

Is there a bolt to hold sensor in place and does the car reset itself or do you have to do something else,thanks

[@autodocuk]

We cannot tell you for sure. You can find this information in the technical documentation for repairing your car.

[@DENS973]

Does the sensor have to be touching all the way in?

[@autodocuk]

It is recommended to insert the sensor all the way. AUTODOC

[@MladenKljestan]

Thank you

[@nicerjosh21]

if so detail why you guys didn't show where the third plug goes

[@sametcanszhobipesinde8007]

Good videos.

[@theduques808]

Why do you unscrew the middle screw for? The screw that’s set on the axel.

[@vincethefadedkoala3079]

I’m wondering the same thing. Hope they respond 11 months later😅

[@TheBlaert]

I think it was incase they had to remove the driveshaft. Sometimes you have to push these sensors out from the inner side due to corrosion

[@theduques808]

How did he pushed this sensor all the way in?

[@autodocuk]

The procedure as it is shown in the video.

[@finleythornton332]

It's that easy

[@zaftra]

not when you think it's s screw out and not pull out